Anepilator is an electrical device used to remove hair by mechanically grasping multiple hairs simultaneously and pulling them out. The way in which epilators pull out hair is similar towaxing, but unlike waxing, they do not remove skin cells. Epilators may use anelectric motor or be manually powered with aspring. They may also come with various attachments, like a smaller head to help with epilation of hard-to-reach areas, or an exfoliation head that may help exfoliate theskin before and after epilation.
Epilation can be painful to some people because, as with waxing, it involves pulling hair out of the roots. Because the first epilation of an area is often especially painful, some people prefer to have the area professionally waxed first, then use epilation to remove regrowth. The most recommended way to undergo painless epilation is by showering the area in hot water for 15–20 minutes beforehand.[1] Pain from epilation is sometimes mitigated by reducing the speed of the device, relaxing the skin with ahot shower or bath, or using anumbing cream on the skin before epilation.
The first type of epilator was the originalEpilady released inIsrael, and manufactured by Mepro inkibbutzHaGoshrim in 1986.[2] The design incorporated acoil spring, which was bowed into a curve such that the coils on one side of the spring were squeezed tightly together while on the other side the coils were spread apart. The motor in the Epilady rotated the spring, causing it to flex as it rotated. Moving the rotating spring across the skin caused the hairs to be caught up in the spring and pulled out through hair follicles.[3]
Because the springs flexed continuously, they were subject to occasional failure and were sold separately as a replacement part.[citation needed]
Today, there are manual epilators designed for the face that do not use a power supply. This design consists simply of acoil spring with two handles. The spring is then bowed into acurve and placed upon the unwanted facial hair whilst turning the handles. This caused the hairs to be caught between the coils of the springs and pulled out from the roots.[citation needed]
TheRemingtonLady Remington Smooth and Silky was designed to operate in a similar way to the spring type Epilady, except that a series of metal discs were used instead of a spring. It was the subject of extensive patent litigation inEurope due to a conceptual similarity to the spring type epilator.[4] TheUK patent infringement case is known asImprover Corporation v Remington Consumer Product Limited [1990] F.S.R. 181.
The rotating disc design has been refined such that, in modern designs, the plates are no longer complete discs. Thehead of a modern epilator incorporates a series of metal plates mounted in a plastic housing. The ends of the plates may be exposed at one or both sides of the housing. As the head rotates, the tips of the plates move together and apart once per revolution. This creates a tweezing effect, where the hair between the plates, when they close, is pulled as the plates rotate away from the skin, then released as the plates separate. This allows a continuous cycle of gripping, pulling, extracting and discarding the hair as the epilator is moved across the skin.
Depending upon the strength and brittleness of the hair, some may snap off rather than being pulled out. Because those hairs snap off just above the skin surface, they can look somewhat like stubble fromshaving, but are far more sparsely spread because the other hairs have been pulled out entirely. As with waxing, because of the phases of growth that occur with hair, there is not as much regrowth following the first epilation. Regular epilation of regrowth is less painful than the initial epilation and the number of broken off hairs diminishes with regular epilation.
Many modern epilators have a built in rechargeable battery and are designed to be used either wet or dry. These types of devices are built to be used in or out of the shower or with an optional cream orgel. The use of askin cream orgel is said to be helpful with reducing the pain and irritation associated with the dry use only devices.[5]
| Method | Duration of Results | Pain Level | Cost | Pros | Cons |
|---|---|---|---|---|---|
| Epilators | 3–6 weeks | Moderate to high | Moderate | Long-lasting, portable, cost-effective | Initial pain, learning curve |
| Trimming | Immediate (cuts hair short) | None | Low to moderate | Quick, no skin irritation, good for shaping | Does not remove hair, only trims it |
| Shaving | 1–3 days | None | Low | Quick, usually painless, basic razors are very cheap | Frequent regrowth, risk of cuts and skin irritation (razor burn) |
| Depilatory creams | 1–2 weeks | None | Low | Usually painless, easy to use | Skin irritation, chemical smell, cannot be used in sensitive areas, can cause chemical burns if used incorrectly |
| Waxing | 3–6 weeks | Moderate to high | Moderate | Long-lasting, removes skin cells | Can be messy, painful |
| Laser hair removal | Semi-permanent | Low to moderate | High | Long-term results | Expensive, requires multiple sessions |
| Electrolysis | Permanent | Moderate to high | Very high | Permanent results, works on all hair colors | Painful, time-consuming, expensive |