Asemi orfull-automaticfirearm which is said to fire from aclosed bolt orclosed breech is one where, when ready to fire, a round is in thechamber and thebolt and working parts are forwardin battery. When the trigger is pulled, thefiring pin or striker fires the round; the action is cycled by the energy of the shot, sending the bolt to the rear, which extracts and ejects the emptycartridge case; and the bolt goes forward, feeding a fresh round from themagazine into the chamber, ready for the next shot.

WhenWorld War I era machine guns were being tried for use on aircraft, theLewis gun was found not to be usable with agun synchronizer for forward firing through the propeller, due to its firing cycle starting with anopen bolt. Maxim style arms fired with a cycle starting with a closed bolt, and since the bullet firing from the gun started the firing cycle, it was much easier to set the synchronizer to trigger the gun only when the propeller's blade was not directly in front of the gun's muzzle. These included:

• Vickers machine gun
• Both the rectangular-receiverlMG 08^[1] and lightened-receiver LMG 08/15Spandau gun, andParabellum LMG 14 gun
• Improvements introduced by Swedish armaments designer Carl Gustave Swebilius to the AmericanM1895 Colt–Browning machine gun for aircraft use, creating theM1917 and M1918 Marlin-Rockwell machine guns for theUSAAS

This sectionneeds additional citations forverification. Please helpimprove this article byadding citations to reliable sources in this section. Unsourced material may be challenged and removed.(December 2016) (Learn how and when to remove this message)

A closed bolt design has both advantages and disadvantages when compared to anopen bolt design:

• More accurate for the first round and for semi-automatic fire:
  • No movement of heavy working parts prior to firing to potentially inhibit accuracy.
  • Round sits consistently in the chamber.
  • Potentially shorter delay between operator pulling the trigger and round being fired (also known as lock time).
• Cleaner operation – less potential for dust and other foreign debris to enter the gun, since the action remains closed unless the weapon is firing.
• Action can be locked forward to further reduce noise in asuppressed weapon.
• Can carry an additional round in the chamber, increasing ammunition capacity by one round beyond themagazine's maximum limit.

• More complicated and expensive to manufacture.
• Less heatdissipation from closed chamber (increased danger ofcooking off)
• The extra round in the chamber can be a safety hazard, as even when the magazine is removed, the round in the chamber will still be ready to fire, and must be manually ejected.

Closed-bolt designs are often used inrifles. The improved accuracy of closed-bolt weapons is more desirable, while the poorer heat dissipation is less of an issue for slower-firing weapons. In contrast, open-bolt designs are more often used in automatic weapons, such asmachine guns. For fast-firing automatic weapons, heat will rapidly build up from sustained firing, but accuracy is of less importance. Thus, the improved heat dissipation of open-bolt designs is generally more desirable in automatic weapons.

Examples of closed-bolt firearms include:

Examples of mixed mode firearms (capable of operating from either an open bolt or closed bolt) include:

• ArmaLite AR-100 - AR-101 and AR-102
• CETME Model A
• FG 42
• FN SCAR - Heat Adaptive Modular Rifle
• LWRC Infantry Automatic Rifle - M6A4
• M1941 Johnson machine gun
• Dror light machine gun

• Action (firearms)
• Out-of-battery
• List of firearm terminology
• List of established military terms

• How Does it Work: Open Bolt vs Closed Bolt FirearmsArchived 2023-04-10 at theWayback Machine

• Firearm actions
• Firearm terminology

• Articles with short description
• Short description is different from Wikidata
• Articles needing additional references from December 2016
• All articles needing additional references
• Webarchive template wayback links