TheCurtiss Model 55 Kingbird was an airliner built in small numbers in the United States in the early 1930s. It was a twin-engine aircraft with a fuselage derived from the single-engineCurtiss Thrush. The Kingbird had two engine nacelles mounted on the struts on either side of the fuselage that braced the wing and the outrigger undercarriage. A distinctive design feature was the aircraft's blunt nose, located behind the propeller arcs. This allowed the engines to be mounted closer to each other and to the aircraft's centerline, therefore minimising asymmetrical thrust in case of an engine failure. For the same reason, the Thrush's single tailfin was replaced by twin tails on the Kingbird, and the main production model, theD-2 fitted a second horizontal stabilizer and elevator between these fins.
Eastern Air Transport was to be the Kingbird's main operator, flying 14 of them for a few years. The United States Marine Corps also purchased an example, first designating itJC-1, thenRC-1 and using it as an air ambulance.
Prototype powered by 185 hp (138 kW) six-cylinderCurtiss R-600 Challenger engines. One built, but found to be underpowered. Later converted to Kingbird J-1.[1]
Kingbird D-1
Second and third prototypes (previously Kingbird J-3 and J-2) powered by 225 hp nine-cylinderWright Whirlwind J-6-7radial engines. Later converted to D-2 standard.[2]
Kingbird D-2
Production aircraft with two 300 hp (224 kW) Whirlwind J-6-9 engines. 14 built plus two converted from D-1s.[1]
Kingbird D-3
One-off Curtiss executive transport. Two 330 hp (246 kW) Whirlwind J-6-9 engines. Seats for five passengers.[3]
Kingbird J-1
First prototype after re-engining with Whirlwind engines.[3]
