 | |
 ASTM's headquarters inWest Conshohocken, Pennsylvania | |
| Founded | 1902; 123 years ago (1902) |
|---|---|
| Headquarters | West Conshohocken, Pennsylvania, U.S |
Number of locations | Additional offices inBelgium,Canada,China,Peru, andWashington, D.C. |
Area served | United States (1898–present) International (2001–present) |
| Members | 30,000 |
| Website | www |
ASTM International, formerly known asAmerican Society for Testing and Materials, is astandards organization that develops and publishes voluntary consensus technicalinternational standards for a wide range of materials, products, systems and services. Some 12,575 apply globally. The headquarters is inWest Conshohocken, Pennsylvania, about 5 mi (8.0 km) northwest ofPhiladelphia. It was founded in 1902 as the American Section of the International Association for Testing Materials.
In addition to its traditional standards work, ASTM operates several global initiatives advancingadditive manufacturing, advanced manufacturing, and emerging technologies, including theAdditive Manufacturing Center of Excellence (AM CoE), the acquisition ofWohlers Associates for market intelligence and advisory services, and theNIST-funded Standardization Center of Excellence (SCOE).
.svg)
In 1898, a group ofscientists andengineers, led by chemist, industry leader, and proponent of standardizationCharles Dudley, formed the American Society for Testing Material (ASTM) to address the frequentrail breaks affecting the fast-growingrailroad industry. The group developed a standard for the steel used to fabricate rails.
In 1961 the name "American Society for Testing and Materials" was adopted.
In 2001, ASTM officially changed its name to "ASTM International" and added the tagline "Standards Worldwide".[citation needed]
In 2014, the tagline changed to "Helping our World Work better." ASTM International had offices in Belgium, Canada, China, Peru, Washington, D.C., and West Conshohocken, PA.[1][2]
In April 2016, theSafety Equipment Institute (SEI) became a subsidiary of ASTM International. SEI is an accredited third-party certification organization that certifies various types of PPE[clarification needed] to industry consensus standards.[3]
On June 9, 2022, it was announced that theEuropean Committee for Standardization (CEN) and ASTM International agreed to extend and expand a Technical Cooperation Agreement from 2019.[4]
Membership in the organization is open to anyone interested in its activities.[5] Standards are developed within committees, and new committees are formed as needed, upon request of interested members. Membership in most committees isvoluntary and is initiated by the member's request, not by appointment or invitation.
Members are classified as users, producers, consumers, and "general interest". The latter includes academics and consultants. Users include industry users, who may be producers in the context of other technical commodities, and end-users such as consumers. To meet the requirements ofantitrust laws, producers must constitute less than 50% of every committee or subcommittee, and votes are limited to one per producer company. Because of these restrictions, there can be a substantial waiting-list of producers seeking organizational memberships on the more popular committees. Members can participate without a formal vote and their input will be fully considered.
As of 2015, ASTM has more than 30,000 members, including over 1,150 organizational members, from more than 140 countries.[6][7] The members serve on one or more of 140+ ASTM Technical Committees. ASTM International has several awards for contributions to standards authorship, including theASTM International Award of Merit (the organization's highest award)[8] ASTM International is classified by the United StatesInternal Revenue Service as a501(c)(3) nonprofit organization.
In 2018, ASTM International launched theAdditive Manufacturing Center of Excellence (AM CoE), a global initiative uniting industry, government, and academia to accelerate research, development, standardization, certification, and industrialization ofadditive manufacturing (AM). Headquartered inWashington, D.C., with a network of experts across the Americas, Europe, and Asia, the AM CoE focuses on bridging the gap between cutting-edge research and consensus-based standards.
The AM CoE’s main pillars include:
These initiatives aim to close standardization gaps, support qualification frameworks, and promote the broader adoption of additive manufacturing technologies across theaerospace,defense industry,medical devices,automotive industry, andenergy sectors.
In 2021, ASTM International acquiredWohlers Associates, a globally recognized consulting firm and market intelligence provider in additive manufacturing and3D printing. Known for its authoritative Wohlers Report, Wohlers Associates delivers deep industry analysis, technology trends, and forecasts covering hardware, software, materials, and applications across the AM ecosystem.
Operating within ASTM’s Advanced Manufacturing Division, Wohlers Associates continues to provide:
Funded by theNational Institute of Standards and Technology (NIST), the Standardization Center of Excellence (SCOE) is a more recent initiative under ASTM International. SCOE focuses on advancing innovation and standardization for critical and emerging technologies, offering a coordinated framework connecting R&D, standards development, workforce readiness, and regulatory alignment.
The SCOE enables cross-industry collaboration to ensure that next-generation technologies are developed, validated, and deployed with trusted, globally harmonized standards.
ASTM International has no role in requiring or enforcing compliance with its standards. The standards may become mandatory when referenced by an external contract, corporation, regulation, law, or government.[6]
In the United States, ASTM standards have been adopted by incorporation or reference in many federal, state, and municipal government regulations. The 1995National Technology Transfer and Advancement Act requires the Federal government to use privately developed consensus standards whenever possible. The Act reflects what had long been recommended as best practice within the Federal government. Other governments, including state and foreign, have also referenced ASTM standards.[9]
Corporations doing international business may choose to reference an ASTM standard. All toys sold in the United States must meet the safety requirements of ASTM F963, Standard Consumer Safety Specification for Toy Safety, as part of theConsumer Product Safety Improvement Act (CPSIA) of 2008. The law makes the ASTM F963 standard a mandatory requirement for toys while the Consumer Product Safety Commission (CPSC) studies the standard's effectiveness and issues final consumer guidelines for toy safety.[10]
Media related toASTM international at Wikimedia Commons