| MA-1 | |
|---|---|
| Type | |
| Place of origin | Myanmar |
| Service history | |
| In service | 2002–present |
| Used by | SeeUsers |
| Wars | |
| Production history | |
| Designer | Yisrael Galili ofIsrael Military Industries[1][a] |
| Designed | 1991 |
| Manufacturer | Ka Pa Sa No. 1 Myanmar Fritz Werner Industries[b] |
| Produced | 2002–Present |
| Variants | SeeVariants |
| Specifications | |
| Mass |
|
| Length |
|
| Cartridge | 5.56×45mm NATO |
| Action | Gas-operated,rotating bolt |
| Rate of fire |
|
| Muzzle velocity | 950 m/s (3,120 ft/s) |
| Effective firing range | 400 m (437 yd) |
| Feed system |
|
| Sights |
|
| References | [3][4][5][6] |
TheDI MA-1[c] is a family of Myanmar-madeassault rifles chambered for5.56×45mm NATO, produced by theMyanmar Directorate of Defence Industries. They are based on theIMI Galil with some localised modifications produced with assistance from Israel.[8]
The MA rifles are primarily used by the Tatmadaw,[9] although it is also seen with theMyanmar Police Force.[10]
The MA designation on the weapon meansMyanmar Army.[11] The series are sometimes erroneously referred to as the EMERK-3.[2]
The Tatmadaw was armed with the BA63 (Burma Army 63), the Myanma-made version of theHeckler & Koch G3A3 battle rifle[12] made under license agreement with West Germany under the Ka Pa Sa factories in partnership with Fritz Werner Industry Ausrustungen-Gmbh (FRG) and the German Technical Corporation Agency.[13] However, it was considered too heavy for Myanma soldiers to use in jungle warfare.[7]
A team of engineers from IMI reportedly visitedYangon in 1991, helping with preparing the foundation to manufacture the MA-1s.[14][15] Reports cite Israel's support of Myanmar in developing the MA-1 despite repeated denials by Israeli officials based in Myanmar, Singapore and Thailand.[8] According to William Ashton, Israel sought Myanmar out in order to gain international allies due to the constant threat of being surrounded by hostile states in the Middle East.[8]
The MA-series was first spotted in the early 2000s at numerousTatmadaw Armed Forces Day parades and demonstrations,[16][15] replacing the previousHeckler & Koch G3 rifles that were in service.[7]
By 2009, it was reported that the Tatmadaw was almost fully equipped with the MA series.[7] MA rifles have also been seen usage by theKaren National Liberation Army,[17]Shan State Army (RCSS)[7] and theTa'ang National Liberation Army,[18] captured from Tatmadaw forces[17] or from defecting soldiers.[19] TheKarenni Army has also used MA-1s taken from Myanma soldiers.[20]
From 2014, the Mk II variant is being used by the Tatmadaw as their standard rifle.[21]
Plans were made to fully adopt theDI MA-1 Mk. III, but plans are halted due to quality issues.[22]
In March 2022, the Tatmadaw showcased a new type of the MA-1 Mk. II rifle in the Armed Forces Day parade, which has a telescopic stock and a picatinny rail on the upper receiver.[4] It was supposed to be shown in public in 2020, but was postponed due to the COVID-19 pandemic.[4]
In May 2023, MA-1 and MA-3s are used by thePDF in the civil war, captured from Myanma soldiers and police officers.[10]
Serial production started in 2002 after signing an agreement with IMI.[7] The assault rifles were mostly made at Ka Pa Sa No 1 or DI-1,[11] a factory located near Inya Lake that serves as the main factory.[7][23]
The MA-1 rifles are made with ventilated handguards and horizontal charging handles, unlike the Galil which has a vertical charging handle.[2] Early models (Mk. I) have curved cheekpieces in the buttstocks with later models (Mk. II) omitting this.[24] MA rifles are compatible with Galil magazines,[2] although they can use polymer magazines.[24] Any MA rifle can use a clone of the Type 81 bayonet if a bayonet lug is present.
