| Expedition Everest – Legend of the Forbidden Mountain | |
|---|---|
 | |
.jpg) Expedition Everest | |
| Disney's Animal Kingdom | |
| Location | Disney's Animal Kingdom |
| Park section | Asia |
| Coordinates | 28°21′30″N81°35′11″W / 28.3582°N 81.5863°W /28.3582; -81.5863 |
| Status | Operating |
| Soft opening date | January 26, 2006[1] |
| Opening date | April 7, 2006 (2006-04-07) |
| Cost | US $100,000,000 |
| General statistics | |
| Manufacturer | Vekoma |
| Designer | Walt Disney Imagineering |
| Model | Custom |
| Track layout | Custom |
| Lift/launch system | Chainlift hill |
| Height | 112 ft (34 m) |
| Drop | 80 ft (24 m) |
| Length | 3,884.5 ft (1,184.0 m) |
| Speed | 50 mph (80 km/h) |
| Inversions | 0 |
| Duration | 2:50 |
| Capacity | 2,050 riders per hour |
| G-force | 3.0 |
| Height restriction | 44 in (112 cm) |
| Trains | 6 (max. 5 in operation) trains with 6 cars. Riders are arranged 2 across in 3 rows with the exception of the last car which has only 2 rows for a total of 34 riders per train. |
| Restraints | Individual Lap-bars |
| Audio-animatronics | Yes (Non-functional) |
 Lightning Lane available | |
 Single rider line available | |
 Must transfer from wheelchair | |
| Expedition Everest – Legend of the Forbidden Mountain at RCDB | |
Expedition Everest – Legend of the Forbidden Mountain, also known asExpedition Everest, is asteelroller coaster built byVekoma atDisney's Animal Kingdom at theWalt Disney World Resort inLake Buena Vista, Florida. The ride is themed around theYeti protecting the Forbidden Mountain next toMount Everest. It is the only roller coaster at Disney's Animal Kingdom, and the tallest roller coaster at any Disney theme park.
The 2011 edition ofGuinness World Records lists Expedition Everest as the most expensive roller coaster in the world,[2] a record the ride held until 2019 whenHagrid's Magical Creatures Motorbike Adventure atUniversal Islands of Adventure opened.[3] Including sets and extras, its total cost was reported to be US$ 100 million for six years of planning and construction.[2][4] It is the tallest artificial mountain in all of the Walt Disney parks, and Disney's 18th mountain-themed attraction.[5] It is also the most recently opened attraction at Walt Disney World not based on pre-existingintellectual property.[6][7]
The attraction was announced publicly on April 22, 2003, during an event to celebrate the fifth anniversary ofDisney's Animal Kingdom.[8] Construction of the new attraction began a month before the announcement in March 2003.[9] It took three years and required more than 38 miles (61 km) ofrebar; 5,000 tons of structural steel; and 10,000 tons of concrete.[10] Expedition Everest opened for previews on January 26, 2006,[1] and had its grand opening on April 7, 2006,[11] in ceremonies led by Disney CEOBob Iger and theme parks chairmanJay Rasulo.[1][11] At 199.5 feet (60.8 m), it is the tallest attraction atWalt Disney World, beatingThe Twilight Zone Tower of Terror atDisney's Hollywood Studios by 6 inches (15 cm). Disney keeps all of its attraction buildings under 200 feet (61 m) because aviation laws require structures of that height and taller to have a blinking red light beacon for low-flying aircraft, which would take away from the theming of their attraction.
The attraction features a stand-by, Lightning Lane, and a single-rider line.[1] The queue starts at the office of the fictional "Himalayan Escapes" travel agency, progressing to a replica temple with little holy figures. Visitors next enter a tea garden, followed by a room with equipment from a successful expedition, and then the "Yeti Museum", which contains information on the Yeti and a moulding of a Yeti footprint.[12] There are also about 8,000 artifacts brought from theNepal trip in the museum.[13][14] The single-rider line skips all of the exhibits.
The riders board the roller coaster in the model village of Serka Zong, to begin a speedy route through theHimalayas to the base ofMount Everest.[5][12]
Thetrain blows its whistle and departs thestation to the right and climbs a small lift leading to a short drop, then circles around to the 112-foot (34 m)lift hill, carrying the riders into the mountain. On the way up, it passes through a ransacked temple with murals of the yeti, warning the riders that the mountain is its territory. A noise can also be heard during this lift hill, foreshadowing the yeti. At the top of the mountain, the train curves around the main peak and goes through a cave. When it emerges from the other side, the train quickly stops at the top of a hill blocked off by a shredded track. Large footprints are seen in the snow, followed by a loud roar presuming the Yeti tore up the track. To the left of the broken tracks is a secret bird animatronic, abearded vulture, sitting on a stick.[15] The train itself is held in place by a series of rubber tires while an automatic switch rotates the piece of track directly behind the train. The train then rolls backwards along a new route that spirals down through the mountain by track switches. It eventually comes to a stop in a large cave, where riders see the yeti's shadow on the wall as it tears up more track. This effect distracts riders from noticing another automatic track switch in front of them. As the shadow moves away, the train rolls forward out of the mountain, going past theon-ride camera and plunging down the main 80-foot (24 m) drop. It enters a 250° turn and speeds back up through another cave in the mountain, where the roars of the yeti are heard once more. The train exits from the rear of the mountain and enters a large helix before being lifted back into the mountain a final time. The train drops through a cave, where an audio animatronic of the yeti is reaching down toward it. On reaching the bottom of this drop, riders return to the unloading dock and depart into a gift shop. The ride lasts 2 minutes and 50 seconds.[12][16][17][18]
Expedition Everest has six steam-like trains, each with six cars. Each train has 17 rows seating two abreast, for a total of 34 riders per train. The trains are themed as the "Anandapur Rail Service" and are made to look old and rusty.[5][12] Riders must be at least 44 inches (110 cm) tall and are secured by a lap bar.[5][18] The "locomotive" itself is designed to resemble avertical boiler configuration and is placed at the rear of the train rather than the front, so not to obstruct the riders' view. Up to five trains usually operate at once, but fewer can be used if guest demand is low.[1] To create the illusion of a "steam powered" train, engineers placed vents under the station. When a train comes into the station, steam comes up through the vents and enters the loading platform.[10]
The steel track is 3,884.5 feet (1,184.0 m) long and the lift is about 112 feet (34 m) high. Expedition Everest uses a track system by Dutch manufacturerVekoma, where the rails are mounted on the outer surface of the ties, rather than on the inner surface. This was the first large-scale installation of such a system.[17]
Although moderate in height and length by contemporary standards, Expedition Everest was the first ride for Disney to have its trains travel both forward and backward. This is accomplished through two sets of track switches, one before the rear segment and one after. This was the second Disney roller coaster to run backwards, the first beingIndiana Jones et le Temple du Péril: Backwards! atDisneyland Resort Paris (2000–2004).[19] Expedition Everest, however, was the first Disney roller coaster to switch between forward and backward sections during the same ride.[20]
The mountain façade, the Yetiaudio-animatronic, and the roller coaster are three independent structures. Each structure reaches the ground-level and does not touch the other two structures. This was achieved via a4-D scheduling software that provided the exact details on how to construct it.[21]
Expedition Everest is often compared to the 1959Matterhorn Bobsleds roller coaster atDisneyland, which also features a snowy mountain setting and an "abominable snowman" figure throughout the ride.[22] Expedition Everest's mountain is made from 1,800 tons of steel and painted with 2,000 gallons of paint.[5][18] At 199.5 feet (60.8 meters), to avoid the Floridian legal requirement to place a light atop structures 200 feet or taller to alert planes), it is the tallest artificial mountain in the world, but not, as occasionally cited, the tallest point in Florida.[10] It was the 18th mountain-themed attraction built on Disney property.[5]
The artificial mountain is not a model of Mount Everest, but rather of the fictional "forbidden mountain" guarded by the yeti in the story created for the attraction byWalt Disney Imagineering. Everest is represented by the barren background peak on the far right, which is made to seem far in the distance (an example offorced perspective).[18] Moreover, there is a small shrine on the ground level in the Asia area of the park which has been designed to perfectly overlap with the view of the distant attraction.
