 | |
| General information | |
|---|---|
| Common manufacturer | |
| Max.CPUclock rate | to 300 MHz |
| Architecture and classification | |
| Application | Embedded systems |
| Instruction set | ModifiedMotorola 68000 family |
| Physical specifications | |
| Cores |
|
| History | |
| Predecessor | Motorola 68060 |
TheNXP ColdFire is amicroprocessor that derives from theMotorola 68000 family architecture, manufactured forembedded systems development byNXP Semiconductors. It was formerly manufactured byFreescale Semiconductor (formerly the semiconductor division ofMotorola) which merged with NXP in 2015.
The ColdFire instruction set is "assembly source" compatible (by means of translation software available from the vendor) and not entirely object code compatible with the68000. When compared to classic 68k hardware, the instruction set differs mainly in that it no longer has support for thebinary-coded decimal (BCD) packed data format; it removes a number of other, less used instructions; and most instructions that are kept support feweraddressing modes. Also,floating point intermediates are 64 bits and not 80 bits as in the68881 and 68882coprocessors. The instructions are only 16, 32, or 48 bits long, a simplification compared to the68000 series.
In February 1999, theμClinux project'sLinux kernel was ported to two ColdFire processors (MCF5206 and MCF5307).[1] In 2006, theDebian project was looking into making its m68k port compatible with the ColdFires,[2] as there are ColdFire models that can be clocked as high as 300 MHz. This is much faster than the68060, which can officially reach 75 MHz[3] and can be overclocked to 110 MHz.Stallion Technologies ePipe,[4]Secure Computing SnapGear[5]security appliances, andArcturus Networks's System on Module products[6] are based on ColdFire processors. There are ColdFireLinux-basedsingle-board computers (SBC) withEthernet andCompactFlash as small as 23×55 mm or 45×45 mm[7] or based on CompactFlash (37×43 mm) itself.[8] ColdFire based products have even been deployed to theInternational Space Station as an electronic nose project.[9][10]
There are five generations or versions of the ColdFire available from Freescale:
There is also the Fido 1100, a microcontroller launched in 2007 aimed at predictable embedded control systems such asIndustrial Ethernet applications using the 68k/CPU32 instruction set. However, Fido has its own unique architecture and shares the instruction set with 68k only.[11]
In November 2006, Freescale announced that ColdFire microprocessor cores were available for license as semiconductor Intellectual Property through their IP licensing and support partner IPextreme Inc.[12][13] ColdFire v1 core is now available under Free license (and no per use royalty) forAltera Cyclone-III FPGA's.[14][15]
In September 2007, Freescale launched the 32-bit Flexis microcontroller family with a ColdFire CPU core.[16]
In June 2010, Freescale announced the ColdFire+ line, which is a ColdFire V1 core using a 90 nm TFS technology.[17]
In 2010, Freescale also launched Kinetis, anARM-based product line, leading some industry observers[18] to speculate about the future of the ColdFire range, given that Freescale would have several competing CPU ranges.