They were initially introduced with wooden handguards; early models were made with brown polymer furniture and rounded, smooth pistol grips.[25] Later versions were produced with black furniture and clear cut Galil grips, designated as the Mk II.[26] It also uses synthetic alloys and plastics in its construction.[21]
An indicator for a MA rifle that is optimized to fire rifle grenades is the presence of tall iron sights.[24] The rifles can use the MG-2 rifle grenade.[27]
In an interview back in 2009 with Sai Sheng Murng, the deputy spokesman of theShan State Army (RCSS), he mentioned that foreign-made 5.56 NATO ammo cannot be used in the MA rifles while Myanma-made ammo can work with foreign assault rifles chambered in the same caliber.[7]
The selectors consist of safe, semi-auto and full-auto mode.[25]
Standard assault rifle with a bayonet lug for the option to have a bayonet mounted.[2] It's reported by convicted porters under the Tatmadaw that Myanma soldiers would write the battalion number on its stock.[28]
The bipod was not made standard with the MA-1s with the cleaning kit stored in a hollow space in the buttstock. The MA-1s are not equipped with a pistol grip-type safety system.[29]
Light machine gun version with a heavy barrel and a bipod mounted.[30] It was originally developed without the idea of using a drum magazine, relying on standard capacity magazines,[31] but it can be used with drum magazines.[5]
The handguard has two rows of ventilation holes that are parallel to the barrel.[29] It has a carry handle, long/heavy barrel and bipod.[25]
The bipods used are thin-based for Mk. I versions, but the Mk. II versions are seen with bipods that are cloned from those used for the M60 GPMG.[5]
Carbine version with a folding metal buttstock.[32] The stock is rarely used due to great difficulty in moving it[29] and to fully depress the lock in order to unfold it.[25] Early models were badly made due to the materials used in its manufacture before they were fully resolved through the Mk II variant.
A version of the MA-1 equipped with an underbarrel grenade launcher (UBGL),[32] known as the BA203 (Burma Army 203).[5] It is an unlicensed clone of the MKEK T-40.[33][d]
The UBGL is permanently fixed, which cannot be removed.
The Mk. II variant saw the use ofpolymer to replace the blackstock of the Mk. I.[5] It was also often equipped with polymer stocks, pistol grips, and fore-ends as standard issue.[25]
The newer Mk II variants were shown overseas at the 2019 Defense and Security exhibition in Bangkok, Thailand, which was visited byMin Aung Hlaing.[35] This variant was publicly shown in 2022 with the Tatmadaw with a telescopic stock and picatinny rail on the upper receiver.[4] The new Mk IImagazine is based on theSouth African polymerVektor R4 magazine.[24] The black moulds used in the newer Mk II variants were allegedly based on moulding materials provided by CAA Industries.[36]
By theMyanmar Civil War of 2021, all Mk. I variants were replaced by the Mk. II.
Known asMyanmar Army Sniper, a designated marksman rifle variant based on the MA-2.[37] It's chambered in 7.62x51 NATO caliber and fires from a 10-round magazine.[37] There are reports indicating that production may have started as early as 2011 to 2012.[38]
It has a total weight of 5.3 kg, a total length of 1140 mm and a barrel length of 620 mm.[37] The rifle has a muzzle velocity of 852 m/s and an effective range of 1000 meters.[37]
The MA-S consist of a Mk. I and Mk. II version. The Mk. I resembles a Dragunov that can take 10-round magazines[5][37] with a PSO-1 scope.[39] The Mk. II resembles Zastava-based rifles that can take 20-round magazines.[5]
The Mk. II has a picatinny rail under the gas block to install a bipod.[5] It comes in two colors; green or black furniture.[5] A version of the Mk. II in a camo finish was on display at the 2019 Defence and Security arms fair.[5]
There is a MA-S variant made for Tatmadaw soldiers participating in overseas shooting competitions such as the ASEAN Armies Rifle Meet.[40]
Myanmar: Widely used by the Tatmadaw and the Myanmar Police.
Karen National Liberation Army
Karenni Army
People's Defence Force (Myanmar)_Flag.svg)
Shan State Army (RCSS){{cite book}}: CS1 maint: multiple names: authors list (link)[page needed]