Map of Pennsylvania and New York with I-86 (signed segments) highlighted in red | |||||||
| Route information | |||||||
| Maintained byPennDOT andNYSDOT | |||||||
| Existed | December 3, 1999[1]–present | ||||||
| NHS | Entire route | ||||||
| Main segment | |||||||
| Length | 244.00 mi[2][3] (392.68 km) | ||||||
| West end | |||||||
| Major intersections | |||||||
| East end | |||||||
| Eastern segment | |||||||
| Length | 10.02 mi[3] (16.13 km) | ||||||
| West end | |||||||
| East end | |||||||
| Location | |||||||
| Country | United States | ||||||
| States | Pennsylvania,New York | ||||||
| Counties | PA:Erie;Bradford NY:Chautauqua,Cattaraugus,Allegany,Steuben,Chemung,Tioga,Broome | ||||||
| Highway system | |||||||
| |||||||
Interstate 86 (I-86) is aninterstate highway that extends for 254.02 miles (408.81 km) through northwesternPennsylvania and theSouthern Tier region ofNew York, in the United States. The highway has two segments: the longer of the two begins at an interchange withI-90 east ofErie, Pennsylvania, and ends atNew York State Route 26 (NY 26) inVestal, New York, inBroome County, while the second extends fromI-81 east ofBinghamton toNY 79 inWindsor. When projects to upgrade the existingNY 17 toInterstate Highway standards are completed, I-86 will extend from I-90 near Erie to theNew York State Thruway (I-87) inWoodbury. The portion in Erie County, Pennsylvania, is known as theHopkins-Bowser Highway and is signed as such at each end. In New York, the current and future alignment of I-86 is known as theSouthern Tier Expressway west of I-81 in Binghamton and theQuickway east of I-81.
I-86 travels 7.00 miles (11.27 km) in Pennsylvania and 247.02 miles (397.54 km) in New York. Except for a section of about 1.5 miles (2.4 km) that dips into Pennsylvania at exit 60 near the New York village ofWaverly, the Pennsylvania borough ofSouth Waverly, and the section passing throughGreenfield Township fromI-90 to the Pennsylvania–New York state line, the rest of I-86 will be in New York. The section of NY 17 through South Waverly is maintained by theNew York State Department of Transportation (NYSDOT), however. The Southern Tier Expressway section of I-86 and NY 17 comprisesCorridor T of theAppalachian Development Highway System. I-86 connects toUS Route 219 (US 219) inSalamanca,I-390 nearAvoca, andI-99/US 15 just west ofCorning.
Most of the Quickway and the Southern Tier Expressway was built in stages from the 1950s to the 1980s. The I-86 designation was assigned on December 3, 1999, to the entirety of since-decommissionedPennsylvania Route 17 (PA 17) and to the westernmost 177 miles (285 km) of NY 17. It has been extended eastward as more sections of the existing NY 17 freeway have been upgraded to Interstate Highway standards, first toNY 14 inHorseheads in 2004, to NY 352 in Elmira in 2008, to the Chemung–Tioga county line in 2013, and to exit 67 (NY 26) inVestal in 2024.[4]. The segment of NY 17 between I-81 and NY 79 was designated as part of I-86 in 2006, but this segment currently remains discontinuous with the rest of I-86 while work is being done in the Binghamton area to bring NY 17 up to Interstate standards.
This sectionneeds additional citations forverification. Please helpimprove this article byadding citations to reliable sources in this section. Unsourced material may be challenged and removed.(January 2020) (Learn how and when to remove this message) |
| mi[5] | km | |
|---|---|---|
| PA | 7.00 | 11.27 |
| NY | 247.02 | 397.54 |
| Total | 254.02 | 408.81 |

I-86 begins at an interchange withI-90 in a relatively flat area of northwesternPennsylvania. It heads to the southeast, meetingPA 89 at exit 3 before curving to the east and crossing intoNew York, where it becomesconcurrent withNY 17. The freeway heads generally eastward across southwestChautauqua County, serving thehamlet ofFindley Lake and the village ofSherman viaNY 426 andNY 76, respectively, as it proceeds towardChautauqua Lake.

