 | This article'slead sectionmay be too short to adequatelysummarize the key points. Please consider expanding the lead toprovide an accessible overview of all important aspects of the article.(June 2023) |
ISO 216 is aninternational standard forpaper sizes, used around the world except in North America and parts of Latin America. The standard defines the "A", "B" and "C" series of paper sizes, which includes theA4, the most commonly available paper size worldwide. Two supplementary standards,ISO 217 andISO 269, define related paper sizes; theISO 269 "C" series is commonly listed alongside the A and B sizes.
All ISO 216, ISO 217 and ISO 269 paper sizes (except some envelopes) have the sameaspect ratio,√2:1, within rounding tomillimetres. This ratio has the unique property that when cut or folded in half widthways, the halves also have the same aspect ratio. Each ISO paper size is one half of the area of the next larger size in the same series.[1]
| Size | A series formats | B series formats | C series formats | ||||||
|---|---|---|---|---|---|---|---|---|---|
| name | mm | inches | name | mm | inches | name | mm | inches | |
| −2 | 4A0 | 1682 × 2378 | 66.2 × 93.6 | ||||||
| −1 | 2A0 | 1189 × 1682 | 46.8 × 66.2 | 2B0 | 1414 × 2000 | 55.7 × 78.7 | 2C0 | 1297 x 1834 | 51.1 x 72.2 |
| 0 | A0 | 841 × 1189 | 33.1 × 46.8 | B0 | 1000 × 1414 | 39.4 × 55.7 | C0 | 917 × 1297 | 36.1 × 51.1 |
| 1 | A1 | 594 ×841 | 23.4 × 33.1 | B1 | 707 × 1000 | 27.8 × 39.4 | C1 | 648 ×917 | 25.5 × 36.1 |
| 2 | A2 | 420 ×594 | 16.5 × 23.4 | B2 | 500 ×707 | 19.7 × 27.8 | C2 | 458 ×648 | 18.0 × 25.5 |
| 3 | A3 | 297 ×420 | 11.7 × 16.5 | B3 | 353 ×500 | 13.9 × 19.7 | C3 | 324 ×458 | 12.8 × 18.0 |
| 4 | A4 | 210 ×297 | 8.3 × 11.7 | B4 | 250 ×353 | 9.8 × 13.9 | C4 | 229 ×324 | 9.0 × 12.8 |
| 5 | A5 | 148 ×210 | 5.8 ×8.3 | B5 | 176 ×250 | 6.9 ×9.8 | C5 | 162 ×229 | 6.4 ×9.0 |
| 6 | A6 | 105 ×148 | 4.1 ×5.8 | B6 | 125 ×176 | 4.9 ×6.9 | C6 | 114 ×162 | 4.5 ×6.4 |
| 7 | A7 | 74 ×105 | 2.9 ×4.1 | B7 | 88 ×125 | 3.5 ×4.9 | C7 | 81 ×114 | 3.2 ×4.5 |
| 8 | A8 | 52 ×74 | 2.0 ×2.9 | B8 | 62 ×88 | 2.4 ×3.5 | C8 | 57 ×81 | 2.2 ×3.2 |
| 9 | A9 | 37 ×52 | 1.5 ×2.0 | B9 | 44 ×62 | 1.7 ×2.4 | C9 | 40 ×57 | 1.6 ×2.2 |
| 10 | A10 | 26 ×37 | 1.0 ×1.5 | B10 | 31 ×44 | 1.2 ×1.7 | C10 | 28 ×40 | 1.1 ×1.6 |
 |  |  | |||||||
The oldest known mention of the advantages of basing a paper size on anaspect ratio of is found in a letter written on 25 October 1786 by the German scientistGeorg Christoph Lichtenberg toJohann Beckmann, both at theUniversity of Göttingen.[2] Early variants of the formats that would become ISO paper sizes A2, A3, B3, B4, and B5 then evolved in France, where they were listed in a 1798 French law on taxation of publications (French:Loi sur le timbre (Nº 2136)) that was based in part on page sizes.[3]
Searching for a standard system of paper formats on a scientific basis atthe Bridge association (German:Die Brücke), as a replacement for the vast variety of other paper formats that had been used before, in order to make paper stocking and document reproduction cheaper and more efficient, in 1911Wilhelm Ostwald proposed, over a hundred years after the 1798 French law,[3] a global standard – aworld format (Weltformat) – for paper sizes based on the ratio, referring to the argument advanced by Lichtenberg's 1786 letter, but linking this to themetric system using 1centimetre (0.39 in) as the width of the base format.Walter Porstmann [de] argued in a long article published in 1918, that a firm basis for the system of paper formats, which deal with surfaces, ought not be the length but the area; that is, linking the system of paper formats to the metric system using the square metre rather than the centimetre, constrained by and area square metre, where is the length of the shorter side and is the length of the longer side, for the second equation both in metres. Porstmann also argued that formats forcontainers of paper, such as envelopes, should be 10% larger than the paper format itself.