The yeti was the largest and most complexaudio-animatronic figure ever built byWalt Disney Imagineering at the time of its construction.[10][12] It is 25 feet (7.6 m) tall.[10] Its "skin" measures 1,000 square feet (93 m2), and is held in place by 1,000 snaps and 250 zippers.[10] Its movement is controlled by 19actuators when functioning in "A-mode", its full mode of operation. In "A-mode," it can move 5 ft (1.5 m) horizontally and 18 in (46 cm) vertically.[23]
A few months after the ride opened in 2006, the yeti figure's framing split, threatening catastrophic malfunction if it were to be operated further in "A-mode".[23] Since then it has been operated only in the alternative "B-mode", in which a strobe-light effect is used to give the appearance of movement, earning it the nickname "Disco Yeti" from some fans.[24] For years it was speculated that the problem was caused by damage to the yeti's concrete base structure, which is unlikely to be repaired until a major refurbishment in the distant future, because the design limits access to the yeti without major disassembly of the superstructure.[23] The problem with the concrete is rumored to have occurred due to a glitch in the 4-D scheduling software that prevented adequate curing of a portion of the Yeti's foundation before the fabrication of mountain elements and roller coaster track. The prevailing theory is that the damage is to the animatronic itself, and not to the concrete base structure.[25]
Joe Rohde, theImagineer in charge of building the attraction and Animal Kingdom, was asked about the yeti at the 2013D23 Expo. Rohde responded, "You have to understand, it's a giant complicated machine sitting on top of, like, a 46-foot tall tower in the middle of a finished building. So, it's really hard to fix, but we are working on it. And we continue to work on it. We have tried several 'things', none of them quite get to the key, turning of the 40-foot tower inside of a finished building, but we are working on it... I will fix the Yeti someday, I swear."[26][27] Rohde retired from Walt Disney Imagineering effective January 4, 2021, never having completed the repairs to the Yeti animatronic.[28]
In 2005,Disney,Discovery Networks (nowWarner Bros. Discovery), andConservation International conducted expeditions to Nepal as part of the promotion for Expedition Everest. The purpose was to conduct scientific and cultural research in remote areas of the Himalayas, the location of the yeti legend. Participants includedJoe Rohde from Walt Disney Imagineering and scientists from Conservation International and Disney's Animal Kingdom.[14]
The expeditions and the making of the attraction were chronicled in three documentaries broadcast on Discovery's cable television channels in April 2006.[11] The first wasExpedition Everest: Journey to Sacred Lands, broadcast on theTravel Channel on April 9 to coincide with the attraction's grand opening.[11] The second,Building A Thrill Ride: Expedition Everest, was aired on April 10[11] on theScience Channel and on April 12 on theDiscovery Channel.[29] It detailed the planning and construction of the ride, along with some of the ideas that made it possible. (During construction, for example, instead of traditional scaffolding the Imagineers used interior poles that poked through the outside of the mountain and were connected by wooden platforms.)[10] This documentary also featured survival tips fromLes Stroud. The third,Corwin's Quest: Realm of the Yeti, was broadcast onAnimal Planet in April and featured American animal and nature conservationistJeff Corwin.[11]
On February 15, 2006, Disney staged an elaborate publicity stunt called "Everest in the City" in New York City'sTimes Square. They draped large billboards over the sides of several buildings, depicting Everest with a coaster car careening down the mountainside and the yeti looking on from another peak, its eyes glowing red and flashing when the text message "Disney” was sent to “4Yeti” as provided by Disney.[30]
The 2011 book ofGuinness World Records lists Expedition Everest as the most expensive roller coaster in the world. Including sets and extras, the total cost of the ride was reported to beUS$100 million over six years of planning and construction.[4] In 2019, this record was surpassed byHagrid's Magical Creatures Motorbike Adventure atThe Wizarding World of Harry Potter, which cost US$300 million.[3]
Expedition Everest won the 2006 Theme Park Insider Award for the "World's Best New Theme Park Attraction".[34] It has also been ranked in theGolden Ticket Awards and the Best Roller Coaster Poll. It was ranked second for "Best New Ride For 2006" in the Golden Ticket Awards.[35]
| Year | 1998 | 1999 | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Ranking | – | – | ||||||||
| Year | 2000 | 2001 | 2002 | 2003 | 2004 | 2005 | 2006 | 2007 | 2008 | 2009 |
| Ranking | – | – | – | – | – | – | – | 32 (tied)[36] | 35[37] | 36[38] |
| Year | 2010 | 2011 | 2012 | 2013 | 2014 | 2015 | 2016 | 2017 | 2018 | 2019 |
| Ranking | 36[39] | 47[40] | – | 42 (tied)[41] | – | 47[42] | 49 (tied)[43] | 49[44] | 46[45] | – |
| Year | 2020 | 2021 | 2022 | 2023 | 2024 | 2025 | ||||
| Ranking | N/A | – | – | – | – | – |
{{cite book}}: CS1 maint: multiple names: authors list (link)
| The Oasis |  | |
|---|---|---|
| Discovery Island | ||
| Pandora – The World ofAvatar | ||
| Africa | ||
| Rafiki's Planet Watch | ||
| Asia | ||
| DinoLand U.S.A. | ||
| Future |
| |
