Personal System/2 Model 80

A PS/2 Model 80 with dual floppy drives
Developer	International Business Machines Corporation (IBM)
Manufacturer	IBM
Product family	Personal System/2
Type	Personal computer
Released	April 2, 1987; 38 years ago (1987-04-02)
Availability	July 1987
Lifespan	1987–1992
Discontinued	1992 (1992)
Media	1.44 MB 3.5-in floppy disks
CPU	Intel 386 at 16–25 MHz
Storage	44–320 MB hard drive
Graphics	Video Graphics Array
Power	120/240 VAC ～
Predecessor	Personal Computer/AT
Related	List of IBM PS/2 models

ThePersonal System/2 Model 80 (typeset on the badge as thePersonal System/2 Model 80 386) is a high-end desktop computer inIBM'sPersonal System/2 (PS/2) family of personal computers. First released in July 1987, the Model 80 features the 32-bitIntel 386 processor running at aclock speed of 16 MHz. The Model 80 was built into atower case, the same one as its 16-bit counterpart thePS/2 Model 60. It has several 32-bitMCA expansion slots—the only PS/2 model to include such slots at the time of its release—and between five and sixdrive bays. The PS/2 Model 80 was the highest-end PS/2 in the original 1987 line-up and was IBM's first PC based on the 386 processor. The Model 80 received several updates over the course of its lifespan, increasing the computer's hard drive capacity as well as the clock speed of its processor and the maximum supportedRAM. IBM discontinued the Model 80 in 1992.

IBM announced the PS/2 Model 80 on April 2, 1987, alongside the entirePersonal System/2 line, which represented IBM's second generation of personal desktop computers after the originalIBM PC was launched in 1981. The original PS/2 line-up included the low-endPS/2 Model 30, the midrangePS/2 Model 50, the higher-endPS/2 Model 60, and the highest-end Model 80.^[1][2] All but the Model 80 were available to buy immediately that April; the first units of the PS/2 Model 80 were slated for a late 1987 release,^[2] but owing to delays in shipping the Model 60 in mass volume, the Model 80's release date was moved up^[3]: 1 to early July 1987 to fulfill demand.^[4][5]

The chief engineer behind the Model 80 was Mark Dean, who previously headed development of thePC AT and theISA bus.^[6] The Model 80 was initially manufactured at IBM's facility inBoca Raton, Florida, along with the Model 30, Model 50, and Model 80. In early 1989, IBM moved manufacturing of PS/2s from Boca Raton toRaleigh, North Carolina, after having shut down their production lines reserved for computer systems in Florida to make way for other products. The new production lines in Raleigh featured a greater degree of factory automation, intended to hasten the production of computers. Significant defects engendered by this new machinery led to shortages of the Model 80 in 1989, however, which was then in high demand amid growing commercial interest inlocal area networking (LAN).^[7]: 1

The PS/2 Model 80 was IBM's first personal computer to feature the 32-bitIntel 80386 processor.^[1][2] It was not, however, the first IBM PC–derived computer system to feature a 386 processor; that distinction belongs toCompaq'sDeskpro 386, released in September 1986. The Deskpro 386 was the first implementation of the 80386 processor in a computer system for sale to the public,^[8] bringing the PC platform into the 32-bit era and earning Compaq a reputation as a standards-setter forIBM PC compatibility, rather than merely a follower of IBM's lead.^[9]InfoWorld ran the headline on the cover page of their September 15, 1986, issue: "Compaq Introduces 386 PC, Challenges IBM to Match It". In the article,Rod Canion, Compaq'sCEO, was quoted warning IBM that they had six months to respond with a 386-based machine of their own lest they lose serious market share.^[10]: 1 IBM envisioned the Model 80 as the premier machine for their forthcoming multi-userOperating System/2 (OS/2), co-developed byMicrosoft and ultimately a market failure.^[11][12]

As well as being IBM's first 386-based PC, the Model 80 was the company's second Intel-powered PC built into atower case.^[13] The case was identical to the Model 60—IBM's first Intel-based tower computer—down to the carrying handle included on top of the machine, to aid in lifting the relatively heavy computer, at roughly 40 pounds (18 kg).^[14]

The Model 80 features eight Micro Channel expansion slots: four 16-bit slots, one 16-bit slot with an extension exclusively meant for selectgraphics adapter cards, and three 32-bit slots.^[15]: 145 The Model 80 was the only entry in the initial PS/2 line-up to sport 32-bit Micro Channel slots, until the release of thePS/2 Model 70, which was essentially a compact version of the Model 80 built into thePS/2 Model 50's chassis.^{[16]: 38 [17]} Besides the expansion slots, the Model 80 features several drive bays: two accommodating 3.5-inch-width drives (one 3.5-inch floppy drive is included as stock; the 3.5-inch drive bays may also housetape drives and the like); and up to three aftermarket 5.25-inch drives (for floppy drives,optical drives, hard drive, and the like).^[18]: 96 Owing to the relatively narrow case of the Model 80, the 5.25-inch drives must be mounted on their sides, 90 degrees counterclockwise.^[19]