After crossing Chautauqua Lake, I-86 merges into an older section of freeway at exit 10 nearBemus Point; this freeway is nowNY 954J northwest of the newer extension. NY 954J runs intoNY 430, which (along withNY 394) carried NY 17 toWestfield before the 1980s extension. From Bemus Point toJamestown (exit 12), I-86 parallels the old NY 17 (now NY 430) along the northeast shore of Chautauqua Lake. TheErie Railroad extension toChicago (built as theAtlantic and Great Western Railroad) comes into Jamestown from the southwest and parallels I-86 to its junction with the Erie's original main line toDunkirk atSalamanca.
From Jamestown to Salamanca, the old NY 17 (now mostly NY 394), the new I-86 and the railroad run generally parallel through river valleys. The transportation routes run along theChadakoin River,Conewango Creek and Little Conewango Creek toSteamburg (exit 17), cutting east to theAllegheny River atColdspring there. The valley of the Allegheny takes the routes to Salamanca (exit 20), where the railroads merged, and beyond toOlean (exits 25 and 26). From Salamanca to Olean, the old NY 17 is nowNY 417. At Olean, the Allegheny River and NY 417 (old NY 17) continue southeast, while I-86 and the Erie Railroad head northeast. NY 417 does not return to I-86 until exit 44 nearPainted Post, and the Erie switches between the two alignments several times.
I-86 and the old Erie line (now part of theWestern New York and Pennsylvania Railroad) run northeast along the valleys of Olean Creek andOil Creek toCuba (exit 28). From Cuba toFriendship (exit 29), they run through a valley and over a summit, then following Van Campen Creek northeast toBelvidere (exit 30). At Belvidere, the Erie turns southeast to meet NY 417 atWellsville, but I-86 continues northeast through the valleys of theGenesee River and Angelica Creek toAngelica (exit 31), and then east along Angelica Creek, over a summit that is the highest point on the Interstate, and along Karr Valley Creek toAlmond (exit 33). This summit, at 2,110 feet (640 m) abovesea level, is the highest point along I-86, located between exits 32 (West Almond) and 33 and marked with a sign.[6]

At Almond, I-86 rejoins theErie Railroad, passing through Canacadea Creek valley about halfway toHornellsville. However, where the railroad turns southeast to Hornellsville, I-86 continues northeast across a summit and into the wideCanisteo River valley (exit 34). It leaves the valley along Carrington Creek but quickly turns east across a summit to follow Big Creek and cross another summit toHoward (exit 35). I-86 runs alongside Goff Creek from Howard to the wideCohocton River valley, where it meets the south end ofI-390 (exit 36) near Avoca and turns southeast through that valley, parallel to the Erie'sRochester–Painted Post line (Buffalo, New York, andErie Railroad).
I-86,NY 415 (oldUS 15) and the Erie branch all run southeast along the Cohocton River pastBath (exit 38) toPainted Post (exit 44), now the north end ofI-99 and US 15. NY 417 (old NY 17) also ends at exit 44, while NY 415 continues east into Corning (exits 45–46). From Painted Post through Corning toBig Flats (exit 49), I-86,NY 352 (old NY 17) and the Erie Railroad run through theChemung River valley. NY 352 begins at exit 45, west of downtown Corning, and is a recently bypassed four-lane road through Corning. East ofEast Corning (exit 48), the freeway was built as an on-the-spot upgrade of the old NY 17.

At Big Flats, the Chemung River (and NY 352) turns southeast to downtownElmira, while I-86 and the Erie continue east-northeast alongside Singsing Creek to the vicinity ofElmira Corning Regional Airport. The highway continues intoHorseheads, where it becomes an elevated highway through the use of a large arrangement of embankments and bridges. It connects toNY 14 andNY 13 via exits 52 and 54, respectively, before turning south to follow Newtown Creek into Elmira. Just east of the city's downtown district, I-86 meetsNY 352 (exit 56), then continues to the Chemung–Tioga county line.
From NY 352 onwards, I-86 straddles the Chemung River past Elmira towardsWaverly, where it briefly dips back into Pennsylvania for a few yards and intersectsU.S. Route 220 before turning back into New York, now straddling theSusquehanna River. The freeway passes by theTioga Downs racetrack and casino inNichols before an interchange withNY 96 andNY 434 inOwego.
I-86 and NY 17 continue following the Susquehanna intoBroome County with NY 434, the former NY 17, running parallel to the freeway. I-86 and NY 17 then intersects withNY 26 at a clover interchange in Vestal, with NY 17 continuing along the freeway towardsBinghamton. The I-86 designation ends here for now; however, a 9.9-mile (15.9 km) section of NY 17 just east of Binghamton is also designated as I-86, creating a temporary gap in the designation. This segment runs fromI-81 at exit 75 inKirkwood toNY 79 at exit 79 inWindsor.
