| Cookeite | |
|---|---|
 Cookeite on quartz, Paris, Maine, topotype deposit | |
| General | |
| Category | IX |
| Formula | LiAl 4(Si 3Al)O 10(OH) 8 |
| Strunz classification | 09.EC.55 |
| Dana classification | 71.04.01.02 |
| Crystal system | monoclinic |
| Crystal class | prismatic; C2 orCc |
| Identification | |
| Color | white, green, brown, golden, pink |
| Twinning | around [310] |
| Cleavage | perfect over {001} |
| Fracture | flexible |
| Tenacity | 2,5 |
| Luster | pearly; silky |
| Density | from 2.58 to 2.69 |
| Refractive index | α = 1,572–1,576,β = 1,579–1,584,γ = 1,589–1,6 |
| Birefringence | biaxial (+), 0,0170–0,0240 2V = 35 to 60° |
| Pleochroism | x = y: pale green to pink, z: colorless to pale yellow |
| Ultravioletfluorescence | cream yellow (SW) |
Cookeite is amineral species of thesilicate group and the phyllosilicate subgroup, part of thechlorite family, with the formula LiAl4(Si3Al)O10(OH)8.[1] This soft, low-density mineral of variable color has acrystalline structure made up of alternating layers LiAl2(OH)6 and Al2O4(OH)2Si8O12 having severalpolytypes. Cookeite is often found as a product ofhydrothermal alteration of silicates inpegmatites. It forms at relatively low temperatures (below 200 °C) and variable pressures.
Cookeite was described in 1866 bymineralogistGeorge Jarvis Brush[2] and dedicated toJosiah Parsons Cooke (1827-1894), an American mineralogist andchemist atHarvard University,Cambridge,Massachusetts.[3]
The topotype deposit is located in the Mount Mica Quarry,Paris,Oxford County,Maine,USA.
Type samples are deposited atYale University,New Haven,Connecticut, USA (No. 2.3728).[4]
Cookeite is a white mineral with green, brown, golden, or pinkish hues of varying intensity. It occurs as pseudo-hexagonal crystals, spherules, radiated or fibrous aggregates. It has a pearly or silky sheen, and is transparent to translucent. It is flexible but inelastic, with perfectcleavage on the{001} plane andmicaceousfracture[5] (formation of thin sheets or flakes).
Cookeite is a soft mineral, as its hardness only ranges from 2.5 to 3.5 on theMohs scale. It is also not very dense, with a measured density ranging from 2.58 to 2.69.[6] Cookeite has a pale green to pinkpleochroism along the X and Y axes, and is colorless to pale yellow along the Z axis. It has a white line andfluoresces creamy-yellow fairly regularly.[5]
Cookeite, with the formula LiAl4(Si3Al)O10(OH)8, has a molecular mass of 522.16 u, or 8.67 × 10−25 kg. It is therefore composed of the following elements:
| Chemical composition of the mineral | |||
|---|---|---|---|
| Element | Number (formula) | Atomic mass (u) | % of molecular mass |
| Lithium | 1 | 6,94 | 1, 33% |
| Silicium | 3 | 84,26 | 16,14 % |
| Aluminium | 5 | 134,91 | 25,84 % |
| Hydrogen | 8 | 8,06 | 1,54 % |
| Oxygen | 18 | 287,99 | 55,15 % |
| Total : 35 elements | Total : 522,16 u | Total : 100% | |
Impurities often found in cookeite includeiron,manganese,magnesium,calcium,sodium, andpotassium.[6]
The silicon in the silicate layers may be partly substituted by aluminum,boron orberyllium, with a fairly constant (Al,B,Be)/Si ratio.[1]
Cookeite is a polytype of chlorite.
