| CR.1 | |
|---|---|
 | |
| General information | |
| Type | Fighter |
| Manufacturer | Fiat |
| Designer | |
| Primary users | Regia Aeronautica |
| Number built | 240 |
| History | |
| Introduction date | 1924 |
TheFiat CR.1 was an Italianbiplanefighter aircraft of the 1920s. Of wood-and-fabric construction, it was designed by Celestino Rosatelli, from whom it gained the 'CR' designation. Its most distinctive feature was that the lower wings were longer than the upper ones.
 | This sectionneeds additional citations forverification. Please helpimprove this article byadding citations to reliable sources in this section. Unsourced material may be challenged and removed.(January 2021) (Learn how and when to remove this message) |
Regia Aeronautica requested twoprototype aircraft from Fiat in the early 1920s. The results were designated MM.1 and MM.2, identical except for therudder (one had a rounded, counterbalanced rudder) and engines (they had differing marks of Hispano-Suizapiston engines).
The aircraft was abiplane of conventional layout, with fixedtailskid landing gear and an opencockpit, with the pilot's head aligned with the trailing edge of the upper wing. TheV8 engine powered a fixed-pitch two-blade wooden propeller. The landing gear had a fixed axle between the wheels. It carried two synchronized 7.7 mm (.303 in)Vickers machine guns firing through the propeller arc.
The two prototypes were evaluated against another biplane fighter, the SIAI S.52, and proved superior in manoeuvrability and top speed. Accordingly, contracts were issued to three Italian companies for three batches of production aircraft, to be designatedCR.1:
After two preproduction prototypes were again flight tested, a total of 240 units were placed in Italian military service, beginning in 1925.[1]
| This sectiondoes notcite anysources. Please helpimprove this section byadding citations to reliable sources. Unsourced material may be challenged andremoved.(January 2021) (Learn how and when to remove this message) |
TheRegia Aeronautica ordered 240 CR.1s and began equipping its 1st FighterGroup in 1924. By 1926, 12 Italian fighter squadrons had been allocated the aircraft. In the same year, Fiat introduced an updated all-metal version, theCR.20.
Though bothBelgium andPoland evaluated and rejected the aircraft, an export order was received fromLatvia. Their nine CR.1s, fitted with the 224 kW (300 hp) Hispano-Suiza HS8N8 engine, served in Latvian Naval Aviation until 1936.
In the 1930s, some CR.1s were fitted with Isotta Fraschini Asso Caccia engines of 328 kW (440 hp), which improved their performance. These units were given to 163Squadriglia, based atRhodes in theAegean Sea. Those units were withdrawn from active service in 1937.
| This sectiondoes notcite anysources. Please helpimprove this section byadding citations to reliable sources. Unsourced material may be challenged andremoved.(January 2021) (Learn how and when to remove this message) |
Data from The Encyclopedia of Military Aircraft[2]
General characteristics
Performance
Armament
Related lists