The first long-distance route through the modern I-86 corridor wasNY 17, which extended fromWestfield toNew Jersey viaHarriman when it was assigned in 1924.[7] Much of NY 17 followed a routing parallel or identical to that of the modern Southern Tier Expressway and Quickway; however, it followed a more northerly routing between Westfield andBemus Point (via modernNY 394 andNY 430) and a more southerly track fromBelvidere toCorning (via what is nowNY 19 andNY 417).[8] NY 17 was realigned as part of the1930 state highway renumbering to travel directly fromOlean toWellsville on modern NY 417, located well to the south of today's Southern Tier Expressway.[9]

By the late 1940s, the portion of NY 17 through theCatskill Mountains andOrange andRockland counties had become prone to massive traffic jams due to both its winding and narrow composition and congestion in the villages andhamlets along the highway. As a result, the state ofNew York began making plans to construct an expressway leading from theNew York State Thruway at Harriman to the Catskills.[10] Construction of the NY 17 freeway began in 1947 in the Hudson Valley town ofWallkill.[11] The first section of the new freeway, a bypass ofMiddletown betweenFair Oaks (exit 118A, since removed) andGoshen (exit 123), opened to traffic in July 1951 as a realignment of NY 17. In 1954, several severe accidents occurred along parts of the surface NY 17, compelling the state to make constructing the freeway, dubbed the "Quickway", a higher priority.[10]
The road was extended east first, reachingChester (exit 127) in October 1954 and the Thruway near Harriman in August 1955.[10] To the west, a section of the highway throughSullivan andDelaware counties was built over theright-of-way of the defunctNew York, Ontario and Western Railway.[citation needed] Most of the Sullivan County section of the Quickway was completed during the 1950s, with the first section within the county—between Rock Hill (exit 108) andWurtsboro (exit 114)—opening in December 1956. A second section, from Ferndale (exit 101) to north ofLiberty (exit 98), was completed in July 1958. The gap between Wurtsboro and Fair Oaks inOrange County was filled on October 23, 1958, while the section between Ferndale and Rock Hill was completed in two stages. The section east of modern exit 104 inMonticello was opened in July 1959; the part north of that point opened in December 1960.[10]
By 1969, with the assistance of federal funding from theAppalachian Regional Commission procured by New York's US SenatorRobert F. Kennedy,[citation needed] the 130-mile (210 km) route provided nonstop access between Harriman andBinghamton, and by extensionNew York City to Binghamton. It connected the New York State Thruway (I-87) toI-81. Despite flaws in the highway's design—it included a grade-level railroad crossing nearFair Oaks (since removed) and two stretches with intersections and driveway access—the Quickway succeeded in easing travel through southern New York, cutting the driving time in half and the accident rate by 70 percent.[citation needed]

In February 1953, New York GovernorThomas E. Dewey proposed constructing four superhighways across the state to supplement the New York State Thruway. One of the four proposedlimited-access highways would cut across theSouthern Tier, linkingI-90 in the west to Binghamton in the east.[12][13] The first segments of what became known as the Southern Tier Expressway, a westward continuation of the Quickway, were completed in the mid-1960s. Four sections were opened to traffic at this time:Kennedy (exit 14) toRandolph (exit 16),Coldspring (exit 17) to westernSalamanca (exit 20),Campbell (exit 41) toCorning (exit 45), andEast Corning (exit 48) toLowman (exit 57), parts of which were built as a surface highway.[14][15] The Coldspring to Salamanca section was built out of necessity: in 1967, the firststress test of theKinzua Dam had submerged part of the original NY 17 into theAllegheny Reservoir and made it impassable. Construction of the new highway destroyed most of the town ofRed House.[16][17]
A fifth section, fromOwego (exit 65) toJohnson City (exit 69), opened in early 1969.[18] The portion of the expressway betweenNichols (exit 62) and Owego was opened to traffic on October 3, 1969.[19]

Four more segments of the Southern Tier Expressway were completed over the course of the next three years. By 1972, the gaps between Randolph and Coldspring and from Johnson City to I-81 in Binghamton were filled while the expressway was extended west from Kennedy toFalconer (exit 13) and east from Lowman toWaverly (exit 60).[20] The missing link between Waverly and Nichols was completed by 1974.[21] The portion of the freeway in and around Waverly was originally planned to be built on the right-of-way of theDelaware, Lackawanna and Western Railroad through southern Waverly; however, the plan was scrapped in favor of a more southerly alignment that passed through the borough ofSouth Waverly, Pennsylvania. The realignment saved $2 million (equivalent to $11.8 million in 2024[22]) in construction costs and spared a handful of industries in the highway's proposed path. Both state legislatures approved the realignment in 1966 after New York agreed to maintain the section of the freeway in Pennsylvania. As part of an agreement made between the two states, Pennsylvania acquired the necessary right-of-way and easements for the freeway at the expense of New York.[23][24]
