IEC 61162 is a collection ofIEC standards for "Digital interfaces for navigational equipment within a ship".
The 61162 standards are developed in Working Group 6 (WG6) of Technical Committee 80 (TC80) of the IEC.
StandardIEC 61162 is divided into the following parts:
The 61162 standards are all concerning the transport ofNMEA sentences, but the IECdoes not define any of these. This is left to theNMEA Organization.
Single talker and multiple listeners.
Single talker and multiple listeners, high-speed transmission.
Serial data instrument network, multiple talker-multiple listener, prioritized data.
Multiple talkers and multiple listeners.
This subgroup of TC80/WG6 has specified the use of Ethernet for shipboard navigational networks. The specification describes the transport of NMEA sentences as defined in 61162-1 over IPv4. Due to the low amount of protocol complexity it has been nicknamed Lightweight Ethernet or LWE in short.[2][3]
There are three revision: the original published in 2011, and updates in 2018 and 2024.[4]
IEC 61162-460:2015(E) is an add-on to the IEC 61162-450 standard. This standard extends the informative guidance given in Annex D of IEC 61162-450:2011. The first edition was published in August 2015.
State May 2016 is the first bridge and system manufacturers beginning with the implementation of IEC 61162-450 and IEC 61162-460.
IEC 61162-460:2024 (also referred to as IEC 61162-460 Edition 3.0) is an updated add-on to IEC 61162-450. This standard extends the informative guidance given in Annex D of IEC 61162-450:2011. The third edition was published in April 2024.
Known devices with -450 implementation:
Known devices/systems with -460 implementation: