![]() | It has been suggested thatAristonectidae andAristonectinae bemerged into this article. (Discuss) Proposed since January 2025. |
Elasmosauridae | |
---|---|
![]() | |
Reconstructed skeleton ofElasmosaurus platyurus in theRocky Mountain Dinosaur Resource Center in Woodland Park, Colorado. | |
Scientific classification![]() | |
Domain: | Eukaryota |
Kingdom: | Animalia |
Phylum: | Chordata |
Class: | Reptilia |
Superorder: | †Sauropterygia |
Order: | †Plesiosauria |
Clade: | †Xenopsaria |
Family: | †Elasmosauridae Cope, 1869 |
Genera | |
List
| |
Synonyms | |
|
Elasmosauridae, often calledelasmosaurs orelasmosaurids, is an extinctfamily ofplesiosaurs that lived from theHauterivianstage of theEarly Cretaceous to theMaastrichtian stage of theLate Cretaceousperiod (c. 130 to 66mya). Thetaxon was initially erected in 1869 byEdward Drinker Cope to include thetype genusElasmosaurus with the relatedCimoliasaurus, although he did not argued in detail why. Over the following years, many authors recognized this classification on the basis of predominantly postcranial features, becoming one of the three groups in which plesiosaurs were often classified during the 19th century, along with thePliosauridae and thePlesiosauridae. However, most of these traits led to many genera since recognized as belonging to other plesiosaur families being classified as elasmosaurids. Another family historically considered as distinct, the Cimoliasauridae, has since 2009 been recognized as ajunior synonym of the Elasmosauridae. Along with thePolycotylidae, elasmosaurids represent the fewplesiosauroids that lived until theCretaceous–Paleogene extinction event.
With a maximum length ranging from 5 to 12 m (16 to 39 ft) depending on the genera, elasmosaurids have a streamlined body with paddle-like limbs, mostly having a short tail, a small head, and an extremely long neck. The necks of these marine reptiles are supported by a very large number ofcervical vertebrae,Elasmosaurus andAlbertonectes being the only knownvertebrates to have more than 70. The skull of elasmosaurids appears mainly slender and triangular, the majority of them having large fang-like teeth at the front, and smaller teeth towards the back. The Aristonectinae subgroup nevertheless has different morphological traits, having more numerous but smaller teeth and having a shorter neck. Elasmosaurids were well adapted for aquatic life, and used their flippers for swimming. Contrary to earlier depictions, their necks were not very flexible, and could not be held high above the water surface. It is unknown what their long necks were used for, but they may have had a function in feeding. Elasmosaurids probably ate small fish and marineinvertebrates, seizing them with their long teeth, and may have usedgastroliths (stomach stones) to help digest their food.
Like many plesiosaurs, elasmosaurids are easily recognizable by their compact, streamlined bodies, long paddle-like limbs, short tails, proportionately small heads, and very elongated necks.[2] The oldest known representative,Jucha, dating from theHauterivianstage of theLower Cretaceous,[1] would have measured 5 m (16 ft) long.[6] Most representatives dating from more recent periods nevertheless adopt sizes ranging from more than 8 m (26 ft) in length.[7] The largest known member of this family,Albertonectes, would have reached a length of 12.1 metres (40 ft) with abody mass of 4.8 metric tons (5.3 short tons).[8] A referred specimen ofAristonectes that was discovered inSeymour Island,Antarctica, numbered as MLP 89-III-3-1, is view to be one of thelargest and heaviest plesiosaurs identified to date, estimated in 2019 at between 11 and 11.9 metres (36 and 39 ft) long for body mass of 10.7–13.5 metric tons (11.8–14.9 short tons).[9][a]
The skull of elasmosaurids are mainly slender and triangular in shape. The lateral edges of theorbits are characterized by a convex lateral edge. A large majority of representatives of the group have a their generallyheterodont (irregular throughout the jaws) dentition, with the teeth becoming progressively smaller from front to back, with the larger ones shaped like large fangs. These representatives have generally five teeth in thepremaxillae (which form the front of the upper jaw), 14 teeth in themaxillae (the largest tooth bearing bone of the upper jaw), and between 17 and 19 in thedentary bones (the main part of the lower jaw). Aristonectines teeth are more numerous but are considerably smaller, having ahomodont dentition, all the teeth being similar in shape.[2]