Three other segments of the freeway were completed by 1974. Two of the three—fromJamestown (exit 11) and Falconer and betweenAlmond (exit 33) andCampbell—were extensions of preexisting sections while the third, connectingAllegany (exit 24) toHinsdale (exit 27), was isolated from the other portions of the highway.[21] This was only temporary, however, as the freeway was completed between Hinsdale and Belvidere (exit 30) by January 1975 and opened to traffic from Belvidere to Almond on January 30, 1975.[25] The Southern Tier Expressway was extended westward toBemus Point by 1977, initially utilizing what is nowNY 954J.[26] In the early 1980s, work began on a westward extension to the vicinity ofErie, Pennsylvania. TheFindley Lake–Bemus Point (exits 4–10) segment was completed by 1985[27][28] while the portion from I-90 east of Erie to Findley Lake was opened by 1989. From I-90 to exit 8, the freeway was initially built as asuper two highway, with both directions utilizing what are now the eastbound lanes.[29] The westbound lanes were built at a cost of $34 million (equivalent to $61.5 million in 2024[22]) and opened to traffic on October 2, 1997.[30][23]
Construction of the freeway between exits 20 and 24 was delayed for several years by members of theSeneca people, who objected to the freeway's proposed routing through theAllegany Indian Reservation. On June 29, 1976, the state of New York made an agreement with the Seneca nation that paid approximately $1.8 million (equivalent to $7.7 million in 2024[22]) to the Seneca people and property owners for the 795 acres (322 ha) of land comprising the highway's proposed routing. In addition, the state ceded 795 acres (322 ha) of land to the Seneca people—750 (300) of which were taken from the adjacentAllegany State Park—and agreed to support several tax and regulatory exemptions for the Senecas.[23][31] The transaction was completed in September 1981,[32] and construction on the segment began in 1982.[33] The portion of the expressway between exits 20 and 21 was completed by 1985.[28]

On July 21, 1985, construction was halted by protesting Senecas who did not accept the authority of the Seneca people’s leadership. The protest was organized in part by two owners of property in the path of the highway and involved the construction of an encampment on the right-of-way of the Southern Tier Expressway. The state had conducted studies on realigning the highway to bypass the disputed section;[33] however, the Indians vacated the encampment five days later. A temporary injunction prohibiting further disruptions of the highway's construction was issued in early August, allowing work on the Salamanca–Seneca Junction (exit 23) section of the expressway to resume on August 13.[34] This segment was completed by 1989[29] while the last section between Seneca Junction and Allegany was opened to traffic by 1995.[35]
Work on the Corning Bypass, a freeway around the northern and eastern fringes of the city of Corning, began in the mid-1980s. The first segment of the highway—betweenNY 414 (exit 46) and East Corning—was completed by 1989[28][29] while the rest opened in the mid-1990s. The completion of the Corning Bypass, remedying the last substantial gap in the freeway, created a continuous, mostly limited-access highway between Erie, Pennsylvania, and Harriman, New York. The completed highway, designated as PA 17 and NY 17,[35][36] served as a time-saving, toll-free alternate route to the Thruway for motorists going from theNew York City area toOhio and points west. In fact, theNew York State Thruway Authority initially opposed the highway's construction, fearing the loss of toll revenue on its own route from motoristsshunpiking via the new highway.[citation needed]
| Location | Erie County |
|---|---|
| Length | 6.997 mi[2] (11.261 km) |
| Existed | 1987–1999 |
The portion of the two-state freeway from I-90 near Erie to I-81 in Binghamton is designated as Corridor T of theAppalachian Development Highway System.[37][38] In 1998, all of PA 17 and the portion of NY 17 from thePennsylvania state line to Harriman were designated "High Priority Corridor 36" in theTransportation Equity Act for the 21st Century (TEA-21).[39] New York politicians, including SenatorDaniel Patrick Moynihan, and businesspeople backed the move in the hope that an efficient, high-speed roadway would inspire companies to start or expand their businesses in the state's southern counties.[40] Shortly after the passage of TEA-21, Corridor 36 was legislatively designated as I-86 in an amendment to the bill.[41] TheAmerican Association of State Highway and Transportation Officials (AASHTO) formally approved the designation on November 6, 1998, as "Future I-86".[42]

