Barbettes are several types ofgun emplacement in terrestrial fortifications or on navalships.
In recent[when?] naval usage, a barbette is a protective circular armour support for a heavy gun turret. This evolved from earlier forms of gun protection that eventually led to thepre-dreadnought. The namebarbette ultimately comes fromfortification: it originally meant a raised platform or mound,[1] as in the French phraseen barbette, which refers to the practice of firing acannon over aparapet rather than through anembrasure in a fortification'scasemate. The former gives better angles of fire but less protection than the latter. Thedisappearing gun was a variation on the barbette gun; it consisted of a heavy gun on acarriage that would retract behind aparapet or into a gunpit for reloading. Barbettes were primarily used in coastal defences, but saw some use in a handful of warships, and some inland fortifications. The term is also used for certain aircraft gun mounts.
Shipboard barbettes were primarily used in armoured warships, starting in the 1860s during a period of intense experimentation with other mounting systems for heavy guns at sea. In these, gun barrels usually protruded over the barbette edge, so barbettes provided only partial protection, mainly for theammunition supply. Alternatives included the heavily-armouredgun turret and an armoured, fixedcentral gun battery. By the late 1880s, all three systems were replaced with a hybrid barbette-turret system that combined the benefits of both types. The armoured vertical tube that supported the new gun mount was referred to as a barbette.
Guns with restricted arcs of fire mounted in heavy bombers during World War II—such those in the tail of the aircraft, as opposed to fully revolving turrets—were also sometimes referred to as having barbette mounts, though usage of the term is primarily restricted to British publications. American authors generally refer to such mounts as tail guns or as tail gun turrets.
The use of barbette mountings originated in ground fortifications. The term originally referred to a raised platform on arampart for one or more guns, enabling them to be fired over aparapet.[2] This gave rise to the phraseen barbette, which referred to a gun placed to fire over a parapet, rather than through anembrasure, an opening in a fortification wall. While anen barbette emplacement offered wider arcs of fire, it also exposed the gun's crew to greater danger from hostile fire.[3] In addition, since the barbette position would be higher than acasemate position—that is, a gun firing through an embrasure—it would generally have a greater field of fire.
The American military theoristDennis Hart Mahan suggested that light guns, particularlyhowitzers, were best suited for barbette emplacements since they could fire explosiveshells and could be easily withdrawn when they came under enemy fire.[4] Fortifications in the 19th century typically employed both casemate and barbette emplacements. For example, the RussianConstantine Battery [ru] outsideSevastopol was equipped with 43 heavy guns in its seaward side during theCrimean War in the mid-1850s; of these, 27 were barbette mounted, with the rest in casemates.[5]
A modified version of the barbette type was thedisappearing gun, which placed a heavy gun on a carriage that retracted behind a parapet for reloading; this better protected the crew, and made the gun harder to target, since it was only visible while it was firing.[6] The type was usually used for coastal defence guns. As naval gun turrets improved to allow greater elevation and range, many disappearing guns, most of which were limited in elevation, were seen as obsolescent; with aircraft becoming prominent in the First World War, they were largely seen as obsolete. However, they remained in use through the early Second World War, at least by the United States, due to limited funding for replacement weapons between the wars.[7][8]
Later heavy coastal guns were often protected in hybrid installations, in wide casemates with cantilevered overhead cover partially covering a barbette orgunhouse mount.[9]
Following the introduction ofironclad warships in the early 1860s, naval designers grappled with the problem of mounting heavy guns in the most efficient way possible, beginning withbroadsidebox batteries and quickly moving to rotatinggun turrets, since these afforded the ability to fire directly ahead, which was deemed important due to the adoption oframming tactic after theBattle of Lissa in 1866. But early turrets were very heavy, which necessitated a lowfreeboard to reduce topweight and a corresponding tendency tocapsize.[10][11][12] By the 1870s, designers had shifted to the rotating barbette mount, which eschewed armor protection to reduce weight; this would permit the use of heavy guns in high-freeboard ships. This new type of vessel was referred to as abarbette ship, to differentiate them fromturret ships andcentral battery ships.[13][14]
In the late 1880s, the BritishRoyal Navy adopted a new mounting that combined the benefits of both kinds of mounts in theMajestic class. A heavily armoured, rotating gun house was added to the revolving platform, which kept the guns and their crews protected. The gun house was smaller and lighter than the old-style turrets, which still permitted placement higher in the ship and the corresponding benefits to stability and seakeeping. This innovation gradually became known simply as a turret, though the armored tube that held the turret substructure, which included the shell and propellant handling rooms and the ammunition hoists, was still referred to as a barbette. These ships were the prototype of the so-calledpre-dreadnought battleships, which proved to be broadly influential in all major navies over the next fifteen years.[15][16]
When applied to military aircraft, largely in aviation history books written by British historians[citation needed], a barbette is a position on anaircraft where a gun is in a mounting which has a restrictedarc of fire when compared to a turret, or which is remotely mounted away from the gunner. As such it is frequently used to describe thetail gunner position on bombers such as theBoeing B-17 Flying Fortress,[17] with American aviation books frequently describing the position as a tail gun turret,[18] or simply as a tail gun.[19]
The term "barbette" is also used by some, again primarily British historians, to describe a remotely aimed and operated gun turret emplacement[20] on almost any non-American military aircraft of World War II, but it isnot usable in a direct translation for the varying German language terms used onLuftwaffe aircraft of that era for such emplacements. As just one example, the GermanHeinkel He 177A heavy bomber had such a remotely operated twin-MG 131 machine gunFernbedienbare Drehlafette FDL 131Z(Z – "zwilling"/twin) powered forward dorsal gun turret, with the full translation of the German term comprising the prefix as "Remotely controlled rotating gun mount".[21] The term"lafette" in German actually refers to agun carriage of nearly any type, with its original use as being for the mounting design forbombard-style siege guns of the Middle Ages.