According toStrunz's classification, it belongs to the class of silicates (IX), more precisely micaceousphyllosilicates (9.E) composed of tetrahedral and octahedral lattices (9.EC)
| Members of micaceous phyllosilicate group 9.EC.55 | |||
|---|---|---|---|
| Mineral | Formula | Point group | Space group |
| Baileychlore | (Zn,Al) 3[Fe 2Al][Si 3AlO 10](OH) 8 | 1 | C1 |
| Borocookeite | Li 1+3xAl 4-x(BSi 3)O 10(OH,F) 8 (x ≤ 0,33) | 2/m | C2/m |
| Chamosite | (Fe,Mg,Fe) 5Al(Si 3Al)O 10(OH,O) 8 | 2/m | C2/m |
| Clinochlore | (Mg,Fe) 5Al(Si 3Al)O 10(OH) 8 | 2/m | C2/m |
| Cookeite | LiAl 4(Si 3Al)O 10(OH) 8 | 2 or 2/m | C1, C2 orCc |
| Donbassite | Al 2[Al 2,33][Si 3AlO 10](OH) 8 | 2/m | C2/m |
| Franklinfurnaceite | Ca(Fe,Al)Mn 4Zn 2Si 2O 10(OH) 8 | 2 | C2 |
| Glagolevite | NaMg 6[Si 3AlO 10](OH,O) 8·H 2O | 1 | C1 |
| Gonyerite | Mn 3[Mn 3Fe][(Si,Fe) 4O 10](OH,O) 8 | orthorhombic pseudo-hexagonal | unknown |
| Nimite | (Ni,Mg,Fe) 5Al(Si 3Al)O 10(OH) 8 | 2/m | C2/m |
| Odinite | (Fe,Mg,Al,Fe,Ti,Mn) 2,5(Si,Al) 2O 5(OH) 4 | m | Cm |
| Orthochamosite | (Fe,Mg,Fe) 5Al(Si 3Al)O 10(OH,O) 8 | orthorhombic pseudo-hexagonal | unknown |
| Pennantite | Mn 5Al(Si 3Al)O 10(OH) 8 | 2/m | C2/m |
| Sudoite | Mg 2(Al,Fe) 3Si 3AlO 10(OH) 8 | 2/m | C2/m |
According toDana Classification System, cookeite is found in the phyllosilicate class (class 71), whose silicate layers are formed by six-membered rings with alternating 2:1 layers (two layers of T tetrahedra around a layer of O octahedra) and 1:1 layers (isolated layer of octahedra) (71.04), and more precisely in the chlorite group (71.04.01).
Cookeite generally crystallizes in the monocliniccrystal system. Itsspace group can beC2,[7]Cc[8] (monoclinic) orC1[9] (triclinic).
Itsstructure consists of a stack of layers containingmetallic elements and aluminosilicate layers. Thecoordination polyhedron of the metallic elements is anoctahedron, whose vertices are O2-anions or hydroxyl (OH)− groups. The aluminosilicate layers contain an octahedrally coordinated aluminum layer and two aluminosilicate layers formed by six-membered (Si,Al)6O18 rings of (Si,Al)O4tetrahedra. The layers are connected byhydrogen bonds.[10]
There are two types of octahedral layers, denoted O and O', which differ in their degree of filling. Cookeites belong to the "di, trioctahedral" chlorites, i.e. they possess:
The O layer contains the metal cations Al3+ and Li+. The distribution of these cations is not ordered in the structure: octahedral sites can host either Al3+ or Li+, but the occupation of the sites by these cations varies fromcell to cell in a non-periodic fashion. For this reason, octahedral sites are referred to as "mixed occupancy" sites. The occupancy of a site by different chemical species is described by its occupancy percentages, i.e. by theprobability of finding a certain chemical species there. For example, the trioctahedral O layer of r-cookeite shown above has three different sites,[nb 1] two of which are predominantly occupied by aluminum (orange octahedra) and the third by lithium (green octahedra). Similarly, the tetrahedral sites of the six-membered (Si,Al)6O18 rings are of mixed silicon and aluminum occupancy (yellow in the figure).
The structure of cookeite can be seen as an alternating stack ofbrucite-type layers and talc-type layers.[10] Indeed, brucite Mg(OH)2 consists of Mg3OH6[11] layers, and talc Mg3(Si4O10)(OH)2 consists of Mg2O4(OH)2Si8O12 layers.[12] In cookeite, Li+ and Al3+ cations take the place of Mg2+ cations in brucite-type layers (O layers) andtalc (O' layers).
The stacking of layers is not identical in all cookeites: there are several polytypes, distinguished by the length of the stacking period (lattice parameterc for monoclinic cookeites).
Cookeite "r" is a rare lithium-rich cookeite with the formula Al2(Al2Li)(Si3,04Al0,96)O10(OH)8. It crystallizes in the space groupCc, with Z=4 form units per conventional cell.[8] Its cell parameters areɑ= 5,158Å,b = 8,940Å,c = 28,498Å and β = 96,6° (unit cell volume V = 1 305,41Å3) and itsvolumetric mass density is 2,66g/cm3.
Its structure consists of an alternating stack of two types of layers, noted O and T-O'-T, parallel to the plane (ɑ,b).