On December 3, 1999, all of PA 17 and the westernmost 177 miles (285 km) of NY 17 were officially designated as I-86 by theFederal Highway Administration (FHWA)[1][43] following improvements to bring the roadway up toInterstate Highway standards.[citation needed] The designation was extended eight miles (13 km) eastward toNY 14 inHorseheads on January 28, 2004,[43] after that section had been upgraded.[44] On May 1, 2006, the 10-mile (16 km) portion of NY 17 from I-81 in Binghamton east toNY 79 inWindsor was designated as part of I-86[43] following the elimination ofat-grade intersections and the reconstruction of exit ramps along the stretch. The completion of the $30-million (equivalent to $44.8 million in 2024[22]) project increased the total mileage of I-86 to 195 miles (314 km)[45] and created a temporary gap in the designation.[43]
In Horseheads, a $60-million (equivalent to $87.2 million in 2024[22]) project to elevate the highway and remove at-grade intersections in the village between NY 14 (exit 52) andNY 13 (exit 54) began in April 2004 and was completed on August 20, 2007.NYSDOT subsequently sought permission from the FHWA to extend I-86 over the new bypass and the existing NY 17 freeway toNY 352 in Elmira;[46] it was granted on March 28, 2008, adding another 5.9 miles (9.5 km) to the route.[47]
A 6.5-mile (10.5 km) portion of NY 17 between exits 56 and 59 originally had several at-grade intersections. Work on a project to eliminate the junctions began in January 2010.[48] Three discontinuous sections ofCounty Route 60 (CR 60, named Brant Road, Oneida Road, and Old NY 17), a parallel surface road, were linked together as part of the project.[37] Two of the three at-grade junctions with CR 60—the east junction with Brant Road and the west junction with Oneida Road—were permanently closed on March 24, 2010, to allow construction to begin on the new alignment of the county route between the two locations.[49] The $65-million (equivalent to $87.5 million in 2024[22]) project was completed on November 1, 2012.[48]
On November 14, 2024, NYSDOT announced the extension of the I-86 designation from exit 60 to exit 67 (NY 26) inVestal.[50]


In 1998, GovernorGeorge Pataki signed legislation to convert the entirety ofNY 17 to an interstate and stated that the conversion would be fully completed by 2009.[51] However, a severe lack of funding has pushed the completion date back. As of 2020[update], the only portion west of Binghamton not officially designated as I-86 is between theChemung–Tioga county line and the junction withI-81. The designation on this segment cannot be applied before NYSDOT completes the Prospect Mountain construction project at the junction of I-81,US 11, NY 17, andNY 7 in Binghamton,[52] which when complete will bring the roadway up toInterstate Highway standards. The official completion of the project was set for December 2020.[53] The project has since been completed, but as of February 2022, the segment is still not officially designated as I-86.[54]
Work on converting the portion of the highway east of Windsor is expected to be far more substantial than the work west of Binghamton.[51] Aside from numerous minor interchange improvements, major work includes constructing two new interchanges in the mountainousHale Eddy area, exits 85 and 86, to replace two at-grade intersections, as well as the relocation of driveways in that area, improving curve radiuses throughout the route, and widening the shoulders on narrow parts of the highway. Work was completed in November 2019 on a redesigned interchange at exit 131, where NY 17 meets I-87 andNY 32.[55] Construction to bring exits 124 and 125 inGoshen up to Interstate standards, with the latter being a brand new exit, was expected to be completed in early 2020, but was delayed.[56] In December 2020, NYSDOT completed construction of the new exit 125, which was built to accommodate the newLegoland New York. As part of the project, afour-ramp parclo was built, which replaced the prior exit 125, located 4,000 feet (1.2 km) west. NY 17 was also expanded to three lanes in each direction between exits 124 and 125. Harriman Drive was expanded to two lanes in each direction between the exit and Legoland's entrance as well.[57][58] Exit 122 has also been upgraded to interstate standards.[59] There is no timetable for the full completion of the I-86 conversion between NY 79 in Windsor and the thruway (I-87) in Harriman. Nevertheless, the segment betweenBloomingburg and Goshen is signed as I-86 and NY 17 despite not officially being part of I-86.
