| Development | |
|---|---|
| Designer | Jacques de Ridder |
| Location | Belgium |
| Year | 1985 |
| No. built | 220 |
| Builder | ETAP Yachting |
| Role | Cruiser |
| Name | ETAP 30 |
| Boat | |
| Displacement | 7,940 lb (3,602 kg) |
| Draft | 5.90 ft (1.80 m) with the keel down |
| Hull | |
| Type | monohull |
| Construction | glassfibre |
| LOA | 29.60 ft (9.02 m) |
| LWL | 25.08 ft (7.64 m) |
| Beam | 10.33 ft (3.15 m) |
| Engine type | Volvo 2002 18 hp (13 kW)diesel engine |
| Hull appendages | |
| Keel/board type | fin keel |
| Ballast | 3,032 lb (1,375 kg) |
| Rudder | internally-mounted spade-typerudder |
| Rig | |
| Rig type | Bermuda rig |
| I foretriangle height | 33.30 ft (10.15 m) |
| J foretriangle base | 11.00 ft (3.35 m) |
| P mainsail luff | 36.60 ft (11.16 m) |
| E mainsail foot | 12.00 ft (3.66 m) |
| Sails | |
| Sailplan | fractional riggedsloop |
| Mainsail area | 259 sq ft (24.1 m2) |
| Jib/genoa area | 289 sq ft (26.8 m2) |
| Spinnaker area | 593 sq ft (55.1 m2) |
| Upwind sail area | 549 sq ft (51.0 m2) |
| Downwind sail area | 852 sq ft (79.2 m2) |
ETAP 30i → | |
TheETAP 30 is aBelgiansailboat that was designed byJacques de Ridder as acruiser and first built in 1994.[1][2][3][4][5]
The design was built byETAP Yachting inBelgium between 1985 and 1994, with 220 boats completed, but it is now out of production.[1][2][3][6][7]
The ETAP 30 is a recreationalkeelboat, built predominantly ofpolyesterglassfibre-foam sandwich construction, with wood trim. The use of foam sandwich construction makes the boat unsinkable. It has a 7/8fractionalsloopmasthead sloop rig withaluminum spars, a deck-stepped mast, wirestanding rigging and a single set of swept spreaders. The hull has araked stem, areverse transom, an internally-mounted spade-typerudder controlled by atiller and a finkeel or optional shoal draft keel. It displaces 7,940 lb (3,602 kg) and carries 3,032 lb (1,375 kg) ofcast iron ballast.[1][2]
The boat has a draft of 5.90 ft (1.80 m) with the standard keel and 4.25 ft (1.30 m) with the optional shoal draft keel.[1][2][3]
The boat is fitted with aVolvo 2002 18 hp (13 kW)diesel engine for docking and manoeuvring. The fuel tank has a capacity of 11 U.S. gallons (42 L; 9.2 imp gal).[1][2][3]
The design has sleeping accommodation for five people, with a double "V"-berth in the bow cabin, two straight settees in the main cabin, plus an aft berth on starboard side. Thegalley is located on the port side just forward of thecompanionway ladder. The L-shaped galley is equipped with a two-burner stove, an 11.4 U.S. gallons (43 L; 9.5 imp gal) capacityicebox and a sink. Thehead is located just aft of the bow cabin. The fresh water tank has a capacity of 21 U.S. gallons (79 L; 17 imp gal).[1][2][3]
For sailing downwind the design may be equipped with a symmetricalspinnaker of 593 sq ft (55.1 m2). It has ahull speed of 6.81 kn (12.61 km/h).[2][3]
The boat was at one time supported by a class club, theETAP Owners Association.[8]
A 2009Yachting Monthly review stated, "In many people's view, this was the best yacht Etap produced – and although she lacks an aft cabin, she was far ahead of her time in many other respects, not least her easily-driven hull, designed by Jac de Ridder, which was streets ahead of most other 30ft cruisers when she was launched, in 1983. She handles delightfully on all points of sail and is still a fairly fast cruiser for her length by today’s standards. The hull’s high freeboard is effectively masked by a thick gunwale stripe and the low-profile cabin top gives her an almost racy appearance. Down below she has five sea-berths (or six at anchor), including a quarterberth, and a heads compartment amidships. The galley is spacious and seamanlike, and she has a very practical chart table. Etap's tendency towards short coachroofs means that headroom in the heads and forecabin is restricted but it is fair in other parts of the boat The standard of fit-out is good, with solid teak trim, but stowage, as always with these double-skinned yachts, is limited."[9]