| Maschinenpistole 35 (MP35) | |
|---|---|
Bergmann MP35 with a spare magazine and a pouch. | |
| Type | Submachine gun |
| Place of origin | Nazi Germany |
| Service history | |
| In service | 1935–1945 |
| Used by | SeeUsers |
| Wars | Chaco War Spanish Civil War World War II |
| Production history | |
| Designer | Emil Bergmann |
| Designed | 1932 |
| Manufacturer | Bergmann,Schultz & Larsen |
| Produced | 1935-1944 |
| No. built | ~40,000 |
| Variants | BMP32, Bergmann MP34 |
| Specifications | |
| Mass | Unloaded 4.24 kg (9.3 lb) |
| Length | 840 mm (33.1 in) |
| Barrel length | 200 mm (7.9 in) |
| Cartridge | 9×19mm Parabellum |
| Action | open bolt blowback |
| Rate of fire | ~540 round/min |
| Muzzle velocity | ~365 m/s (1,198 ft/s) |
| Effective firing range | 150–200 m (490–650 ft, 160–220 yds) |
| Feed system | 24- or 32-round detachablebox magazine |
| Sights | Front post, notched adjustable rear |
TheMP35 (Maschinenpistole 35,'Machine Pistol 35') was asubmachine gun used by theWehrmacht,Waffen-SS andGerman police both before and duringWorld War II. It was developed in the early 1930s by Emil Bergmann (son ofTheodor Bergmann) and manufactured at the Bergmann company inSuhl (that also built one of the first submachine guns, theMP 18).[1]
The forerunner of the MP35 was the MP32 that Danish companySchultz & Larsen produced (under licence from the Bergmann company) and which was chambered for 9×23mm Bergmann ammunition. The BMP32 design was later updated by the Bergmann factory and in 1934, the Bergmann MP34 submachine gun appeared (not to be confused with different SteyrMP34). The limited manufacturing capabilities at the Bergmann plant required production to be shifted toCarl Walther'sZella-Mehlis plant. This German company produced some 2,000 BMP34s for export and domestic sales.
Several variants of the BMP34 were manufactured with a 200mm standard or 320mm barrel. During 1935, a simplified version of the BMP34 designated as Bergmann MP35/I appeared. Initial production orders for MP35 were also placed at Walther, which made about 5,000 SMGs between 1936 and 1940.
With the outbreak ofWorld War II, production once again shifted from Walter to Junker & Ruh (manufacture code 'ajf') to manufacture the MP35 weapon (which it did through to 1944). During the war, about 40,000 Bergmann submachine guns were produced by Junker, and almost all were supplied to theWaffen-SS.
The MP35 was a blowback operated, selective fire SMG which fired from an open bolt. The weapon featured a non-reciprocating cocking handle placed at the rear of the receiver, which was operated in a similar fashion to bolt-action on aMauser rifle. This involved the weapon carrier to manually pull the handle up, pull backwards, push forwards and lock back down. When the gun was then fired the cocking handle remained stationary.
On the BMP32 the weapon featured a safety at the rear of the bolt (again in a similar location to the Mauser rifle). On both BMP34 and MP35 the safety was relocated to the left side of the receiver. The shooter could select the mode of firing by applying different pressure to the trigger – a short pull fired single shots; a long pull resulted in full automatic fire. Feed was from the right side of the gun, for some mysterious reason, with ejection to the left.
In contrast to many other SMGs of the time the MP35's magazine was inserted from the right-hand side of the weapon. Early versions used proprietary magazines, the BMP35 usedSchmeisser MP28-compatible magazines. The barrel was enclosed into tubular jacket with cooling slots and muzzle brake/compensator at the front.
{{cite book}}: CS1 maint: location missing publisher (link)| External image | |
|---|---|