 | This article includes a list ofgeneral references, butit lacks sufficient correspondinginline citations. Please help toimprove this article byintroducing more precise citations.(April 2009) (Learn how and when to remove this message) |
| CAR-15 XM177 Commando | |
|---|---|
 GAU-5/A, USAF version of the XM177 | |
| Type | Assault rifle Carbine |
| Place of origin | United States |
| Service history | |
| In service |
|
| Wars | Vietnam War Laotian Civil War Cambodian Civil War Sino-Vietnamese War Lebanese Civil War Operation Eagle Claw 1982 Lebanon war Salvadoran Civil War Guatemalan Civil War United States invasion of Grenada United States invasion of Panama Gulf War |
| Production history | |
| Manufacturer | Colt Defense |
| Variants | XM177 (R610 in US Army service) XM177E1 (R609 in US Army service) XM177E2 (R629 in US Army service) GAU-5/A (R609 in US Air Force service) GAU-5A/A (R649 in US Air Force service) |
| Specifications | |
| Mass | 5.35 lb (2.43 kg) |
| Length | 31 in (790 mm) (XM177E1, stock extended) 28.3 in (720 mm) (XM177E1, stock retracted) |
| Barrel length | 10 in (250 mm) (XM177E1) 11.5 in (290 mm) (XM177E2) |
| Cartridge | 5.56×45mm NATO,.223 Remington |
| Action | Gas-operated,closedrotating bolt,Stoner bolt and carrier piston |
| Muzzle velocity | 2,650 ft/s (810 m/s) (XM177E1) 2,750 ft/s (840 m/s) (XM177E2) |
| Effective firing range | 400 m (440 yd) |
| Feed system | 30-roundbox magazine or otherSTANAG magazines. |
| Sights | Iron sights or various optics |
TheColt Automatic Rifle-15 orCAR-15 is a family ofM16 rifle–based firearms marketed byColt in the 1960s and early 1970s. However, the term "CAR-15" is most commonly associated with theColt Commando (AKA:XM177); theseselect-fire carbines have ultrashort 10.5-inch (270 mm) and 11.5-inch (290 mm) barrels with over-sized flash suppressors.
The CAR-15 name was an attempt to re-associate the AR-15 name with Colt, since the “AR” designation stood for “Armalite Rifle", the original manufacturer of theArmaLite AR-15. Colt later abandoned the CAR-15 concept, but continued to make carbine variations, using the "M16" brand forselect-fire models and the "Colt AR-15" brand forsemi-automatic models. However, in present usage, "CAR-15" is the generic name for allcarbine-length variants made before theM4 carbine.
AfterColt's Patent Firearms Manufacturing Company purchase of the rights and intellectual property to the AR-10 and AR-15 rifles fromArmalite in late 1959, Colt embarked on a research and development program to create variations of the AR platform that evolved into the CAR-15 family of firearms. The focus of the CAR-15 R&D was to develop five different variants of the existing AR-15 in addition to a 40mm grenade launcher. The five firearms developed were a submachine gun (SMG), a carbine, a heavy barrel magazine-fed squad automatic weapon (SAW), a belt-fed machine gun, and a compact survival rifle. Only the SMG generated any interest with the U.S. Army and "Aside from limited purchases of 100-150 M-1 heavy assault rifles for trials during the upcomingSAWS program, the military was cool to most of Colt's CAR-15 Military Weapons System, and only a handful of carbines, M-2 belt-fed assault rifles and survival rifles were ever produced. However, the short-barreled submachine gun and the 40mm grenade launcher attachment did undergo considerable further development."[1]
The CAR-15 program started in earnest in 1964 with samples of the SMGModel 607 being submitted to the U.S. Army for evaluation. Starting in May 1965, Colt attempted to market theM16 rifle and its variants developed under the CAR-15 program to commercial markets and markets outside the United States as amodular weapon system. By using various upper assemblies,buttstocks, andpistol grips, the weapon could be configured as anassault rifle, acarbine, asubmachine gun, anopen-boltsquad automatic weapon, a belt-fedlight machine gun, or a survival rifle. There was a second belt-fed machine gun developed under the CAR-15 program called the CMG-1, CMG-2, and CMG-3 in 7.62 NATO that was not based on the existing AR-15/M16 design. However, the U.S. military only made significant purchases of the existing M16 rifle and the SMG model, later called the Commando versions, so Colt abandoned the CAR-15 family concept. The "CAR-15 Rifle" was already identified by most users as the M16 rifle, and "CAR-15" was similarly associated with the short-barreled Colt Submachine Gun and Commando models. Because of that, the term "CAR-15" has been used to describe any M16-based carbine, even if the particular weapon is not officially named this.