In October 2022, GovernorKathy Hochul announced that a draft environmental impact statement on upgrading Route 17 to transform it into Interstate 86 was underway, public outreach was expected early in 2023, and that up to $1 billion was available for the work.[60][61]
Pennsylvania usesmilepost-based exit numbers on its Interstate Highways; other I-86 exits arenumbered sequentially.
| State | County | Location[62] | mi[2][62][3] | km | Old exit [63] | New exit [63] | Destinations | Notes |
|---|---|---|---|---|---|---|---|---|
| Pennsylvania | Erie | Greenfield Township | 0.00 | 0.00 | 1 | Western terminus; signed as exits 1A (west) and 1B (east); exit 37 on I-90 | ||
| 3.73 | 6.00 | 2 | 3 | |||||
| Pennsylvania–New York state line | 7.00 0.00 | 11.27 0.00 | ||||||
| New York | Chautauqua | Mina | 1.07 | 1.72 | 4 | |||
| Village of Sherman | 9.22 | 14.84 | 6 | |||||
| North Harmony | 15.42 | 24.82 | 7 | Panama,Chautauqua Institution | Access viaCR 33 | |||
| 18.93 | 30.46 | 8 | ||||||
| North Harmony–Ellery line | 19.59 | 31.53 | Chautauqua Lake Chautauqua County Veterans Memorial Bridge | |||||
| Ellery | 20.29 | 32.65 | 9 | Eastbound exit and westbound entrance | ||||
| 20.36 | 32.77 | 10 | Left exit and entrance eastbound; access viaNY 954J; Bemus Point not signed eastbound | |||||
| Ellicott | 26.31 | 42.34 | 11 | Strunk Road (NY 953B) | ||||
| 28.09 | 45.21 | 12 | ||||||
| 30.79 | 49.55 | 13 | ||||||
| Poland | 36.04 | 58.00 | 14 | |||||
| Cattaraugus | Randolph | 39.43 | 63.46 | 15 | School House Road (NY 953A) | |||
| 41.48 | 66.76 | 16 | West Main Street (NY 952M) –Randolph,Gowanda | |||||
| Coldspring | 47.98 | 77.22 | 17 | Eastern terminus of NY 394; access to Onoville viaNY 950A | ||||
| 50.02 | 80.50 | Allegheny Reservoir | ||||||
| 50.73 | 81.64 | 18 | ||||||
| Red House | 54.56 | 87.81 | 19 | Allegany State Park, Red House Area | ||||
| City of Salamanca | 58.26 | 93.76 | 20 | |||||
| 60.58 | 97.49 | 21 | Western end of US 219 concurrency | |||||
| Carrollton | 67.67 | 108.90 | 23 | Eastern end of US 219 concurrency; US 219 Bus. not signed | ||||
| 68.26 | 109.85 | Allegheny River | ||||||
| Town of Allegany | 74.22 | 119.45 | 24 | Access via West Five Mile Road | ||||
| Olean | 77.45 | 124.64 | 25 | Buffalo Street (NY 954E) –Olean | ||||
| 78.94 | 127.04 | 26 | ||||||
| Hinsdale | 84.86 | 136.57 | 27 | |||||
| Allegany | Village of Cuba | 91.52 | 147.29 | 28 | ||||
| Friendship | 98.89 | 159.15 | 29 | |||||
| Amity | 104.60 | 168.34 | 30 | |||||
| Village of Angelica | 108.70 | 174.94 | 31 | Angelica | Access via Peacock Hill Road | |||
| West Almond | 115.92 | 186.56 | 32 | |||||
| Village of Almond | 123.65 | 199.00 | 33 | Access viaNY 962A | ||||
| Steuben | Hornellsville | 128.10 | 206.16 | Canisteo River | ||||
| 128.35 | 206.56 | 34 | Signed as exits 34A (south) and 34B (north) | |||||
| Howard | 138.01 | 222.11 | 35 | Access viaNY 962B | ||||
| Avoca | 145.10 | 233.52 | 36 | Buffalo not signed eastbound; southern terminus of I-390 | ||||
| Bath | 146.35 | 235.53 | 37 | |||||
| Village of Bath | 149.54 | 240.66 | 38 | Southern terminus of NY 54 | ||||
| Bath | 152.72 | 245.78 | 39 | Access viaNY 960U | ||||
| Savona | 156.48 | 251.83 | 40 | |||||