The O layers, with a composition LiAl2(OH)6+, are made up of octahedrons (Al,Li)(OH)6 connected by their edges. All octahedra are of mixed aluminum and lithium occupancy. O-layer cations are distributed over three non-equivalent sites by symmetry. Two-thirds of the sites are preferentially occupied by Al3+ à 91% (orange octahedrons in the figure opposite), a third of the sites contain 82% of Li+ (green octahedra). The average (Al,Li)-OHbond length is 1.95 Å for octahedra containing predominantly aluminum and 2.11 Å for the others.[8]
The T-O'-T layers, with a composition Al2O4(OH)2Si8O12, are made up of an O' layer of octahedrons AlO4(OH)2 containing exclusively aluminium, surrounded by two T layers of tetrahedrons (Si,Al)4O10, structured in the form of six-membered rings (Si,Al)6O18 in which the tetrahedrons (Si,Al)O4 layers have a mixed occupancy of silicon and aluminum. The Al3+ cations in the O' layers are symmetrically distributed over two non-equivalent sites, with an average Al-O bond length of 1.92 Å. The cations (Si4+,Al3+) layers are distributed over four non-equivalent sites, with an average (Si,Al)-O bond length of 1.66 Å. There are two T-O'-T layers in the r-cookeite: the first is located at the edge of the cell, around the (x, y, z=0) coordinate plane, and the second is located in the center of the cell, around the (x, y, z=1/2)[nb 2] coordinate plane. These two layers are identical and equivalent through the translatory mirror c with coordinates (x, y, z=1/4).[13][nb 3] Since the O' layer has only one vacant site in the cell, when the layers are stacked, the vacant sites of the two layers are shifted in the (a,b).
A cookeite with the formula (Al1,85Fe0,13)(Li0,65Al1,96)(Si3,4Al0,6)O10,35(OH)7,65 from the Djalairbauxite deposit inCentral Asia has been described in triclinic space groupC1 (Z = 2 form units per cell), with cell parameters = 5.14 Å, = 8.90 Å, = 14.15 Å, α = 90.55°, β = 96.2° and γ = 90° (cell volume V = 643.49Å3). It has a volumetric mass density of 2,69g/cm3. Its structure is noted as IIa in the nomenclature of chlorite polytypes.[9]
The cell parameter of cookeite IIa is half that of r-cookeite: the difference between these two structures is due to the stacking of the O and T-O'-T layers. Within the layers themselves, there is no notable structural difference between this cookeite and the r-cookeite. However, the dioctahedral O' layers of cookeite IIa are all identical and ordered so as to have the vacant sites one above the other in the stacking direction of the layers, whereas in r-cookeite, due to the translatory mirror c, the vacant sites of the O' layers do not overlap.
Note: there are two space groups in the triclinic system:P1. The symmetry of this cookeite isP1; its description in theunconventional space groupC1, inducing an artificially doubled cell in the (ɑ,b) plane with respect to the primitive conventional cell, makes it easier to compare its structure with that of monoclinic cookeites.
Cookeite is often a product of the hydrothermal alteration of lithium-bearing minerals, such aslepidolite or certaintourmalines, inpegmatites,[5][14] and can also occur inhydrothermal veins in the primary state.
It is often associated with the following minerals:albite,lepidolite,microcline,petalite,quartz,spodumene and tourmaline.
Cookeite is a product of silicate alteration. In low-grade metamorphic zones, it is associated withpyrophyllite. In high-grade metamorphic zones, it is formed mainly by the alteration ofkyanite.
A study of samples collected in theArdlethanstanniferous field in Australia showed that cookeite forms in the porous interstices of graniticbreccias containing quartz,sulfides (such as pyrite),cassiterite, tourmaline, and fluorite.[23] It occurs at relatively low temperatures (between 150 °C and 200 °C) under hydrothermal conditions, after other minerals have formed in the breccia. The lithium in cookeite is the result of hydrothermal transport of magmatic fluids.
Pressure seems to have the greatest influence on the degree of crystallinity and composition of the cookeite. At low pressures, the stacking of layers is not very regular and the cookeite may contain many substitutional impurities. At higher pressures (above 10 kbar), the structure is more ordered, resulting in a higher degree of crystallinity and purer cookeite.[24] However, this direct relationship between pressure and structure has been called into question by the discovery of several samples of different crystallinity in the same sample from a low-pressure zone.[25] Cookeites from high pressure always exhibit a high degree of crystallinity, but ordered cookeites can also be found at low pressure. The low-crystallinity crystals assumed to be characteristic of low pressures simply haven't yet reached thethermodynamic equilibrium of ordered crystals, due to other factors such as deformation of the medium or the chemical environment.
