-- These are EXAMPLES on the documentation page. Scroll down to see the module content.localextra_units={-- Similar to a redirect: "sqm" is an alias for "m2".-- {{convert|1.5|m2|sp=us}} → 1.5 square meters (16 sq ft)-- {{convert|1.5|sqm|sp=us}} → 1.5 square meters (16 sq ft)["sqm"]={target="m2",},-- A simple unit, showing the minimum that is required.-- The "ha" is the unit code used to identify the unit:-- {{convert|1.5|ha}} → 1.5 hectares (3.7 acres)["ha"]={name1="hectare",symbol="ha",utype="area",scale=10000,default="acre",},-- A unit which accepts an SI prefix. There is no "name1" field because it-- has to be constructed (mJ gives "millijoule"; MJ gives "megajoule").-- {{convert|125|kJ}} → 125 kilojoules (30,000 cal)["J"]={_name1="joule",_symbol="J",utype="energy",scale=1,prefixes=1,default="cal",link="Joule",},-- A unit where US and plural names are required.-- {{convert|125|cm/s2}} → 125 centimetres per second squared (4.1 ft/s²)["cm/s2"]={name1="centimetre per second squared",name1_us="centimeter per second squared",name2="centimetres per second squared",name2_us="centimeters per second squared",symbol="cm/s<sup>2</sup>",utype="acceleration",scale=0.01,default="ft/s2",link="Gal (unit)",},-- A "per" unit is defined as the ratio of two other units.-- {{convert|125|g/cm3}} → 125 grams per cubic centimetre (4.5 lb/cu in)["g/cm3"]={per={"g","cm3"},utype="density",default="lb/cuin",},-- If the automatic "per" link is not wanted, a link can be specified.-- {{convert|125|g/cm3|lk=on|disp=unit}} → [[gram]]s per [[cubic centimetre]]-- {{convert|125|g/m3|lk=on|disp=unit}} → [[density|grams per cubic metre]]["g/m3"]={per={"g","m3"},utype="density",default="lb/cuyd",link="density",},-- Characters "$" and "£" are recognized as currency symbols.-- {{convert|125|$/acre}} → $125 per acre ($310/ha)["$/acre"]={per={"$","acre"},utype="cost $ per unit area",default="$/ha",},-- An output unit can be defined as a combination of existing units.-- {{convert|2|ha|ft2 m2}} → 2 hectares (220,000 sq ft; 20,000 m²)-- Any number of output units can be specified.-- NOTE: There may be no need to define a combination because a convert-- can specify the output by joining unit codes with "+":-- {{convert|1.2|acre|ft2+yd2+m2}} → 1.2 acres (52,000 sq ft; 5,800 sq yd; 4,900 m²)["ft2 m2"]={combination={"ft2","m2"},utype="area",},-- An output unit can be defined using subunits (from least to most significant).-- {{convert|90|in|ydftin}} → 90 inches (2 yd 1 ft 6 in)["ydftin"]={combination={"in","ft","yd"},multiple={12,3},utype="length",},}
