.jpg) | |
| Function | Orbitallaunch vehicle |
|---|---|
| Manufacturer | Instituto Nacional de Técnica Aeroespacial (INTA) |
| Country of origin | Spain |
| Size | |
| Height | 18.25 m (59.9 ft) |
| Diameter | 1.00 m (3.28 ft) |
| Mass | 15,035 kg (33,147 lb) |
| Stages | 3 |
| Capacity | |
| Payload toLEO | |
| Mass | 140 kg (310 lb) |
| Launch history | |
| Status | Canceled |
| Launch sites | El Hierro |
| First stage –Castor 4B | |
| Powered by | 1Solid |
| Maximum thrust | 429 kN (96,000 lbf) |
| Burn time | 61 sec |
| Propellant | AP /HTPB |
| Second stage – Deneb-F | |
| Powered by | 1Solid |
| Maximum thrust | 167.9 kN (37,700 lbf) |
| Burn time | 35.6 sec |
| Propellant | Solid |
| Third stage – Mizar-B | |
| Powered by | 1Solid |
| Maximum thrust | 50.29 kN (11,310 lbf) |
| Burn time | 33.8 sec |
| Propellant | Solid |
Capricornio was a Spanishsatellitelaunch vehicle developed by theInstituto Nacional de Técnica Aeroespacial (INTA) in the 1990s.[1] It was intended to be Spain's first launcher.[2]
Work on Capricornio started in 1990, INTA choosing to pursue a three-stage configuration. In concept, the launcher was to be a low-cost solution capable of placing up to 70 kg payloads, such asmicrosatellites, into 600 kmpolar orbits, or alternatively 60 to 140 kg payloads intolow Earth orbit. In conjunction, INTA sought to establish theEl Hierro Launch Centre from which it envisioned Capricornio being launched on a commercial basis.
There were allegations that aspects of Capricornio's design, such as its guidance system, had been derived fromCondor missile developed byArgentina during the 1980s.[3]
The Capricornio programme involved three phases, starting with the development of suitablerocket motors, progressing to the use of Capricornio's second and third stages together as theArgo sounding rocket, and finally the flight of the fully-assembled rocket itself. The first test launch of Capricornio, which was at one point scheduled to take place sometime in 1999, was never conducted as the programme was put on hold one year prior. The Capricornio program was formally cancelled during 2000 amid alleged foreign political pressure, competition from other launchers, and INTA's desire to focus on other endeavours.
Studies into what would later become Capricornio commenced at the Spanish aerospace firmInstituto Nacional de Técnica Aeroespacial (INTA) during 1990.[4] The initiative built on ideas that the company had been considering as early as 1961. Multiple different configurations were examined prior to the selection of a three-stage launch vehicle.[4] This vehicle, weighing 14,000 kg and standing at a height of 11 meters, was deemed sufficient for the launching ofmicrosatellites weighing between 50 and 100 kg intolow Earth orbit (LEO). Throughout the 1990s, INTA worked on the programme, which received the nameCapricornio, intending for the launcher to be operated as a purely civilian initiative that would be operated on a commercial basis.[4][2][3]
The programme was supported by several parallel endeavours by INTA. One such effort, for which INTA collaborated with both theINSA and the American aerospace firmLockheed Martin, examined the prospective development of a suitable launch range for small satellite launchers in theCanary Islands, now known as theEl Hierro Launch Centre.[5][6][4] The Capricornio programme encountered some controversy over allegations that it could be adapted into amedium-range ballistic missile and used for military purposes; furthermore, that the rocket had incorporated elements of theArgentinianCondor missile. Spain was heavily involved in the destruction of these missiles, and it was speculated that this arrangement led to Spain obtaining their guidance apparatus; however, Argentinian officials disputed these claims, stating that the guidance systems had been removed prior to even arriving in Spain.[3]
The first phase of activity on the Capricornio programme centred upon the development of solid motors, which included the use of both theINTA-100 andINTA-300sounding rockets from theEl Arenosillo test range in southern Spain. During June 1997, it was announced that the American manufacturerThiokol was to supply the Castor 4B solid rocket motor that would power the first stage of Capricornio.[2][7] For the second phase of the programme, it was intended to use both the second and third stages of Capricornio as theArgo sounding rocket; it was originally planned to fly sometime in late 1998 or early 1999.[8]
The third phase of the Capricornio programme involved all the work necessary to achieve the first launch of the complete Capricornio rocket. At one point, it had been intended for this first flight to be conducted from El Hierro.[4] Capricornio was reportedly scheduled to take flight sometime in late 1999 or 2000, and was to have carried a pair of small satellites:Nanosat 01 (developed by thePolytechnic University of Madrid) andVenus (Polytechnic University of Madrid and other universities in Mexico and Argentina).[2][1]
However, Capricornio would never actually fly. Development of the launcher had been formally suspended during 1998, one year prior to the planned launch; one claimed reason for this outcome was that INTA had decided to redirect its resources into other endeavours.[4] The development of Capricornio had been opposed by the United States, and thus it is suspected that the programme had been shelved for political reasons.[3] The aerospace author Brian Harvey, speculated the competition fromArianespace'sVega launcher had made the role of Capricornio less clear.[9]
Three-stage solid propellant launcher. Overall length of 18.25 m, body diameter of 1.0 m and weighs 15,035 kg at launch.