Beginning in 1961 under ARPA's Project Agile, Colt provided approximately 1,000 AR-15s for evaluation to the U.S. Government in southeast Asia. Colt was eventually awarded their first contract to supply the U.S. Army and U.S. Air Force with the M16 in November, 1963. TheModel 603 CAR-15 Rifle, adopted initially by theUnited States Army as the XM16E1 and then later as the M16A1, and theModel 604 CAR-15 Rifle, adopted by theUnited States Air Force as the M16, formed the core of the CAR-15 family. However, the United States military had already committed to purchases before Colt created the concept of the CAR-15 weapons system. The principal difference between theModel 603 andModel 604 is that the former has aforward assist, allowing a user to manually close a stuckbolt.
The CAR-15 Heavy Assault Rifle M1 was a heavy-barreled version of the standard CAR-15 with a bipod attachment, intended for use as a Squad Automatic Weapon (SAW). It was designed to feed from the same detachable box magazine used for the M16. Approximately 100-150 were produced by Colt for evaluation by the U.S. Army during theSAWS program in 1965.[1] Colt continued attempts to market the HBAR M16A1 as theModel 621 through the late 1970s without success and only a few dozen were manufactured. Colt did eventually produce a heavy barrel civilian market semi-automatic AR-15 beginning in the late 1980s based on the M16A2 called the AR-15 HBAR that was a commercial success.
The CAR-15 Heavy Assault Rifle M2 was a belt-fed conversion of the standard CAR-15, with a heavy barrel and bipod attachment. It was made in prototype form only and saw no sales. TheCAR-15 Heavy Assault Rifle M2 was not related to the CMG-1, CMG-2, or CMG-3 belt fed machine guns.
TheModel 605 CAR-15Carbine was a shortened version of Colt's M16E1/M16A1 for situations where longer weapons could be unwieldy, such as inside armored vehicles, ships/boats, orhelicopters. There were only a very small number of known prototypes of the carbine made sometime after the 1963 award of the first contract to Colt for the delivery of the M16 and M16E1. The first prototype was essentially an M16E1/M16A1 rifle with 5 inches of the barrel removed resulting is a barrel 15 inches (381 mm) in length, so that it ended just forward of the front sight base. Because of the shorter barrel and no space to attach a bayonet, thebayonet mounting lugs removed. Due to the shortened barrel with the gas port intersecting the barrel bore near the muzzle, the gas port diameter was opened up to match the internal diameter of the gas tube at 0.110 inches.[1]
A second prototype used a custom profile 16-inch (410 mm) barrel with the gas port and front sight base/gas block moved back approximately 2.5 inches to improve reliability. A standard M16 handguard had 2.5 inches cut off the back to fit the shortened barrel/gas system, and a custom adapter fabricated to retain the modified handguard in the existing retainer ring surrounding the barrel nut. As an added benefit from the relocated front sight/gas block a bayonet was able to be fitted. This gas system is arguably the first use of what is called today as a "mid-length" gas system since it falls between the 12 in gas system of the rifle and the 7 inch gas system used in the SMG variants.[1]
Because of the issues with reliable cycling caused by the shortened barrel, Colt experimented with buffers and low mass bolt carriers during the development of the carbine and SMG versions of the CAR-15. The only two known versions of theModel 605 prototypes used a modified lower receiver assembly that appears to use an early M16Model 603 type forging without the "fence" surrounding the magazine release button. The modified lower receiver incorporated a four-position selector switch (developed by Foster Sturtevant in December 1966) so that a user could select safe, semi-automatic, three-round burst, or full automatic modes of fire. Unlike the standard three-position group, the four-position group went from (going clockwise from the 9 o'clock position) safe, fully automatic, semi-automatic and finally burst. The selector itself had 360 degrees of motion, and could be moved either clockwise or counterclockwise, unlike with standard groups. Instead of three-round burst, the burst cam could be modified to two-round or six-round burst.[1]
TheModel 605 prototypes used what appeared to be an M16E1/M16A1 upper receiver forging but with the forward assist deleted and the hump mostly machined off. Both prototypes used the standard rifle-length buttstock.[1]
Despite the failure of Colt's CAR-15 program to produce a successful carbine variant, in the mid 1990s Bushmaster manufactured a similar firearm based on the semi-automatic civilian market M16A2. The Bushmaster XM-15 Dissipatior used a 16 inch barrel (for NFA compliance) and standard rifle length handguard and front sight location, but differed significantly in that it used a M4 length gas system with a gas block separate from the front sight block hidden under the handguard. In the early 2020s, Brownells manufactured their BRN-605, a "retro-rifle" clone of the first prototype CAR-15 carbine but used a 16 inch barrel instead of 15 inch (for NFA compliance), but the Brownells clone used the same rifle length gas system as the firstModel 605 prototype.