The original PS/2 Model 80s came in two configurations: the Model 80-041, featuring aST-506–based 44-MBhard disk drive; and the Model 80-071, featuring a faster,ESDI-based 70-MB hard disk drive.^[15]: 140 Both of these submodels ran the 386 at aclock speed of 16 MHz (equivalent to the original Deskpro 386).^[20][1] IBM planned to beat Compaq to the punch with a faster, 20-MHz version of the Model 80 in late 1987, with the Model 80-111, also featuring an ESDI-based 115-MB hard drive.^[1][21] Compaq thwarted IBM's plans again by releasing the Deskpro 386/20 in September 1987,^[22] ahead of the Model 80-111's November 1987 release date.^[21] The Model 80-111 featured a substantially redesigned system board ("planar", in IBM parlance) in order to accommodate a boost in the clock speed as well as the maximum amount ofRAM.^[18]: 94 IBM released the follow-up Model 80–311 in January 1988, featuring a 20-MHz 386 processor and a 314 MB ESDI hard drive.^[23]

In March 1990, IBM released three new submodels of the PS/2 Model 80, intended as low-costfile servers. These new submodels boosted the clock speed to 25 MHz and includedSCSI hard drives andhost adapters built-in. At the low-end of the new line-up was the Model 80-121, featuring a 120-MB hard drive and a 25-MHz 386 processor; and the Model 80-A21, with a 120-MB hard drive and a 25-MHz 386. At the high-end was the Model 80-321, which featured a 320-MB hard drive exclusive to the machine.^[24] In October 1990, the Model 80 received three final updates, in the form of the Model 80–081 with a 20-MHz 386 and an 80-MB SCSI hard drive; the Model 80–161 with a 20-MHZ 386 and a 160-MB hard drive; and the Model 80-A16 with a 25-MHz 386 and a 160-MB SCSI hard drive.^[25] After extensive price cuts to the remaining models, IBM officially discontinued the Model 80 in 1992. The company named thePS/2 Server 85, introduced that year, as its replacement.^[26][27]

The Model 80 performed mediocrely in the market at first, IBM shipping roughly 100,000 units between July 1987 and January 1988, according toGartner Dataquest. It consistently trailed behind Compaq, whose Deskpro 386 line cornered more than 70 percent of the 386 workstation market,^[28]: 1 the company selling 76,000 units of the Deskpro 386/20 submodel alone in 1987.^[22]: 36 Reasons for the Model 80's disappointing sales included its high cost, a lack of third-party 32-bit expansion cards, and skepticism over the future of Micro Channel.^[28]: 8 Dataquest projected only 160,000 unit sales of the Model 80 for 1988, compared to 650,000 for the Model 50 and 215,000 for the Model 60.^[28]: 1 After a brief wave of rejuvenated interest due to the growing market for LAN products in early 1989,^[7] the Model 80 went back to underperforming, accounting for less than 7 percent of all PS/2 sales between the middle of 1989 and the beginning of 1990. The only model of PS/2 that performed more poorly during this period was the Model 60, which was discontinued that year.^{[29]: 8 [30]}

Initial reviews of the Model 80 were cautiously optimistic.PC Tech Journal's Steven Armburst and Caroline Halliday, in a joint longform review, concluded that the release of IBM's OS/2 operating system could justify the high cost of the Model 80: "This is a machine with outstanding potential for the future that delivers top-quality performance today. When OS/2 finally arrives, it will be better able to take advantage of the power of the Model 80's 80386. Looking ahead even farther, an operating system that takes full advantage of this microprocessor could make the IBM PS/2 Model 80 an even better investment".^[15]: 152 Multiple reviewers found that the Model 80 underperformed in raw numerical performance and graphical speed compared to contemporaneous 386-powered machines, across all clock speeds.^{[31]: 61 [18]: 100 [32][33]: 36}

Although it underperformed in the marketplace, the PS/2 Model 80 (as well as the Model 60) started the trend of computer manufacturers offeringPC compatibles in optional tower form factors. By May 1988, over a dozen companies were selling desktops in a tower form factor at that year'sComdex, according toThe New York Times.^[34] By the mid-1990s, tower computers had overtaken traditional horizontal desktop cases in terms of sales.^[35]

• Computer-related introductions in 1987
• IBM PS/2

• Articles with short description
• Short description matches Wikidata