This article includes a list ofgeneral references, butit lacks sufficient correspondinginline citations. Please help toimprove this article byintroducing more precise citations.(September 2012) (Learn how and when to remove this message)

EMD GP7
ITC 1605, at theIllinois Railway Museum
Type and origin Power type Diesel-electric Builder General Motors Electro-Motive Division (EMD) General Motors Diesel (GMD) Model GP7 Build date October 1949 – May 1954 Total produced 2,729 (plus 5B units)
Specifications Configuration: ​  • AAR B-B Gauge 4 ft 8+1⁄2 in (1,435 mm)standard gauge Wheel diameter 40 in (1.016 m)[1] Minimum curve 19° (301 ft (91.74 m) radius) Wheelbase 40 ft (12.19 m) Length 55 ft 11 in (17.04 m) Width 10 ft 3 in (3.12 m) Height 15 ft 0 in (4.57 m) Loco weight 246,000 lb (112,000 kg) Fuel capacity 1,600 US gal (6,100 L; 1,300 imp gal)[1] Lubricant cap. 200 US gal (760 L; 170 imp gal)[1] Coolant cap. 230 US gal (870 L; 190 imp gal)[1] Sandbox cap. 18 cu ft (510 dm3)[1] Prime mover EMD16-567B[2] RPM range 275–800[1] Engine type V16Two-stroke diesel Aspiration Roots blower Displacement 9,072 cu in (148.66 L) Generator EMD D-12-B[1] Traction motors (4) EMD D-27-B[1] Cylinders 16 Cylinder size 8+1⁄2 in × 10 in (216 mm × 254 mm) Loco brake Independent air;optional:dynamic brakes Train brakes Air, schedule 6-BL[3] or 6-BLC.[4] Schedule 24-RL offered as optional.
Performance figures Maximum speed 65 mph (105 km/h) Power output 1,500 hp (1,119 kW) Tractive effort Starting: 65,000 lbf (29,484 kgf) @25% Continuous: 40,000 lbf (18,144 kgf) @9.3 mph (15 km/h)
Career Operators See list Class Erie- MFSE-15a NYC- various P&E- 5612-5623 DRS-4c 5624-5625 DRS-4d P&LE- various NKP- ERS-15 PRR- ERS15 WAB- D15 Disposition Some retired, some rebuilt intoGP8s orGP10s, many in service

TheEMD GP7 is a four-axle (B-B) diesel-electriclocomotive built byGeneral Motors Electro-Motive Division andGeneral Motors Diesel between October 1949 and May 1954.^[2]

The GP7 was the first EMD road locomotive to use ahood unit design instead of acar-body design. This proved to be more efficient than the car body design as the hood unit cost less to build, was cheaper and easier to maintain, and had much better front and rear visibility for switching.^[5] Power was provided by anEMD 567B 16-cylinder engine which generated 1,500horsepower (1,119 kW).^[6] The GP7 was offered both with andwithout control cabs, and those built without control cabs were called a GP7B. Five GP7B's were built between March and April 1953.^[2]

Of the 2,734 GP7's built, 2,620 were for American railroads (including 5 GP7B units built for theAtchison, Topeka and Santa Fe Railway), 112 were built for Canadian railroads, and 2 were built for Mexican railroads.

This was the first model in EMD's GP(General Purpose) series of locomotives. Concurrently, EMD offered a six-axle (C-C) SD(Special Duty) locomotive, theSD7.^[5] The GP7 was replaced by theGP9 model in GM-EMD'sGP sequence.

ALCO,Fairbanks-Morse, andBaldwin had all introducedroad switchers before EMD, whose first attempt at the road-switcher, theBL2 was unsuccessful in the market, selling only 58 units in the 14 months it was in production.^[7] Its replacement, the GP7, swapped the truss-framed stressed car body for an un-stressed body on a frame made from flat, formed and rolled structural steel members and steel forgings welded into a single structure (a "weldment"), a basic design which is still being employed today. In heavy service, the GP7’s frame would bow and sag over time.^[8] This defect was corrected in later models.

