 | This articleneeds additional citations forverification. Please helpimprove this article byadding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Bituminous waterproofing" – news ·newspapers ·books ·scholar ·JSTOR(September 2013) (Learn how and when to remove this message) |
Bituminous waterproofing systems are designed to protect residential and commercial buildings.Bitumen (asphalt orcoal-tar pitch) is a material made up of organic liquids that are highly sticky,viscous, and waterproof.[1] Systems incorporating bituminous-based substrates are sometimes used to constructroofs, in the form of "roofingfelt" or "roll roofing" products.
Roofing felt (similar to and often confused withtar paper, but historicallymade from recycled rags rather than heavy kraft paper) has been used for decades as waterproof coverings in residential and commercial roofs as an underlay(ment) (sarking) beneath other building materials, particularly roofing and siding materials, and is one type of membrane used in asphaltbuilt up roofing (BUR) systems. Over time the felt's natural mesh used as a substrate for asphalt impregnation (derived from fabrics like cotton or burlap) has evolved into synthetic products performing the same function with improved durability. Other changes with time have enhanced performance, with roofing felt remaining a heavier and more durable product than tar paper.
The rapid application of waterproof or water-resistant roofing underlay protects the roof deck during construction until the roofing material is applied and is required for roofs required to meet Underwriters Laboratory (UL) fire ratings. The separation of the roof covering from theroof deck protects the roof covering from resins in some sheathing materials and cushions unevenness and old nails and splinters in re-roofing applications. The underlayment also sheds any water which penetrates the roof covering from an ordinary leak, a leak from wind-driven rain or snow, wind damage to the roof covering, orice dams. However, the application of underlays may increase the roof temperature, which is the leading cause of ageing ofasphalt shingles. Not installing an underlay may void the roof covering warranty.[citation needed]
Felt paper is available in several grades, the most common beingType 1—commonly called 15-pound (15#) or No. 15 (#15)—andType 2—commonly called 30-pound (30#) or No. 30 (#30). The weight designations originated with organic base felt weighing 15 or 30 pounds per 100 sq. ft. (6.8 kg or 14 kg per 9.3 m2). However, modern base felts are made of lighter-weight fibre, so the weight designations, though common colloquially, are no longer literally accurate.[2] A heavier class of materials with a similar construction but designed for civil engineering, environmental protection, and mining applications are known asBituminous Geomembranes (BGMs). BGMs are distinguished in part by larger roll widths which can exceed 5m and substantial thickness of up to 6.0mm.[3]
Another basic designation isorganic orinorganic. Organic felt paper has a base material made with formerly living materials such asrag fibre,hessian (burlap), orcellulose fibres (wood, or jute). Organic felt papers are now considered obsolete, having dwindled to just five percent of the market by 1987.[4] Inorganicbase products arepolyester,glass fibre developed in the 1950s, and historically,asbestos mat. Polyester mat is weaker and less chemically stable than fibreglass but because it is cheap is gaining market share. Polyester mat is primarily used with the more flexible modified-bitumen felt products. Asbestos mat was the first inorganic base material but was outlawed in the 1980s for health reasons but is still in use on some buildings. Inorganic felts are lighter, more tear-resistant, more fire-resistant, and do not absorb water. Another type of felt paper is perforated for use in built-up roofing and is not for use as a water-resistant underlay.
Heavier material is typically used for underlayment of longer-lived roof materials in order to match their longer life span, and on less sloped roofs, which are more susceptible to leaking. For example, two layers of No. 30 felt might be used under a slate or tile roof, whereas a single layer of No. 15 might be adequate for a steeply raked roof of 24-year asphalt shingles.[5]s0
Roofing felt is manufactured in roll format. Rolls of base felt are pulled on rollers through large tanks of bitumen mixes until they are saturated with thetar-like bitumen mixture, producing rolls of water-resistant but breathable material.
Modified bitumen is mixed with filler components such aslimestone,sand, orpolymers such as atactic polypropylene (APP) that gives rigidity and tear resistance orstyrene-butadiene styrene (SBS), a rubber additive that gives more elastic benefits.[6]
The American Society for Testing Materials (ASTM) standards that apply to felt paper are:
The Canadian Standards Association standards are:
Roll roofing is a bitumen product similar toasphalt shingles meant for direct exposure to the weather. To protect its asphaltic base from ultraviolet degradationmineral granules are added on top of the felt, also decreasing the product's fire vulnerability. Thin, removabletransparent film is added to the base of rolled roofing during manufacturing on all torch-on products. This stops the felt from sticking to the mineral layer when rolled up during the packaging process. A similar removable membrane on self-adhesive rolled roofing separates the adhesive from the mineral layer. Torch-on roofing felt also receives a removable membrane to keep it from sticking to itself prior to application.
The complex chemical composition of bitumen makes it difficult to identify the specific component(s) responsible for adverse health effects observed in exposed workers. Known carcinogens have been found in bitumen fumes generated at work sites. Observations of acute irritation in workers from airborne and dermal exposures to fumes and aerosols and the potential for chronic health effects, including cancer, warrant continued diligence in the control of exposures.
From 1905 to 1988, The Paraffine Paint Co. of San Francisco had Malthoid as a trademark for waterproof and weatherproof building and roofing materials made of paper and felt in whole or in part.[13] However, it had become well known before that.[14] About 1913, Paraffine promoted its Malthoid roofing materials with a 16-page booklet.[15] In 1941, the Duroid Company began making Malthoid inOnehunga,New Zealand.[16]
Malthoid was once common enough to be used as ageneric description of flat roofing material inNew Zealand andSouth Africa (item 26). A description of a New Zealand house built about 1914 says it was, "built of timber framework. covered by sheets of asbestos. The roof was closely timbered, then covered by strips of Malthoid paper. This was then painted with tar and topped off with a sprinkling of sand."[17] Railway vehicles in Australia were roofed with Malthoid.[18] Malthoid is still available for flat roofs and damp courses.[19]
{{cite web}}: CS1 maint: archived copy as title (link) accessed 3/11/2014{{cite journal}}:Cite journal requires|journal= (help){{cite journal}}:Cite journal requires|journal= (help){{cite journal}}:Cite journal requires|journal= (help){{cite journal}}:Cite journal requires|journal= (help){{cite journal}}:Cite journal requires|journal= (help)
Media related toFelt and tar paper at Wikimedia Commons