 | |
| Company type | Subsidiary |
|---|---|
| Industry | Arms industry |
| Founded | 1954 (original company) 1996 (current company) |
| Headquarters | , U.S. |
| Products | Firearms and accessories |
Number of employees | 51–200 (est.) |
| Parent |
|
| Website | armalite |
ArmaLite, orArmalite, is an Americansmall arms engineering company, formed in the early 1950s inHollywood, California. Many of its products, as conceived by chief designerEugene Stoner, relied on unique foam-filledfiberglass butt/stock furniture and a composite barrel using a steel liner inside an aluminum sleeve, including the iconicAR-15/M16 family. While the original ArmaLite ceased doing business in the 1980s, the brand was revived in 1996, by Mark Westrom.
Originating as the light firearms division ofFairchild Engine and Airplane Corporation, ArmaLite was formally incorporated in 1954. Stoner's first design, the AR-1 Parasniper (dating from 1952),[1] was relatively unsuccessful. However, in 1956, when ArmaLite competed in a contest for an aircrew survival rifle, itsAR-5 andAR-7 designs were put into production and adopted by elements of the US military. In 1957, ArmaLite also competed for the contract for a new main US combat rifle, in the NATO standard 7.62 mm caliber, with itsAR-10. While that bid was unsuccessful, the rifle attracted the attention of bothColt and the Dutch companyArtillerie-Inrichtingen, both of which acquired licenses to manufacture the AR-10.
In 1962, Fairchild relinquished its interest in ArmaLite, which continued as an independent company.
TheAR-15, chambered for the new, lightweight, high velocity 5.56 mm round, included features of Stoner's previous designs. Under financial pressure, ArmaLite sold the entire rights to the AR-15 design to Colt, which quickly secured significant US military and law enforcement contracts for the weapon, beginning with theUSAF Security Forces (1962). A variant of the Colt product was adopted as the US Army's main combat rifle, from 1964, as the Rifle, Caliber 5.56 mm,M16. By the 1980s, it had also been adopted by the militaries of many US allies, especially withinNATO countries. The M16 remained the primary combat rifle of the US military until 2016. Furthermore, its replacements have often been derivatives of the M16 (e.g. theM4 carbine), or other ArmaLite and/or Eugene Stoner designs (e.g.M27–IAR).
ArmaLite had other brushes with success, especially with theAR-18 (also 5.56 mm). They were not enough to sustain the company and it ceased operations in the early 1980s.[2] The design rights and name were purchased in 1996 by Mark Westrom, who re-launched the company ArmaLite, Inc., headquartered inGeneseo, Illinois northwest ofPeoria.[1] In 2013, Westrom sold ArmaLite, Inc. to Strategic Armory Corps, which owns AWC Silencers, Surgeon Rifles, Nexus Ammo, andMcMillan Firearms. SAC was formed to acquire and combine market-leading companies within the firearms industry.[3] In 2014,3-gun champion Tommy Thacker was appointed president. In 2015, ArmaLite introduced 18 new products, including theAR-10 and the M-15 platform firearms. In mid-2018, ArmaLite moved toPhoenix. As of mid-2023 Strategic Armory Corps and its subsidiaries (including Armalite) relocated headquarters to be based out ofBryan/College Station, Texas.[4]
ArmaLite began as a small arms engineering concern founded by George Sullivan, the patent counsel forLockheed Corporation and funded byFairchild Engine and Airplane Corporation.[5] After leasing a small machine shop[6] at 6567Santa Monica Boulevard in Hollywood, Sullivan hired several employees and began work on a prototype for a lightweight survival rifle for use by downed aircrew.[5] On October 1, 1954, the company was incorporated as the ArmaLite Corporation, becoming a subsidiary of Fairchild.[5] With its limited capital and tiny machine shop, ArmaLite was never intended to be an arms manufacturer[5] but instead was focused on producing small arms concepts and designs to be sold or licensed to other manufacturers.[5] While testing the prototype of ArmaLite's survival rifle design at a local shooting range, Sullivan metEugene Stoner, a talented small arms inventor, whom Sullivan immediately hired to be ArmaLite's chief design engineer.[5] Stoner was aUS Marine inWorld War II and an expert with small arms. Since the early 1950s, he had worked various jobs while building gun prototypes in his spare time. At the time, ArmaLite Inc. was a small organization. As late as 1956, it had only nine employees, including Stoner.[5]
With Stoner as the chief design engineer, ArmaLite quickly released several innovative rifle ideas.[7] The first ArmaLite concept to be adopted for production was theAR-5, a survival rifle chambered for the.22 Hornet cartridge. The AR-5 was adopted by theU.S. Air Force as theMA-1 Survival Rifle.
A civilian survival weapon, theAR-7, was later introduced and chambered in.22 long rifle. The semi-automatic AR-7, like the AR-5, could be disassembled and the components stored in the buttstock. Primarily made of alloys, the AR-7 floats, whether assembled or stored, due to the design of the buttstock which is filled with plastic foam. Several companies have produced the AR-7 and derivative models since their introduction in the late 1950s, includingHenry Repeating Arms, ofBayonne, New Jersey on theBergen Neck peninsula east ofElizabeth.
ArmaLite engineers spent most of their time and engineering efforts in 1955 and 1956 developing the prototypes for what became theAR-10. Based on Stoner's fourth prototype,Springfield Armory tested two hand-built production AR-10s in late 1956 and again in 1957 as a possible replacement to the venerable yet outdatedM1 Garand. The untested AR-10 faced competition from the two other significant rifle designs, the Springfield ArmoryT-44, an updated M1 Garand design which became theM14, and theT-48, a version of the famousBelgianFN FAL rifle. The T-44 and the T-48 were several years more advanced than the AR-10 in development and trial testing; the T-44 had the additional advantage of being an in-house Springfield Armory design.[8] TheUS Army eventually selected the T-44 over both the AR-10 and the T-48.
ArmaLite continued to market the AR-10 based on a limited production of rifles at its Hollywood facility. The limited-production, virtually hand-built rifles are "Hollywood" model AR-10s.[9] In 1957, Fairchild/ArmaLite sold a five-year manufacturing license for the AR-10 to theDutch arms manufacturerArtillerie-Inrichtingen (AI). Converting the AR-10 engineering drawings to metric, AI found the Hollywood version of the AR-10 to be deficient in many respects[citation needed] and made many significant design and engineering changes in the AR-10 that continued throughout the production run in theNetherlands. Firearms historians[who?] have separated AR-10 production under the AI license into three identifiable versions of the AR-10: the "Sudanese" model, the "Transitional", and the "Portuguese" model AR-10.[citation needed] The Sudanese version derives its name from its sale to the government ofSudan, which purchased approximately 2,500 AR-10 rifles, while the Transitional model incorporated additional design changes based on experience with the Sudanese model in the field. The final AI-produced AR-10, the Portuguese, was a product-improved variant sold to thePortuguese Air Force for use by paratroopers.[10] While AR-10 production at AI dwarfed that of ArmaLite's Hollywood business, it was still limited as sales to foreign armies proved elusive.Guatemala,Burma,Italy,Cuba,Sudan, andPortugal purchased AR-10 rifles for limited issue to their military forces,[10][11][12][13] resulting in a total production of less than 10,000 AR-10 rifles in four years. ArmaLite never adopted AI's suggested design changes and product improvements.[citation needed]
Disappointed with AR-10 sales, Fairchild ArmaLite decided to terminate its association with AI and instead concentrate on producing a small-caliber version of the AR-10 to meet a requirement for the US Air Force. Using the Hollywood-produced AR-10, the prototype was downsized in dimensions to accept the .223 Remington (5.56 mm) cartridge.[14] That resulted in theArmaLite AR-15, designed by Eugene Stoner,Jim Sullivan, and Bob Fremont, and chambered in 5.56 mm caliber.[14] ArmaLite also re-introduced the AR-10, this time using a design derived from the original Hollywood prototypes of 1956, and designated the AR-10A. Unable to produce either rifle in quantity, ArmaLite licensed both designs toColt in early 1959. Also in 1959, ArmaLite moved its corporate offices and engineering and production shop to 118 East 16th Street inCosta Mesa, California next toIrvine.[15]
Frustrated by what it perceived as unnecessary production delays at AI and poor AR-10 sales, Fairchild decided not to renew Artillerie-Inrichtingen's license to produce the AR-10. In 1962, disappointed with ArmaLite's meager profits, primarily derived from licensing fees, Fairchild dissolved its association with ArmaLite.[15]