The GP7 proved very popular, and EMD was barely able to meet demand, even after opening a second assembly plant atCleveland, Ohio. Later, locomotives in EMD's GP-series came to be nicknamed ‘Geeps’. Many GP7s both high and short-hood can still be found in service today on shortline railroads and industrial operators. Although most Class 1 roads stopped using these locomotives by the 1980s some remain in rebuilt form on some majorClass I railroads, as switcher locomotives.^{[citation needed]} The "GP" designation stood for "general purpose", while the "7" had no meaning other than matching theEMD F7 cab unit then in production.

The GP7,GP9 andGP18 locomotives share a similar car-body that evolved over time. Most GP7s had three sets of ventilation grills under the cab (where the GP9 only had one), and two pair of grills at the end of the long hood (where only the pair nearest the end was retained on the GP9).^[2] However, some late GP7s were built with car-bodies that were identical to early GP9s. Early GP7s had a solid skirt above the fuel tank, while late GP7s and early GP9s had access holes in the skirt (see photo of Illinois Terminal 1605, top left). Many railroads later removed most of the skirt to improve access and inspection.

Locomotives could be built with theengineer’scontrol stand installed for either the long hood, or the short hood designated as the front. Two control stands for either direction running was also an option, but one end would still be designated as the front for maintenance purposes. The GP7 was also available with or withoutdynamic brakes, and asteam generator installed in the short hood was also an option. In the latter case, the 1,600-US-gallon (6,100 L; 1,300 imp gal) fuel tank was divided, with half for diesel fuel, and half for boiler water. One option available for locomotives without dynamic brakes, was to remove the two 22.5 in × 102 in (570 mm × 2,590 mm)^[9] air reservoir tanks from under the frame, and replace them with four 12 in × 150.25 in (305 mm × 3,816 mm)^[4] tanks that were installed on the roof of the locomotive, above the prime mover. These "torpedo tubes" as they were nicknamed, enabled the fuel and water tanks to be increased to 1,100 US gallons (4,200 L; 920 imp gal) each, although some railroads opted for roof-mounted air tanks and 2,200-US-gallon (8,300 L; 1,800 imp gal)^[10] fuel tanks on their freight ‘Geeps’.

GP7 locomotives were built at GMD's London Ontario plant for domestic Canadian railway purchasers, and for some US railroads like the C&O and Wabash who owned and operated over trackage in Canada (specifically the southern Ontario area).

There are five GP7s on A J Kristopan's EMD Serial number page that reused previous serial numbers: B&O 6405 (preserved), CRI&P 1308 (2nd), L&N 501 (2nd) and 502 (2nd), and SLSF 615 (2nd). These rebuilt units were rebuilt as new on new frames. Another rebuild by GMD is that CN 4824 was rebuilt as a GP7 with parts from an F3A in October 1958.

Over 100 GP7s and four of the GP7Bs were built with 567BC or 567C engines starting in March 1953 through May 1954. These are noted on the roster above.

Many railroads rebuilt their GP7s with low short hoods; some railroads went further in their rebuilding than others.Missouri Pacific Railroad upgraded their GP7s with 567BC engines (a B-block upgraded to C-block specs) and replaced the standard EMD 2-stack exhaust with a 4-stack "liberated" exhaust, raising their power output to 1,600 horsepower (1.19 MW).^[12]

Illinois Central Railroad rebuilt most of its GP7s with 567BC engines, 4-stack exhausts, paper air-intake filters, 26-L brakes (their original 6-BL brakes made them operationally incompatible with locomotives fitted with 24-RL brakes).^[13] All but the first locomotive rebuilt had their front (short) hood reduced in height for improved crew visibility. The IC designated these rebuilt locomotivesGP8. The IC acquired many second-hand units through Precision National Corporation (PNC), and then started offering their GP8/GP10 rebuilding services to other railroads through their Paducah Shops (note, a rebuilt "Paducah Geep" was designated a GP8 orGP10 depending on the power output of the rebuilt engine, not necessarily what it was rebuilt from).