One of the most easily recognizable characteristics of elasmosaurids is their long neck formed by a fairly considerable number ofcervical vertebrae, of which a large majority of genera have between 50 and 70. Thetype genusElasmosaurus and its close relativeAlbertonectes are the only representatives currently known to have more than 70, precisely 72 and 76 respectively, an unequaled number among all knownvertebrates.[10][11] In spite of their many neck vertebrae, the necks of elasmosaurids were less than half as long as those of the longest-neckedsauropoddinosaurs.[12] Additionally, the Aristonectinae subgroup has cervical vertebrae that are wider than they are long, and their necks are therefore shorter than those of other representatives. Apart from aristonectines, other elasmosaurids have a longitudinal ridge on the cervical vertebrae which served to anchor the neck musculature. One of the identifying features of elasmosaurids is that their shoulder girdle has a large heart-shaped opening located between thecoracoids, known as the intercoracoid embayment. As with other plesiosaurs, they have swimming paddles made up of very longdigits. The paddles at the front (the pectoral paddles) were longer than those at the back (the pelvic paddles). Since the last tail-vertebrae of elasmosaurids were fused into a structure similar to thepygostyle of birds, it is possible this supported a tail-fin, but the shape it would have had is unknown.[2]
ThoughEdward Drinker Cope had originally recognizedElasmosaurus as a plesiosaur, in an 1869 paper he placed it, withCimoliasaurus andCrymocetus, in a new order ofsauropterygian reptiles. He named the group Streptosauria, or "reversed lizards", due to the orientation of their individual vertebrae supposedly being reversed compared to what is seen in other vertebrate animals.[13][14] He subsequently abandoned this idea in his 1869 description ofElasmosaurus, where he stated he had based it on Leidy's erroneous interpretation ofCimoliasaurus. In this paper, he also named the new family Elasmosauridae, containingElasmosaurus andCimoliasaurus, without comment. Within this family, he considered the former to be distinguished by a longer neck with compressed vertebrae, and the latter by a shorter neck with square, depressed vertebrae.[15]: 47
In subsequent years, Elasmosauridae came to be one of three groups in which plesiosaurs were classified, the others being thePliosauridae andPlesiosauridae (sometimes merged into one group).[16] In 1874Harry Seeley took issue with Cope's identification ofclavicles in the shoulder girdle ofElasmosaurus, asserting that the supposed clavicles were actually scapulae. He found no evidence of a clavicle or aninterclavicle in the shoulder girdle ofElasmosaurus; he noted that the absence of the latter bone was also seen in a number of other plesiosaur specimens, which he named as new elasmosaurid genera:Eretmosaurus,Colymbosaurus, andMuraenosaurus.[17]Richard Lydekker subsequently proposed thatElasmosaurus,Polycotylus,Colymbosaurus, andMuraenosaurus could not be distinguished fromCimoliasaurus based on their shoulder girdles, and advocated their synonymization at the genus level.[18][19]
Seeley noted in 1892 that the clavicle was fused to the coracoid by a suture in elasmosaurians, and was apparently "an inseparable part" of the scapula. Meanwhile, all plesiosaurs with two-headed neck ribs (the Plesiosauridae and Pliosauridae) had a clavicle made only ofcartilage, such thatossification of the clavicle would turn a "plesiosaurian" into an "elasmosaurian".[20]Samuel Wendell Williston doubted Seeley's usage of neck ribs to subdivide plesiosaurs in 1907, opining that double-headed neck ribs were instead a "primitive character confined to the early forms".[21]Charles Andrews elaborated on differences between elasmosaurids and pliosaurids in 1910 and 1913. He characterized elasmosaurids by their long necks and small heads, as well as by their rigid and well-developed scapulae (but atrophied or absent clavicles and interclavicles) for forelimb-driven locomotion. Meanwhile, pliosaurids had short necks but large heads, and used hindlimb-driven locomotion.[22][23]
Although the placement ofElasmosaurus in the Elasmosauridae remained uncontroversial, opinions on the relationships of the family became variable over subsequent decades. Williston created a revised taxonomy of plesiosaurs in amonograph on theosteology of reptiles (published posthumously in 1925). He provided a reviseddiagnosis of the Elasmosauridae; aside from the small head and long neck, he characterized elasmosaurids by their single-headed ribs; scapulae that meet at the midline; clavicles that are not separated by a gap; coracoids that are "broadly separated" in their rear half; short ischia; and the presence of only two bones (the typical condition) in the epipodialia (the "forearms" and "shins" of the flippers). He also removed several plesiosaurs previously considered to be elasmosaurids from this family due to their shorter necks and continuously meeting coracoids; these includedPolycotylus andTrinacromerum (thePolycotylidae), as well asMuraenosaurus,Cryptoclidus,Picrocleidus,Tricleidus, and others (theCryptoclididae).[24]