As early as 1964,United States Navy SEALs were testing prototypes of what would become theModel 607 SMG.[2] Colt's manufactured approximately 50 of these for evaluation. Most were issued to Navy SEALs and Army Special Forces, though some were also given to Army K-9 units.
In 1965, Colt introduced theModel 607 Submachine Gun. This was the first AR-15 made with a retractable buttstock and was as a product of the development of Colt's SMG prototypes. Its overall length was only 26 inches (660 mm) with the buttstock collapsed. The retractable buttstock resembled a shortened version of the fixed buttstock, but a two-position latch recessed in the back allowed it to be extended and locked into position, increasing the length of pull by 2.7 inches (69 mm). The barrel is too short to mount a bayonet, so the SMG had no bayonet lug. It was a compact weapon for use byspecial forces and vehicle crewmen. Thedictionary definition ofsubmachine gun is an automatic firearm that fires pistol-caliber cartridges. However, manufacturers such asColt,Heckler & Koch, andZastava Arms have referred to compact carbines as submachine guns, to emphasize their short length and to differentiate them from longer carbines.
TheModel 607 never went into production, but the limited success during the prototype development resulted in further interest by the U.S. Army and U.S Air Force. The first models were made with M16 receivers without forward assists and with shortened pistol grips from the Survival Rifle (see below). The laterModel 607A was made with XM16E1 receiver with forward assist and standard pistol grip. The handguard was made from full-length rifle handguard by cutting it in half and using either the fore or aft pair, after machining the ends to fit the slip ring and handguard cap.
Because of the short barrel, the CAR-15 SMGs suffered from a loud and bright muzzle blast, and a number of muzzle devices were developed to reduce this. The SMGs were initially fitted with the standard M16 rifle's "duckbill" or three-prong flash hiders, which did not alleviate the problem. In September 1966, Colt developed a 3.5-inch (89 mm) long moderator that lessened the noise and muzzle flash, which also increased the weapon's reliability by increasing the amount of back pressure. However, the moderator created its own problems, such as heavy bore fouling and causing tracer bullets to wildly yaw. A 4.25-inch (108 mm) long moderator with six slots and an expansion chamber, which further reduced noise and flash, replaced the previous muzzle device and became standard for the SMG and the Commando series, but fouling and tracer problems persisted.[3]
The Colt Commando was an outgrowth of the CAR-15 Military Weapons System, specifically theModel 607, as a result of interest by the U.S. Army for a fully developed weapon. It was introduced by Colt in 1966 in response to the US military's desire for a shorter M16 and without theModel 607 SMG's inadequacies. Colt engineer Rob Roy designed a simpler two-position telescoping tubular aluminum buttstock to replace the complicated extending triangular version. The fragile and ad hoc triangular handguards were replaced by reinforced round handguards. Each half of the round handguard is identical, simplifying logistics by not requiring a top/bottom or left/right pair. TheModel 609 Commando has a forward assist, while theModel 610 Commando does not. AModel 610B with a four-position selector was available, but not used by the U.S. military. All versions are equipped with the 4.25-inch (108 mm) long moderator.[4]
The XM177 uses a unique flash suppressor sometimes called a flash or sound moderator for its 10-inch (250 mm) barrel. This device is 4.2 inches (110 mm) long and was designed primarily as a counterbalance measure as the shorter barrel makes the weapon unwieldy.[5] This device reduces flash signature greatly and sound signature slightly, making the normally louder short barreled carbine sound like a longer barreled M16A1.[6] Although it has no internal baffles and does not completely reduce the sound signature to subsonic levels, because it alters the sound level of the weapon, the US Bureau of Alcohol Tobacco Firearms and Explosives has declared this muzzle device to be a sound suppressor and regulates its civilian purchase in the United States.[6]
TheModel 610 was classified as theXM177[7] but adopted by the Air Force as theGAU-5/A Submachine Gun (GA denoting an automatic gun and U a complete unit rather than a parts kit: the popular "gun aircraft unit" and "gun automatic unit" explanations arebackronyms[8]). The Army purchased 2,815Model 609 CAR-15 Commandos on June 28, 1966, which were officially designated Submachine Gun, 5.56 mm,XM177E1.[7] As part of the contract, Colt was supposed to supply each XM177E1s with seven 30-round magazines, but Colt was unable to build a reliable 30-round curved magazine that would fit in the M16 magazine well, so most XM177E1s were shipped with 20-round magazines. The exception was5th Special Forces Group, who received a total of four early 30-round magazines. Colt completed delivery of the purchased XM177E1s in March 1967, but the 30 round magazines did not become available until November 1967.
