This articleneeds additional citations forverification. Please helpimprove this article byadding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "IEC 60228" – news ·newspapers ·books ·scholar ·JSTOR(October 2014) (Learn how and when to remove this message)

IEC 60228 is theInternational Electrotechnical Commission (IEC)'sinternational standard onconductors of insulated cables. As of 2023^[update] the current version is Third Edition 2004-11^[1]Among other things, it defines a set of standard wire cross-sectional areas:

In engineering applications, it is often most convenient to describe awire in terms of its cross-section area, rather than itsdiameter, because the cross section is directly proportional to its strength and weight, and inversely proportional to itsresistance. The cross-sectional area is also related to the maximumcurrent that a metallic wire can carry safely.

This document is one consideredfundamental in that it does not contain reference to any other standard.

The document describes several aspects of the conductors for electrical cables

This refers to the flexibility and thermal effects i.e temperature of a conductor.

• Class 1: Solid conductor
• Class 2: Stranded conductor intended for fixed installation
• Class 5: Flexible conductor
• Class 6: Very Flexible conductor

Thenominal (see below) cross-sectional area for standard conductors including the following:

• Class 2: Minimum number of strands required to make particular conductor size
• Class 5 and 6: Maximum diameter of any component strand of the conductor

The maximum permissible resistance per unit length (in ohms per kilometre – Ω/km) of each conductor size, class and type (both plain copper and metal coated)

This document and its precursors were created due to a need for a standard definition of cable conductor size. The main problem being that not all copper has the same resistivity value, so, for example, a 4 mm² conductor from two different suppliers may have different resistance values. Instead this document describes conductors by theirnominal size, determined by resistance rather than physical dimensions. This is a key distinction as it makes a standardized definition of conductors based solely on their electrical characteristics.

Almost all characteristics of conductors, resistance, current carrying capacity etc. are dependent on the physical dimensions of the conductor. However this document allows an easy reference whereby the standard conductor sizes and reference to physical dimensions are maintained but given an exact meaning in terms of the electrical characteristics of a conductor.

• Circular mil, Unusual unit used as the North American Electrical industry standard for wires larger than 4/0.
• American wire gauge (AWG), used primarily in the US and Canada
• Standard wire gauge (SWG), the British imperial standard BS3737, superseded by the metric.
• Stubs Iron Wire Gauge
• Jewelry wire gauge
• Body jewelry sizes
• Electrical wiring
• Number 8 wire, a term used in the New Zealand vernacular

• "IEC 60228" atInternational Electrotechnical Commission

This engineering-related article is astub. You can help Wikipedia byexpanding it.

• v
• t
• e

• IEC standards
• Wire gauges
• Engineering stubs

• Articles with short description
• Short description is different from Wikidata
• Use Oxford spelling from December 2011
• Articles needing additional references from October 2014
• All articles needing additional references
• Articles containing potentially dated statements from 2023
• All articles containing potentially dated statements
• All stub articles