You can helpexpand this article with text translated fromthe corresponding article in Japanese. (June 2013)Click [show] for important translation instructions.
View a machine-translated version of the Japanese article.
Machine translation, likeDeepL orGoogle Translate, is a useful starting point for translations, but translators must revise errors as necessary and confirm that the translation is accurate, rather than simply copy-pasting machine-translated text into the English Wikipedia.
Consideradding a topic to this template: there are already 1,381 articles in themain category, and specifying|topic= will aid in categorization.
Do not translate text that appears unreliable or low-quality. If possible, verify the text with references provided in the foreign-language article.
Youmust providecopyright attribution in theedit summary accompanying your translation by providing aninterlanguage link to the source of your translation. A model attribution edit summary isContent in this edit is translated from the existing Japanese Wikipedia article at [[:ja:ホンダ・E型エンジン]]; see its history for attribution.
You may also add the template{{Translated|ja|ホンダ・E型エンジン}} to thetalk page.
TheE0 series is a three-cylinder gasoline engine developed and manufactured byHonda, with a total displacement of 656 cc. The engine is intended forkei car applications. The E05A and E07A were partially replaced by theHonda P engine but as of 2020 the E07Z engine still saw use in theActy truck.
The E0 is based on theHonda EH Engine, a SOHC 2-cylinder engine. Like theHonda D engine, it rotates anti-clockwise from the timing belt side. The engine was available with either a computer-controlled variableventuri-type side draft carburetor (PGM-CARB) or amulti-point fuel-injected (PGM-FI) version.
Utilizing across-flow design, the intake and exhaust valves are opened and closed by the rocker arm driven by a camshaft timing belt. The two intake and two exhaust valves are positioned on either side of the spark plug which is mounted on the top center of the combustion chamber. The cylinder block and cylinder bore are made of die-cast aluminum, as are the valve covers and oil pan.Early Japanese emissions requirements for passenger automobiles required thatexhaust gas purification be accomplished by means of a three-way catalyst. The requirement was later amended to include commercial vehicles as well.
2 belt drive mechanism of the intake and exhaust valve SOHC 2
Bore & stroke: 66.0 mm × 64.0 mm
There were three versions of fuel supply systems for this motor: Carburetor (PGM-CARB), fuel injection (PGM-FI) and MTREC (Multi Throttle Responsive Engine Control). The MTREC version of this engine has the highest power output of the various configurations.
The fuel injected version was standard fitment to the second generation Honda Today (JA4/JA5), which was only available as a passenger car version. The previous generation Today remained on sale and offered a fuel injected engine in some models (XTi, QXi). These earlier versions were tuned for more top-end power than the ones installed in the more comfort-oriented JA4 models.
In order to extract higher power from a naturally aspirated engine, Honda modified the E07A with a MTREC (Multi Throttle Responsive Engine Control) system, placing individual throttle-bodies on each of the three cylinders.
The system modified the air-fuel ratio of individual cylinders based on rpm to give sharper throttle response while also maintaining a stable idle. When fitted to the Today, the engine was tuned for somewhat less peak power in favor of more low-down torque.
TheECA1 engine was used in thefirst-generation Honda Insight, as part of the car'sIntegrated Motor Assist gasoline-electric hybrid drive system. A three-cylinder engine, it displaces 995 cc and features a SOHC 12-valve head. The engine is supplemented in various circumstances by a 10 kW permanent magnet DC electric motor adding 9.7 kW (13.0 hp; 13.2 PS) and 2.2 kg⋅m (16 lb⋅ft; 22 N⋅m) torque throughout the entire RPM range.
