 | This articleneeds additional citations forverification. Please helpimprove this article byadding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Acoustic network" – news ·newspapers ·books ·scholar ·JSTOR(November 2024) (Learn how and when to remove this message) |
 | This articlepossibly containsoriginal research. Pleaseimprove it byverifying the claims made and addinginline citations. Statements consisting only of original research should be removed.(November 2024) (Learn how and when to remove this message) |
Anacoustic network is a method of positioning equipment usingsound waves. It is primarily used in water, and can be as small or as large as required by the users specifications.[citation needed]
The simplest acoustic network consists of one measurement resulting in a single range between sound source and sound receiver.
Bigger networks are only limited by the amount of equipment available, and computing power needed to resolve the resulting data. The latest acoustic networks used in the marine seismic industry can resolve a network of some 16,000 individual ranges in a matter of seconds.
The principle behind all acoustic networks is the same. Distance = speed x travel time. If the travel time and speed of the sound signal are known, we can calculate the distance between source and receiver. In most networks, the speed of the acoustic signal is assumed at a specific value. This value is either derived from measuring a signal between two known points, or by using specific equipment to calculate it fromenvironmental conditions.
The diagram below shows the basic operation of measuring a single range.
If the operator is using acoustic ranges to position items in unknown locations they will need to use more than the single range example shown above.
As there is only one measurement, the receiver could be anywhere on a circle with aradius equal to the calculated range and centered on thetransmitter.
If a second transmitter is added to thesystem the number of possible positions for the receiver is reduced to two.
It is only when three or more ranges are introduced into the system, is the position of the receiver achieved.