In 1940Theodore White published a hypothesis on the interrelationships between different plesiosaurian families. He considered Elasmosauridae to be closest to the Pliosauridae, noting their relatively narrow coracoids as well as their lack of interclavicles or clavicles. His diagnosis of the Elasmosauridae also noted the moderate length of the skull (i.e., a mesocephalic skull); the neck ribs having one or two heads; the scapula and coracoid contacting at the midline; the blunted rear outer angle of the coracoid; and the pair of openings (fenestrae) in the scapula–coracoid complex being separated by a narrower bar of bone compared to pliosaurids. The cited variability in the number of heads on the neck ribs arises from his inclusion ofSimolestes to the Elasmosauridae, since the characteristics of "both the skull and shoulder girdle compare more favorably withElasmosaurus than withPliosaurus orPeloneustes." He consideredSimolestes a possible ancestor ofElasmosaurus.[25]Oskar Kuhn adopted a similar classification in 1961.[26]: 4
Samuel Paul Welles took issue with White's classification in his 1943 revision of plesiosaurs, noting that White's characteristics are influenced by both preservation andontogeny. He divided plesiosaurs into two superfamilies, thePlesiosauroidea andPliosauroidea, based on neck length, head size, ischium length, and the slenderness of the humerus and femur (the propodialia). Each superfamily was further subdivided by the number of heads on the ribs, and the proportions of the epipodialia. Thus, elasmosaurids had long necks, small heads, short ischia, stocky propodialia, single-headed ribs, and short epipodialia.[27] Pierre de Saint-Seine in 1955 andAlfred Romer in 1956 both adopted Welles' classification.[26]: 4 In 1962 Welles further subdivided elasmosaurids based on whether they possessed pelvic bars formed from the fusion of the ischia, withElasmosaurus andBrancasaurus being united in the subfamily Elasmosaurinae by their sharing of completely closed pelvic bars.[28]: 4
Per Ove Persson, however, considered Welles' classification too simplistic, noting in 1963 that it would, in his opinion, erroneously assignCryptoclidus,Muraenosaurus,Picrocleidus, andTricleidus to the Elasmosauridae. Persson refined the Elasmosauridae to include traits such as the crests on the sides of the neck vertebrae; the hatchet-shaped neck ribs at the front of the neck; the fused clavicles; the separation of the coracoids at the rear; and the rounded, plate-like pubis. He also retained the Cimoliasauridae as separate from the Elasmosauridae, and suggested, based on comparisons of vertebral lengths, that they diverged from the Plesiosauridae in the Late Jurassic or Early Cretaceous.[26]: 7 However, David S. Brown noted in 1981 that the variability of neck length in plesiosaurs made Persson's argument unfeasible, and moved the aforementioned genera back into the Elasmosauridae; he similarly criticized Welles' subdivision of elasmosaurids based on the pelvic bar. Brown's diagnosis of elasmosaurids included the presence of five premaxillary teeth; the ornamentation of teeth by longitudinal ridges; the presence of grooves surrounding theoccipital condyles; and the broad-bodied scapulae meeting at the midline.[29]: 336 In 2009, F. Robin O'Keefe and Hallie Street synonymized the Cimoliasauridae with the Elasmosauridae, noting that most of the diagnostic traits previously established to distinguish them are also found in elasmosaurids.[30]
Carpenter's 1997 phylogenetic analysis of plesiosaurs challenged the traditional subdivision of plesiosaurs based on neck length. He found thatLibonectes andDolichorhynchops shared characteristics such as an opening on the palate for thevomeronasal organ, the plate-like expansions of thepterygoid bones, and the loss of thepineal foramen on the top of the skull, differing from the pliosaurs. While polycotylids had previously been part of the Pliosauroidea, Carpenter moved polycotylids to become thesister group of the elasmosaurids based on these similarities, thus implying that polycotylids and pliosauroids evolved their short necks independently.[31]