| Campbell | 161.23 | 259.47 | 41 | |||||
| 164.60 | 264.90 | 42 | Access to Coopers Plains viaNY 960M; southern terminus of CR 26 | |||||
| Erwin | 167.56 | 269.66 | 43 | |||||
| 168.65 | 271.42 | 44A | Robert Dann Drive not signed eastbound; northern terminus and exits 12-13A on I-99 | |||||
| 44B | ||||||||
| Riverside | 169.60 | 272.94 | 45 | Signed for NY 352 eastbound, NY 415 westbound; western terminus of NY 352 | ||||
| City of Corning | 171.55 | 276.08 | 46 | Access toCorning Museum of Glass | ||||
| Town of Corning | 174.19 | 280.33 | 47 | Access viaNY 961Q | ||||
| 176.57 | 284.16 | 48 | ||||||
| Chemung | Big Flats | 178.84 | 287.82 | 49 | Big Flats | Access via Bridge Street | ||
| 180.60 | 290.65 | 50 | ||||||
| 182.31 | 293.40 | 51A | Chambers Road –Shopping Malls | |||||
| 51B | Colonial Drive –Shopping Malls | Westbound exit only | ||||||
| Village of Horseheads | 183.91– 184.39 | 295.97– 296.75 | 52A | Commerce Center Road (CR 64 west) | Eastbound exit and entrance | |||
| Westbound exit and entrance | ||||||||
| 52B | Eastbound exit and entrance | |||||||
| Westbound exit only | ||||||||
| 185.28 | 298.18 | 53 | Horseheads | Access via Grand Central Avenue | ||||
| Horseheads | 186.04 | 299.40 | 54 | Horseheads not signed eastbound | ||||
| Elmira | 190.20 | 306.10 | 56-57 | 56 | Eastern terminus of NY 352 | |||
| Ashland | 196.00 | 315.43 | 58 | 57 | ||||
| Chemung | 197.96 | 318.59 | 58 | |||||
| 201.24 | 323.86 | 59 | Eastern terminus of NY 427 | |||||
| 203.51 | 327.52 | 59A | Wilawana, PA | Access via White Wagon Road | ||||
| Chemung River | 205.04 | 329.98 | Chemung–Tioga county line | |||||
| 205.40 | 330.56 | New York–Pennsylvania state line | ||||||
| Pennsylvania | Bradford | South Waverly | 205.51 | 330.74 | 60 | Maintained by NYSDOT; northern terminus of US 220 | ||
| 205.60 | 330.88 | Pennsylvania–New York state line | ||||||
| New York | Tioga | Waverly | 206.44 | 332.23 | 61 | Southern terminus of NY 34; northern terminus of PA 199 | ||
| Nichols | 214.53 | 345.25 | 62 | |||||
| 219.26 | 352.86 | 63 | Lounsberry | Access via CR 509 | ||||
| Village of Owego | 64 | Eastbound exit and entrance; southern terminus of NY 96 | ||||||
| Westbound exit and entrance; access viaNY 434 | ||||||||
| Town of Owego | 225.50 | 362.91 | 65 | Access to NY 17C viaNY 960J | ||||
| 230.99 | 371.74 | 66 | Access to NY 17C viaNY 962J | |||||
| Broome | Vestal | 237.00 | 381.41 | 67 | Signed as exits 67S (south) and 67N (north) | |||
| – | Continuation east; eastern end of NY 17 concurrency | |||||||
| Gap in designation; seeNY 17 | ||||||||
| Kirkwood | 249.62 | 401.72 | 75 | Access to US 11 viaNY 990G; exit 8A on I-81; current western terminus; western end of NY 17 concurrency | ||||
| 251.31 | 404.44 | 76 | Haskins Road / Foley Road | |||||
| Windsor | 253.00 | 407.16 | 77 | Windsor | Access viaCR 217 | |||
| 256.25 | 412.39 | 78 | Dunbar Road –Occanum | |||||
| Village of Windsor | 259.64 | 417.85 | 79 | |||||
| – | Eastern end of NY 17 concurrency; continuation east | |||||||
1.000 mi = 1.609 km; 1.000 km = 0.621 mi
| ||||||||
The portion of the route referred to in subsection (c)(36) is designated as Interstate Route I–86.