In 1921, after a long discussion and another intervention by Porstmann, the Standardisation Committee of German Industry (Normenausschuß der deutschen Industrie, or NADI in short), which is theGerman Institute for Standardisation (Deutsches Institut für Normung, or DIN in short) today, published German standardDI Norm 476 the specification of four series of paper formats with ratio, with series A as the always preferred formats and basis for the other series. All measures are rounded to the nearest millimetre. A0 has a surface area of 1 square metre (11 sq ft) up to arounding error, with a width of 841 millimetres (33.1 in) and height of 1,189 millimetres (46.8 in), so an actual area of 0.999949 square metres (10.76336 sq ft); A4 is recommended as standard paper size for business, administrative and government correspondence; and A6 for postcards. Series B is based on B0 with width of 1 metre (3 ft 3 in), C0 is 917 by 1,297 millimetres (36.1 in × 51.1 in), and D0 771 by 1,090 millimetres (30.4 in × 42.9 in). Series C is the basis for envelope formats.
The DIN paper-format concept was soon introduced as a national standard in many other countries, for example, Belgium (1924), Netherlands (1925), Norway (1926), Switzerland (1929), Sweden (1930), Soviet Union (1934), Hungary (1938), Italy (1939), Finland (1942), Uruguay (1942), Argentina (1943), Brazil (1943), Spain (1947), Austria (1948), Romania (1949), Japan (1951), Denmark (1953), Czechoslovakia (1953), Israel (1954), Portugal (1954), Yugoslavia (1956), India (1957), Poland (1957), United Kingdom (1959), Venezuela (1962), New Zealand (1963), Iceland (1964), Mexico (1965), South Africa (1966), France (1967), Peru (1967), Turkey (1967), Chile (1968), Greece (1970), Zimbabwe (1970), Singapore (1970), Bangladesh (1972), Thailand (1973), Barbados (1973), Australia (1974), Ecuador (1974), Colombia (1975) and Kuwait (1975).
It finally became both an international standard (ISO 216) as well as the officialUnited Nations document format in 1975, and it is today used in almost all countries in the world, with the exception of several countries in the Americas.
In 1977, a large German car manufacturer performed a study of the paper formats found in their incoming mail and concluded that out of 148 examined countries, 88 already used the A series formats.[4]
The main advantage of this system is its scaling.Rectangular paper with an aspect ratio of has the unique property that, when cut in two across the midpoints of the longer sides, each half has the same aspect ratio as the whole sheet before it was divided. Equivalently, if one lays two same-sized sheets of paper with an aspect ratio of side by side along their longer side, they form a larger rectangle with the aspect ratio of and double the area of each individual sheet.
The ISO system of paper sizes exploits these properties of the aspect ratio. In each series of sizes (for example, series A), the largest size is numbered 0 (so in this case A0), and each successive size (A1, A2, etc.) has half the area of the preceding sheet and can be cut by halving the length of the preceding size sheet. The new measurement is rounded down[dubious –discuss] to the nearest millimetre. A foldedbrochure can be made by using a sheet of the next larger size (for example, an A4 sheet is folded in half to make a brochure with size A5 pages). An officephotocopier or printer can be designed to reduce a page from A4 to A5 or to enlarge a page from A4 to A3. Similarly, two sheets of A4 can be scaled down to fit one A4 sheet without excess empty paper.
This system also simplifies calculating the weight of paper. UnderISO 536, paper'sgrammage is defined as a sheet's mass ingrams (g) per area insquare metres (unit symbol g/m2; the nonstandard abbreviation "gsm" is also used).[5] One can derive the weight of other sizes byarithmetic division. A standard A4 sheet made from80 g/m2 paper weighs 5 grams (0.18 oz), as it is1⁄16 (four halvings, ignoring rounding) of an A0 page. Thus the weight, and the associatedpostage rate, can be approximated easily by counting the number of sheets used.
ISO 216 and its related standards were first published between 1975 and 1995:
Paper in the A series format has an aspect ratio of√2 (≈ 1.414, when rounded). A0 is defined so that it has an area of 1 m2 (11 sq ft) before rounding to the nearest 1 millimetre (0.039 in). Successive paper sizes in the series (A1, A2, A3, etc.) are defined by halving the area of the preceding paper size and rounding down, so that the long side ofA(n + 1) is the same length as the short side of An. Hence, each next size is nearly exactly half the area of the prior size. So, an A1 page can fit two A2 pages inside the same area.
The most used of this series is the size A4, which is 210 mm × 297 mm (8.27 in × 11.7 in) and thus almost exactly1⁄16 square metre (0.0625 m2; 96.8752 sq in) in area. For comparison, theletter paper size commonly used in North America (8+1⁄2 in × 11 in; 216 mm × 279 mm) is about6 mm (0.24 in) wider and18 mm (0.71 in) shorter than A4. Then, the size of A5 paper is half of A4, i.e.148 mm ×210 mm (5.8 in ×8.3 in).[6][7]
The geometric rationale for using thesquare root of 2 is to maintain the aspect ratio of each subsequent rectangle after cutting or folding an A-series sheet in half, perpendicular to the larger side. Given a rectangle with a longer side,x, and a shorter side,y, ensuring that its aspect ratio,x/y, will be the same as that of a rectangle half its size,y/x/2, which means thatx/y =y/x/2, which reduces tox/y =√2; in other words, an aspect ratio of1:√2.
