 | This articleneeds additional citations forverification. Please helpimprove this article byadding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "HP-65" – news ·newspapers ·books ·scholar ·JSTOR(May 2023) (Learn how and when to remove this message) |
.jpg) HP-65 keyboard and display | |
| Type | Programmable |
|---|---|
| Introduced | 1974 |
| Calculator | |
| Entry mode | RPN key stroke |
| Display type | RedLEDseven-segment display |
| Display size | 15 digits (decimal point uses one digit), (±10±99) |
| CPU | |
| Processor | proprietary |
| Programming | |
| Programming language(s) | key codes |
| Memory register | 8 (9) plus 4-level working stack |
| Program steps | 100 |
| Other | |
| Power supply | Internal rechargeable battery or 115/230 V AC, 5 W |
| Weight | Calculator: 11 oz (310 g), recharger: 5 oz (140 g) |
| Dimensions | Length: 6.0 inches (150 mm), width: 3.2 inches (81 mm), height: 0.7–1.4 inches (18–36 mm) |
.jpg)
TheHP-65 is the first handheld programmable calculator, and it included a magnetic card read/write system for program storage. Introduced byHewlett-Packard in 1974 at anMSRP of $795[1] (equivalent to $5,069 in 2024)[2], it featured nine storage registers and room for 100 keystroke instructions. It also included a magnetic card reader/writer to save and load programs. Like all Hewlett-Packard calculators of the era and most since, the HP-65 usedreverse Polish notation (RPN) and a four-level automatic operandstack.
Bill Hewlett's design requirement was that the calculator should fit in his shirt pocket. That is one reason for the tapered depth of the calculator. The magnetic program cards are fed in at the thick end of the calculator under the LED display. The documentation for the programs in the calculator is extensive, including algorithms for hundreds of applications, including the solutions of differential equations, stock price estimation, statistics, and so forth.
The HP-65 introduced the "tall", trapezoid-shaped keys that would become iconic for many generations of HP calculators. Each of the keys had up to four functions. In addition to the "normal function" printed on the key's face, a "gold" function printed on the case above the key and a "blue" function printed on the slanted front surface of the key were accessed by pushing the goldf or blueg prefix key, respectively. For example,f followed by4 would access the sine function, org followed by4 would calculate. For some mathematical functions, a goldf−1 prefix key would access the inverse of the gold-printed functions, e.g.f−1 followed by4 would calculate the inverse sine ().
Functions included square root, inverse, trigonometric (sine, cosine, tangent and their inverses), exponentiation, logarithms and factorial. The HP-65 was one of the first calculators to include a base conversion function, although it only supported octal (base 8) conversion. It could also perform conversions between degrees/minutes/seconds (sexagesimal) and decimal degree (sexadecimal) values, as well as polar/cartesian coordinate conversion.
The HP-65 had a program memory for up to 100 instructions of six bits which included subroutine calls and conditional branching based on comparison of x and y registers. Some (but not all) commands entered as multiple keystrokes were stored in a single program memory cell. When displaying a program, the key codes were shown without line numbers.
A program could be saved tomylar-based magnetically coated cards measuring 71 mm × 9.5 mm (2.8 in × 0.4 in), which were fed through the reader by a small electric motor through a worm gear and rubber roller at a speed of 6 cm/s (2.4 in/s).[3] The recording area used only half of the width of the card. While reversing the card to store a second program was possible, it was officially discouraged (unlike in later models such as theHP-67) because the other half of the card was touched by the rubber wheel during transport, causing extra abrasion. When inserted into an extra slot between the display and the keyboard, the printing on top of the card would correspond to the top row of keys (A - E), which served as shortcuts to the corresponding program entry points.
Cards could be write-protected by diagonally clipping the top-left corner of the card. HP also sold a number of program collections for scientific and engineering applications on sets of prerecorded (and write-protected) cards.
The HP-65 had an issue/design flaw whereby storage register R9 was corrupted whenever the user (or program) executed trigonometric functions or performed comparison tests; this kind of issue was common in many early calculators, caused by a lack of memory due to cost, power, or size considerations. Since the limitation was intended from the beginning and documented in the manual, it is not, strictly speaking, abug.
During the 1975Apollo–Soyuz Test Project, the HP-65 became the first programmable handheld calculator inouter space. Two HP-65s were carried on board the Apollo spacecraft. Calculation of parameters for the several thrusting maneuvers needed to rendezvous with the Soyuz spacecraft was done on the HP-65 and compared with the results calculated by the onboardApollo Guidance Computer. Another program for the HP-65 allowed the crew to compute pointing angles for the spacecraft antenna for aiming at the ATS-6 communications relay satellite.
In the same year,Mitchell Feigenbaum, using the small HP-65 calculator he had been issued at theLos Alamos National Laboratory, discovered that the ratio of the difference between the values at which successiveperiod-doubling bifurcations occur tends to a constant of around 4.6692... This "ratio of convergence" became known as the firstFeigenbaum constant.
Steve Wozniak sold his HP scientific calculator to partly fund the first batch of Apple 1 computers.[4]
[In 1975] In order to raise the money they needed, Wozniak sold his HP 65 calculator for $500, though the buyer ended up stiffing him for half of that.