F. Robin O'Keefe likewise included polycotylids in the Plesiosauroidea in 2001 and 2004, but considered them more closely related to the Cimoliasauridae and Cryptoclididae in theCryptocleidoidea.[16][32][33] Some analyses continued to recover the traditional groupings. In 2008 Patrick Druckenmiller and Anthony Russell moved the Polycotylidae back into the Pliosauroidea, and placedLeptocleidus as their sister group in the newly namedLeptocleidoidea;[34] Adam Smith and Gareth Dyke independently found the same result in the same year.[35] However, in 2010 Hilary Ketchum and Roger Benson concluded that the results of these analyses were influenced by inadequate sampling of species. In the most comprehensive phylogeny of plesiosaurs yet, they moved the Leptocleidoidea (renamed the Leptocleidia) back into the Plesiosauroidea as the sister group of the Elasmosauridae;[36] subsequent analyses by Benson and Druckenmiller recovered similar results, and named the Leptocleidoidea–Elasmosauridae grouping asXenopsaria.[37][38]
The content of Elasmosauridae also received greater scrutiny. Since its initial assignment to the Elasmosauridae, the relationships ofBrancasaurus had been considered well supported, and it was recovered by O'Keefe's 2004 analysis[32] and Franziska Großmann's 2007 analysis.[39] However, Ketchum and Benson's analysis instead included it in the Leptocleidia,[36] and its inclusion in that group has remained consistent in subsequent analyses.[37][38][40] Their analysis also movedMuraenosaurus to the Cryptoclididae, andMicrocleidus andOccitanosaurus to the Plesiosauridae;[36] Benson and Druckenmiller isolated the latter two in the groupMicrocleididae in 2014, and consideredOccitanosaurus a species ofMicrocleidus.[38] These genera had all previously been considered to be elasmosaurids by Carpenter, Großmann, and other researchers.[41][39][42][43]
Within the Elasmosauridae,Elasmosaurus itself has been considered a "wildcard taxon" with highly variable relationships.[44] Carpenter's 1999 analysis suggested thatElasmosaurus was morebasal (i.e. less specialized) than other elasmosaurids with the exception ofLibonectes.[41] In 2005 Sachs suggested thatElasmosaurus was closely related toStyxosaurus,[45] and in 2008 Druckenmiller and Russell placed it as part of apolytomy with two groups, one containingLibonectes andTerminonatator, the other containingCallawayasaurus andHydrotherosaurus.[34] Ketchum and Benson's 2010 analysis includedElasmosaurus in the former group.[36] Benson and Druckenmiller's 2013 analysis (below, left) further removedTerminonatator from this group and placed it as one step morederived (i.e., more specialized).[37] In Rodrigo Otero's 2016 analysis based on a modification of the same dataset (below, right),Elamosaurus was the closest relative ofAlbertonectes, forming theStyxosaurinae withStyxosaurus andTerminonatator.[40] Danielle Serratos, Druckenmiller, and Benson could not resolve the position ofElasmosaurus in 2017, but they noted that Styxosaurinae would be asynonym of Elasmosaurinae ifElasmosaurus did fall within the group.[44] In 2020, O'Gorman formally synonymized Styxosaurinae with Elasmosaurinae based on the inclusion ofElasmosaurus within the group, and also provided a list of diagnostic characteristics for the clade.[3] In 2021 a new topology placedCardiocorax as a sister taxon ofLibonectes, representing an older lineage of elasmosaurids in the Maastrichtian.[46]
Topology A: Bensonet al. (2013)[37] | Topology B: Otero (2016),[40] with clade names following O'Gorman (2020)[3]
|
Elasmosaurids were fully adapted to life in the ocean, with streamlined bodies and long paddles that indicate they were active swimmers.[2] The unusual body structure of elasmosaurids would have limited the speed at which they could swim, and their paddles may have moved in a manner similar to the movement of oars rowing, and due to this, could not twist and were thus held rigidly.[47] Plesiosaurs were even believed to have been able to maintain a constant and high body temperature (homeothermy), allowing for sustained swimming.[48]
A 2015 study concluded that locomotion was mostly done by the fore-flippers while the hind-flippers functioned in maneuverability and stability;[49] a 2017 study concluded that the hind-flippers of plesiosaurs produced 60% more thrust and had 40% more efficiency when moving in harmony with the fore-flippers.[50] The paddles of plesiosaurs were so rigid and specialized for swimming that they could not have come on land to lay eggs likesea turtles. Therefore, they probably gave live-birth (viviparity) to their young like some species ofsea snakes.[47] Evidence for live-birth in plesiosaurs is provided by the fossil of an adultPolycotylus with a single fetus inside.[51]
Elasmosaurid remains provide some evidence they were preyed upon. A humerus of an unidentified subadult elasmosaurid was found with bite marks matching the teeth of the sharkCretoxyrhina,[52] while a crushedEromangasaurus skull[53] has tooth-marks matched to the pliosaurKronosaurus.[54]