AnyAn paper can be defined asAn =S ×L, where (measuring in metres)
Therefore
etc.
The B series is defined in the standard as follows: "A subsidiary series of sizes is obtained by placing thegeometrical means between adjacent sizes of the A series in sequence." The use of the geometric mean makes each step in size: B0, A0, B1, A1, B2 ... smaller than the previous one by the same factor. As with the A series, the lengths of the B series have the ratio√2, and folding one in half (and rounding down to the nearest millimetre) gives the next in the series. The shorter side of B0 is exactly 1 metre.
There is also an incompatible Japanese B series which theJIS defines to have 1.5 times the area of the corresponding JIS A series (which is identical to the ISO A series).[8] Thus, the lengths of JIS B series paper are√1.5 ≈ 1.22 times those of A-series paper. By comparison, the lengths of ISO B series paper are4√2 ≈ 1.19 times those of A-series paper (and√2 ≈ 1.41 times the area).
AnyBn paper (according to the ISO standard) can be defined asBn =S ×L, where (measuring in metres)
Therefore
etc.
The C series formats are geometric means between the B series and A series formats with the same number (e.g. C2 is the geometric mean between B2 and A2). The width to height ratio of C series formats is√2 as in the A and B series. A, B, and C series of paper fit together as part of ageometric progression, with ratio of successive side lengths of8√2, though there is no size half-way between Bn andA(n − 1): A4, C4, B4, "D4", A3, ...; there is such a D-series in theSwedish extensions to the system. The lengths of ISO C series paper are therefore8√2 ≈ 1.09 times those of A-series paper.
The C series formats are used mainly forenvelopes. An unfolded A4 page will fit into a C4 envelope. Due to same width to height ratio, if an A4 page is folded in half so that it is A5 in size, it will fit into a C5 envelope (which will be the same size as a C4 envelope folded in half).
AnyCn paper can be defined asCn =S ×L, where (measuring in metres)
Therefore
etc.
The tolerances specified in the standard are:
These are related to comparison between series A, B and C.
The ISO 216 formats are organized around the ratio 1:√2; two sheets next to each other together have the same ratio, sideways.
In scaled photocopying, for example, two A4 sheets reduced to A5 size fit exactly onto one A4 sheet, and an A4 sheet in magnified size onto an A3 sheet; in each case, there is neither waste nor want.
The principal countries not generally using the ISO paper sizes are the United States and Canada, which useNorth American paper sizes. Although many Latin American countries have also officially adopted the ISO 216 paper format, Mexico, Panama, Peru, Colombia, the Philippines, and Chile also use mostly U.S. paper sizes.
Rectangular sheets of paper with the ratio 1:√2 are popular inpaper folding, such asorigami, where they are sometimes called "A4 rectangles" or "silver rectangles".[9] In other contexts, the term "silver rectangle" can also refer to a rectangle in the proportion 1:(1 + √2), known as thesilver ratio.
An adjunct to the ISO paper sizes, particularly the A series, are the technical drawing line widths specified inISO 128. For example, line type A ("Continuous - thick", used for "visible outlines") has a standard thickness of 0.7 mm on an A0-sized sheet, 0.5 mm on an A1 sheet, and 0.35 mm on A2, A3, or A4.[10]
The matchingtechnical pen widths are 0.13, 0.18, 0.25, 0.35, 0.5, 0.7, 1.0, 1.40, and 2.0 mm, as specified inISO 9175-1. Colour codes are assigned to each size to facilitate easy recognition by the drafter. Like the paper sizes, these pen widths increase by a factor of√2, so that particular pens can be used on particular sizes of paper, and then the next smaller or larger size can be used to continue the drawing after it has been reduced or enlarged, respectively.[4][11]
| Linewidth (mm) | 0.10 | 0.13 | 0.18 | 0.25 | 0.35 | 0.50 | 0.70 | 1.0 | 1.4 | 2.0 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Colour | Maroon | Violet | Red | White | Yellow | Brown | Blue | Orange | Green | Gray | ||||||||||
The earlierDIN 6775 standard upon which ISO 9175-1 is based also specified a term and symbol for easy identification of pens and drawing templates compatible with the standard, calledMicronorm, which may still be found on some technical drafting equipment.
DIN 476 provides for formats larger than A0, denoted by a prefix factor. In particular, it lists the formats 2A0 and 4A0, which are twice and four times the size of A0 respectively:
| Name | mm × mm | inch × inch |
|---|---|---|
| 4A0 | 1682 × 2378 | 66+5⁄24 × 93+5⁄8 |
| 2A0 | 1189 × 1682 | 46+19⁄24 × 66+5⁄24 |
While not formally defined, ISO 216:2007 notes them in the table ofMain series of trimmed sizes (ISO A series) as well: "The rarely used sizes [2A0 and 4A0] which follow also belong to this series." 2A0 is also known by other unofficial names like "A00".[12]