With the AR-10 and AR-15 designs sold to Colt, ArmaLite was left without a viable major infantry arm to market to potential manufacturers and end users. ArmaLite developed a series of less expensive new rifle designs in 7.62 mm and 5.56 mm. The 7.62 mm NATO rifle was designated theAR-16. The AR-16 and the other newly designed ArmaLites utilized a more traditional gas piston design with stamped and welded steel construction in place of aluminum forgings. Due to the success of the FN FAL, H&K G3, and the US M14, the 7.62 mm AR-16 (not to be confused with theM16) was produced only in prototype quantities. ArmaLite also developed the AR-17, a 5.5-pound, two-shot autoloading shotgun based on the short-recoil principle with aluminum and plastic construction; ArmaLite only produced about 1,200.[16]
In 1963, development began on theAR-18 rifle, a "downsized" 5.56 mm AR-16 with a new gas system utilizing a short stroke gas piston instead of the Stoner direct gas impingement system used on the AR-10 and AR-15. Designed by Art Miller, ArmaLite accompanied the AR-18 with a semi-automatic version, the AR-180.[2] However, the sales success of the AR-15 worldwide to the U.S. military and other nations proved the undoing of the AR-18, and the latter failed to garner substantial orders. In response to criticism of the rifle's performance in trials by the military in the United States andGreat Britain, ArmaLite made a few minor improvements to the original design but did little else. ArmaLite manufactured some AR-18 and AR-180 rifles at its Costa Mesa facility and later licensed production toHowa Machinery Company inJapan. However, Japan prohibited the sale of military-style arms to combative nations. With the United States involved in theVietnam War, production at the Howa plant was limited. ArmaLite then licensed production toSterling Armaments Company inDagenham, UK. Sales remained modest.[clarification needed] Today, the AR-180 is best known for its use by theProvisional Irish Republican Army inIreland, who received small quantities of the rifle from black market sources. The AR-18 gas system and rotating bolt mechanism served as the basis for the currentBritish small arms family, theSA80, which came from theXL65, essentially an AR-18 inbullpup configuration.[citation needed] Other designs including the SingaporeSAR 80 and GermanG36, are based upon the AR-18.[citation needed]
A derivative of the AR-16 was theAR-100 series. It came in four variants: the closed-bolt AR-101 rifle and AR-102 carbine, and the open-bolt fired AR-103 carbine and AR-104 light machine gun with ejecting magazines. ArmaLite intended the weapon to increase a squad's firepower and mobility.[17] It was never adopted but led to theUltimax 100.
By the 1970s, ArmaLite had essentially stopped all new rifle development, and the company effectively ceased operations.[2] In 1983, ArmaLite was sold to the Elisco Tool Manufacturing Company of thePhilippines. The AR-18 tooling at the Costa Mesa factory went to the Philippines. At the same time, some of the remaining ArmaLite employees acquired the remaining inventory of parts for the AR-17 and AR-18.[2] Elisco had planned to pitch the AR-18 as a replacement for the license-produced M16A1 then in service with the Armed Forces of the Philippines and such made several modifications to the design. Twenty (20) prototypes of four types (AR 101, AR 102, AR 103, and the AR 104) were built and underwent testing and evaluation. About 3,500 of the rifles, collectively designated theAR Series 100 were approved for production.[18] Production plans for the AR Series 100 failed to be completed as Elisco dissolved and liquidated its assets in the late 1980s.
After passing through a series of owners, Mark Westrom, a former U.S. Armyordnance officer and inventor of a 7.62 NATO sniper rifle based on Eugene Stoner's design concepts, purchased the ArmaLite brand name and rampant lion logo in 1996. The company resumed business as ArmaLite Inc. ArmaLite produced some AR-15 and AR-10-based rifles, as well as.50 BMG rifles (theAR-50), and a modified AR-180 named the AR-180B (discontinued in 2009). In the mid-2000s, ArmaLite announced that it was introducing a handgun line including theAR-24 and AR-26 (both pistols also discontinued).
In 2013, Westrom sold ArmaLite, Inc. toStrategic Armory Corps, owner of AWC Silencers, Surgeon Rifles, Nexus Ammo, andMcMillan Firearms. Strategic Armory Corps was formed to acquire and combine firearm companies.[3]