Although followed by many common media depictions, more recent research showed that elasmosaurids were incapable of raising anything more than its head above the water. The weight of their long neck placed the center of gravity behind the front flippers. Thus, elasmosaurids could have raised their head and neck above the water only when in shallow water, where it could rest its body on the bottom. Also, the weight of the neck, the limited musculature, and the limited movement between the vertebrae would have prevented elasmosaurids from raising head and neck very high. The head and shoulders of theses animals probably acted as a rudder. If they moved the anterior part of the body in a certain direction, it would cause the rest of the body to move in that direction. Thus, elasmosaurids would have been unable to swim in one direction while moving its head and neck either horizontally or vertically in a different direction.[47]
One study found that the necks of elasmosaurids were capable of 75–177˚ of ventral movement, 87–155° of dorsal movement, and 94–176° of lateral movement, depending on the amount of tissue between the vertebrae, which probably increased in rigidness towards the back of the neck. The researchers concluded that lateral and vertical arches and shallow S-shaped curves were feasible in contrast to the "swan-like" S-shape neck postures that required more than 360° of vertical flexion.[55]
The exact function of the neck of elasmosaurids is unknown,[2] though it may have been important for hunting.[47] It has also been suggested that the long necks of plesiosaurs served as a snorkel and allowed them to breathe air while the body remained underwater. This is disputed as there would be largehydrostatic pressure differences, particularly for the extremely long-necked elasmosaurids. The neck anatomy of elasmosaurids was capable of making a gentle slope to allow them to breathe at the surface but would have required them to engage in energy-expensive swimming at the sub-surface. In addition, the longer neck would also have increaseddead space, and the animals may have required larger lungs. The neck could have had other vulnerabilities, for example being a target for predators.[56]
Simulation of water flow on 3D models showed that more elongated necks, such as those of elasmosaurids, did not increase drag force while swimming compared to shorter necked plesiosaurs. On the other hand, bending the neck sideways did increase drag force, more so in forms with very long necks.[57] Another study found the long necks of elasmosaurs would normally increase drag during forward swimming but this was cancelled out by their large torsos, and hence large body sizes may have facilitated the evolution of longer necks.[58]
The flexion ranges of elasmosaurids necks would have allowed them to employ a number of hunting methods including "benthic grazing", which would have involved swimming close to the bottom and using the head and neck to dig for prey on the sea floor. Elasmosaurids may also have been active hunters in thepelagic zone, retracting their necks to launch a strike or using side-swipe motions to stun or kill prey with their laterally projected teeth (likesawsharks).[55] It has also been suggested that the predatory abilities of elasmosaurids have been underestimated; their large skulls, big jaw-muscles, strong jaws, and long teeth indicate they could prey on animals between 30 centimeters (12 in) and 2 meters (6.6 ft) long, as indicacted by stomach contents including those of sharks, fish,mosasaurs, andcephalopods.[59]
It is possible that elasmosaurids stalked schools of fish, concealing themselves below and moving the head slowly up as they approached. The eyes of theses animals were at the top of the head and allowed them to see directly upward. Thisstereoscopic vision would have helped it to find small prey. Hunting from below would also have been possible, with prey silhouetted in the sunlight while concealed in the dark waters below. Elasmosaurids probably ate smallbony fish andmarine invertebrates, as their small, non-kinetic skulls would have limited the size of the prey they could eat. Also, with their long, slender teeth adapted for seizing prey and not tearing, elasmosaurids most certainly swallowed their prey whole.[47][55]
Elasmosaurids are commonly found with severalgastroliths. A specimen ofStyxosaurus contained fragmented fish bones and stones in the abdominal region behind the pectoral girdle. The fish remains were identified asEnchodus and otherclupeomorph fish.[60] Several different functions have been proposed for gastroliths, including aiding in digestion, mixing food content, mineral supplementation, and storage and buoyancy control.[61]