In 1967, in response to field testing, Colt lengthened the Commando's barrel from 10 to 11.5 inches (254 to 292 mm). The increased length reduced noise and muzzle flash, and allowed fitting of the ColtXM148 grenade launcher. A metal boss was added to the moderator for mounting of the XM148 andrifle grenades.[9] The chambers were chrome-plated. The Commandos with the longer barrels were called theModel 629 andModel 649. TheModel 629 Commando has a forward assist; theModel 649 Commando does not.
In April 1967, the Army purchased 510Model 629 Commandos for use by troops assigned to theMilitary Assistance Command, Vietnam Studies and Observations Group (MACV-SOG), and designated themXM177E2.[7] Delivery was completed by the end of September 1967. The Air Force adopted a similar model without the forward assist feature as theGAU-5A/A. Sources debate whether or not this was a ColtModel 630 orModel 649.[7] According toJohn Plaster and other sources, the lack of 30-round magazines continued to be problematic and SOG operators resorted to pooling their personal resources and purchasing the larger capacity magazines on the civilian U.S. market.[10] Problems with range, accuracy, barrel fouling, and usage of tracer bullets continued to plague the XM177 series, but Colt estimated that it would take a six-month $400,000 program to do a complete ballistic and kinematic study. There were also recommendations for a 29-month $635,000 research and development program. Both recommendations were declined by the U.S. military as American ground force involvement in the Vietnam War was gradually winding down. Production of the CAR-15 Commando ended in 1970.
TheModel 608 CAR-15 Survival Rifle was meant for use by downed aircrew. Because of the CAR-15's modular design, the Survival Rifle could be broken down into two subassemblies and stowed with four 20-round magazines in a pilot's seat pack. Resembling a Colt Commando, it also has a 10-inch (250 mm) barrel and is 29 inches (740 mm) in overall length when assembled. The Survival Rifle used a fixed tubular plastic-coated aluminum buttstock and a round handguard that were not used on the other CAR-15 versions, and did not have either a forward assist or a bayonet lug. The pistol grip was chopped down, and the muzzle was equipped with either a conicalflash hider or the 3.5-inch (89 mm) long moderator. Around 10 of theModel 608 were known to be manufactured.
After the Vietnam War, Colt abandoned the CAR-15 Modular Weapon System concept, but continued to develop short barrel carbines. These were marketed as"M16s", while the civilian and law-enforcementsemi-automatic counterparts were marketed as"Colt AR-15s", though they were all commonly called CAR-15s.
In the early 1970s, Colt began development of an M16 carbine with a 14.5-inch (370 mm) long pencil barrel. The barrel length was compatible with the existing carbine-length gas system and allowed for the mounting of a standard M16 bayonet. Despite having a longer barrel, it is no longer than the Colt Commando, as the longer barrel did not require the long 4.5 inch moderator of the XM177 series, only the much shorter M16 birdcage-type flash hider. Colt labeled the M16 carbines theModel 651,652,653, or654, depending on whether or not it had a fixed or retractable buttstock, or a forward assist. Only theModel 653 M16A1 carbine, with retractable buttstock and forward assist would be purchased in significant numbers by the U.S. military. TheMalaysian Armed Forces and theArmed Forces of the Philippines, purchased Model 653s in small numbers for special operations forces or security forces.