In 1960 the Alaska Railroad purchased a dozen GP7Ls from the US Army and rebuilt eleven of them in 1965 with low short hoods for better visual clearance. One of the ten remaining Alaska GP7s was rebuilt by Morrison-Knudsen in 1976. The other nine units were rebuilt at Paducah Shops in 1976-1977.

Canadian Pacific Railway rebuilt their GP7 fleet in the early 1980's as GP7u units for yard service, including a chopped short hood, new number boards and front cab windows, and upgrading the 567B prime movers with 645 power assemblies and to "BC" engine block specs (some upgraded with 567C engine blocks out of retired F-units).

Numerous GP7s have been preserved on tourist lines and in museums. Holders include:

• List of GM-EMD locomotives
• List of GMD Locomotives

Wikimedia Commons has media related toEMD GP7 locomotives.

• "The History of EMD Diesel Engines".Pacific Southwest Railway Museum. Archived fromthe original on July 22, 2014. RetrievedDecember 14, 2005.
• "Northern Pacific Railway diesel locomotive diagrams".Northern Pacific Railway Historical Association website. RetrievedSeptember 2, 2008.
• Dorin, Patrick C. (1972).Chicago and North Western Power. Burbank, California: Superior Publishing. pp. 106–107.ISBN 0-87564-715-4.
• Ephraim, Max Jr. (June 1995). "The Beloved Geep".Trains.55 (6):44–47.ISSN 0041-0934.
• Marre, Louis A.; Jerry A. Pinkepank (1989).The Contemporary Diesel Spotter's Guide.Milwaukee, Wisconsin: Kalmbach Publishing Company.ISBN 0-89024-088-4.
• Pinkpank, Jerry A (1973).The Second Diesel Spotter's Guide. Kalmbach Books. pp. 12, 26,52–56.ISBN 0-89024-026-4.
• Schrenk, Lorenz P.; Robert L. Frey (1988).Northern Pacific Railway: Diesel Era, 1945–1970.San Marino, California:Golden West Books.ISBN 0-87095-102-5.

• B-B locomotives
• Electro-Motive Division locomotives
• General Motors Diesel locomotives
• Diesel–electric locomotives of the United States
• Railway locomotives introduced in 1949
• Locomotives with cabless variants
• Standard-gauge locomotives of the United States
• Standard-gauge locomotives of Canada
• Standard-gauge locomotives of Mexico
• Diesel–electric locomotives of Canada
• Diesel–electric locomotives of Mexico
• Atchison, Topeka and Santa Fe Railway locomotives
• Baltimore and Ohio locomotives
• Canadian National Railway locomotives
• Canadian Pacific Railway locomotives
• Chesapeake and Ohio locomotives
• Chicago and North Western Railway locomotives
• Chicago, Burlington and Quincy locomotives
• Delaware, Lackawanna and Western locomotives
• Denver and Rio Grande Western Railroad locomotives
• Erie Railroad locomotives
• Great Northern Railway (United States) locomotives
• Illinois Central locomotives
• Maine Central Railroad locomotives
• New York Central Railroad locomotives
• Nickel Plate Road locomotives
• Northern Pacific Railway locomotives
• Pennsylvania Railroad locomotives
• Philadelphia and Reading Railroad locomotives
• Soo Line locomotives
• Diesel locomotives of Southern Railway (U.S.)
• St. Louis–San Francisco Railway locomotives
• Union Pacific Railroad locomotives
• Western Pacific Railroad locomotives

• Articles with short description
• Short description is different from Wikidata
• Articles lacking in-text citations from September 2012
• All articles lacking in-text citations
• All articles with unsourced statements
• Articles with unsourced statements from June 2017
• Commons category link is on Wikidata