On therail network in Great Britain,multiple working is where two or more traction units (locomotives,diesel multiple units orelectric multiple units) are coupled together in such a way that they are all under the control of one driver (multiple-unit train control).
If the front locomotive of a pair in multiple has failed the driver can still control the rear locomotive for as long as air and electricity supplies are available on the failed locomotive.
Many main-line diesel-electric and hydraulic locomotives are capable of running in multiples of up to three under the control of one driver
— British Railways Diesel Traction Manual for Enginemen,[1]
"In tandem" is when more than one diesel or electric locomotive are hauling a single train and under the control of a driver on each locomotive.
In the early days of diesel locomotives in the 1960s, locomotives worked within their class (i.e. two locomotives of the same class could work together but not with other classes). Locomotives from different manufacturers had varying methods of controlling engines orbraking systems. If a train required more than one locomotive, an additionaldriver was needed, at extra expense.
Since then, locomotives have been built to work with other locomotives in the same code or system. Similar systems are assigned acoupling code, which is normally indicated on the front of the locomotive.
Early diesels were also fitted with communicating doors in the nose which allowed thesecondman to access thetrain heating boiler of the rearmost locomotive. The doors actually saw little use and, as they frequently caused draughts in the cab, many of them were later welded shut.
| Coupling code | System | Class of locomotives |
|---|---|---|
| ★ Blue Star | Electro-pneumatic | Class 15,Class 17 (Nos D8588–8616),Class 20,Class 21 (Nos D6138-6157),Class 24,Class 25,Class 26,Class 27,Class 31/1,Class 33,Class 37,Class 40,Class 44,Class 45,Class 46,Class 73 (under diesel power only),Class 74 (under diesel power only) |
| ● Red Circle | Electro-magnetic | Class 16,Class 21 (Nos D6100-6137),Class 28,Class 29,Class 31/0 |
| ● Green Circle | SomeClass 47s | |
| ■ Orange Square | Diesel hydraulic - 1st use | Class 22 (D6300 - 6305),Class 41 (Warship Class) |
| Symbol re-used for different system | Class 50 | |
| ◆ Red Diamond | Class D16/1 (nos 10000/10001) Class 17 (D8500–D8587) | |
| Symbol re-used for different system | Class 56,Class 58 | |
| ◆ White Diamond | Diesel hydraulic | Class 22 (D6306 - 6357),Class 42,Class 43 (Warship Class) |
| ▲ Yellow Triangle | Diesel hydraulic | Class 35 |
| SR EMU System | Class 33/1,Class 73,Class 74,Mark One Electric Multiple Units,Class 442,Class 489 | |
| AC electric locomotives | Class 87, someClass 86s | |
| Within own class only | Class 43 (HST),Class 60, someClass 68s | |
| TDM System | Class 86,Class 87,Class 89,Class 90,Class 91, Push-Pull fittedClass 47,DBSO,DVT | |
| AAR System[2] | 59,66,67,68 008–015,69,70, and73/9,[3] plus several convertedDVTs |
First-generation diesel multiple units had the additional problem of differing types oftransmission. For instance, aClass 127 unit (hydraulic transmission) could be required to work in multiple with aClass 112 unit (mechanical transmission). For this reason, the drive selector on the Class 127 was fitted with positions marked "D, 3, 2, 1" to change the gears when working in formation with vehicles with mechanical transmission.[4] However, because of damage to mechanical transmissions caused by improper gear selection on coupled hydraulic units, the Class 127 units had their coupling code changed from Blue Square to Red Triangle, which differed from Blue Square in name only and was unrelated to an earlier Red Triangle code used for theDerby Lightweight hydraulics.[5]
First-generation DMU coupling codes:
| Coupling code | Class |
|---|---|
| ■ Blue Square | Most units with mechanical transmission,Class 113,Class 127 (until 1969) |
| ◆ Yellow Diamond | Derby Lightweight (mechanical transmission),Metro-Cammell Lightweight,Class 129 |
| ▲ Red Triangle (1st use) | Derby Lightweight (hydraulic transmission) |
| ★ Orange Star | Class 125 |
| ● White Circle | Class 126 |
| ▲ Red Triangle (2nd use) | Class 127 (from 1969) |
Most second-generation units built byBritish Rail were designed to use theBSI multiple working system, including members of the 14xPacer and 15xSprinter families. Somepost-privatisation trains such as theClass 168,170 and172s[6] were fitted with BSI couplers enabling them to operate in multiple with older stock, while other incompatible systems emerged. Examples includedDellner-couplers fitted toClass 171,220,221,222,350,360,375,376,377,390,[7]700 and710s whileScharfenbergs were fitted toClass 175[8] and180s.[9] Franchise changes and stock reallocation means that manytrain operating companies use fleets with a number of incompatible multiple working systems.