.jpg)
The GUU-5/P was a result of United States Air Force making ad-hoc upgrades to its GAU-5 series. The barrels and flash suppressor were replaced with the longer 14.5-inch (370 mm) barrel with a 1-in-12 twist, but the weapons retained their original designations. With the change to M855 cartridges, they either received 1-in-7 twist barrel or complete upper receiver assembly replacements. The GAU-5s markings were also removed and the weapons were re-stampedGUU-5/P. These were used by the BritishSpecial Air Service during theFalklands War.[11]
In the early 1980s, at the request of the United States Marine Corps,[12] Colt upgraded the M16A1 rifle, resulting in the M16A2 rifle. Among the major changes were a reinforced lower receiver, a case deflector, a birdcage flash suppressor redesigned to prevent downward blast, and a barrel with a faster 1-in-7 twist. The faster barrel was necessitated by the switch from the 55-grain M193 bullet to the 62-grain M855 bullet. The M16A2 rifle's barrel was also thicker for the portion in front of the handguard. Colt incorporated these changes into its carbines, which it called M16A2 carbines. TheModel 723 M16A2 carbine used the iron sights of the M16A1, but had a case deflector. The barrel had a 1-in-7 twist, but the thinner profile of the older M16A1 carbine's barrel. As with the Model 653, the United States military made small purchases of the Model 723 for its special operation forces.[13] It was notably used byDelta Force operators from the late 1980s to the early 1990s.[14]
In 1983,Diemaco developed a carbine similar to the Model 723, theC8 carbine for use by theCanadian Forces. The original C8s were built by Colt as theModel 725. In 1984, the U.S. government asked Colt to develop a carbine with maximum commonality with the issue M16A2. Colt named the carbine as theXM4. The project would eventually culminate in the development and official adoption of theM4 carbine in 1994.
Though Colt has focused its attention on carbines with 14.5-inch (370 mm) barrels and rifles with 20-inch (510 mm) barrels, Colt continues to make carbines with 11.5 inches (290 mm) barrels, which it calls Commandos. Originally, Commandos were assembled from whatever spare parts were available, soModel 733 Commandos could have A1-style upper receivers with case deflectors or A2-style upper receivers, and M16A1-profile 1:7 or M16A2-profile 1:7 barrels. Depending on the specific models, Commandos may have had three-position fire control groups (safe/semi-automatic/three-round burst), or four-position having both full-automatic and burst. The modernModel 933 has a "flattop" receiver, with a removable carrying handle and aMIL-STD-1913 Picatinny rail, with semi-automatic and automatic fire. TheModel 935 Commando has the features of the Model 933, but has three-round burst fire instead of automatic. Though originally called the M16A2 Commando, Colt now markets them as theM4 Commando.[15]
The M4 Commando with its short 11.5-inch (290 mm) barrel suffers the same failings as its predecessors: a substantially lowermuzzle velocity and greater muzzle flash, in comparison to longer M16 rifles and carbines. The lower muzzle velocity can reduce carbines' wounding effects.[16] However,United States Marine Corps Force Reconnaissance personnel sometimes used M4 Commandos in place of theirM9 pistols.[17]United States Army Special Operations Command Groups also use M4 Commandos as self-defense weapons.United States Navy SEALs use the ultra-compactMk 18 Mod 0 with its 10.3-inch (260 mm) barrel in a similar role.
In 2019, a solution to give a personal firepower upgrade over the traditional sidearm for US aircrews inACESejection seat–equipped aircraft was to use commercially available AR-15 rifle parts including a specialshort quick-release barrel, collapsible stock, folding pistol-grip, and four magazines to fit inside the survival kit pan of the ejection seat. Major Gibson, an Air Force spokesperson, said, "This has driven the dimension of 16 × 14 × 3.5 inches." The Aircrew Self Defense Weapon is to be included in survival kits for A-10, B-1, B-2, B-52, F-15C, F-15E, F-16, and F-22 aircraft. The rifle is being built at U.S. Air Force Gunsmith Shop at Joint Base San Antonio-Lackland, Texas. 2,137 GAU-5A ASDWs are planned.[18][19]
.jpg)
%2c_checks_his_weapon_before_heading_out_to_a_target_area_during_jungle_warfare.jpg)
_12_man_the_firing_line_(CAR-15_crop).jpg)
