Mixed logit is a fully general statistical model for examiningdiscrete choices. It overcomes three important limitations of the standardlogit model by allowing for random taste variation across choosers, unrestricted substitution patterns across choices, and correlation in unobserved factors over time.^[1] Mixed logit can choose any distribution${\displaystyle f}$ for the random coefficients, unlike probit which is limited to the normal distribution. It is called "mixed logit" because the choice probability is a mixture of logits, with${\displaystyle f}$ as the mixing distribution.^[2] It has been shown that a mixed logit model can approximate to any degree of accuracy any true random utility model of discrete choice, given appropriate specification of variables and the coefficient distribution.^[3]

The standard logit model's "taste" coefficients, or${\displaystyle \beta }$'s, are fixed, which means the${\displaystyle \beta }$'s are the same for everyone. Mixed logit has different${\displaystyle \beta }$'s for each person (i.e., each decision maker.)

In the standard logit model, the utility of person${\displaystyle n}$ for alternative${\displaystyle i}$ is:

${\displaystyle U_{ni}=\beta x_{ni}+{\epsilon }_{ni}}$

with

${\displaystyle {\epsilon }_{ni}}$ ~ iid extreme value

For the mixed logit model, this specification is generalized by allowing${\displaystyle {\beta }_n}$ to be random. The utility of person${\displaystyle n}$ for alternative${\displaystyle i}$ in the mixed logit model is:

${\displaystyle U_{ni}={\beta }_n{x}_{ni}+{\epsilon }_{ni}}$

with

${\displaystyle {\epsilon }_{ni}}$ ~ iid extreme value

${\displaystyle {\beta }_n\sim f(\beta |\theta )}$

whereθ are the parameters of the distribution of${\displaystyle {\beta }_n}$'s over the population, such as the mean and variance of${\displaystyle {\beta }_n}$.

Conditional on${\displaystyle {\beta }_n}$, the probability that person${\displaystyle n}$ chooses alternative${\displaystyle i}$ is the standard logit formula:

${\displaystyle L_{ni}({\beta }_n)=\frac{e^{{\beta }_n{X}_{ni}}}{\sum _j{e}^{{\beta }_n{X}_{nj}}}}$

However, since${\displaystyle {\beta }_n}$ is random and not known, the (unconditional) choice probability is the integral of this logit formula over the density of${\displaystyle {\beta }_n}$.

${\displaystyle P_{ni}=\int L_{ni}(\beta )f(\beta |\theta )d\beta }$

This model is also called the random coefficient logit model since${\displaystyle {\beta }_n}$ is a random variable. It allows the slopes of utility (i.e., themarginal utility) to be random, which is an extension of therandom effects model where only the intercept was stochastic.

Anyprobability density function can be specified for the distribution of the coefficients in the population, i.e., for${\displaystyle f(\beta |\theta )}$. The most widely used distribution is normal, mainly for its simplicity. For coefficients that take the same sign for all people, such as a price coefficient that is necessarily negative or the coefficient of a desirable attribute, distributions with support on only one side of zero, like the lognormal, are used.^[4][5] When coefficients cannot logically be unboundedly large or small, then bounded distributions are often used, such as the${\displaystyle S_b}$ or triangular distributions.

The mixed logit model can represent general substitution pattern because it does not exhibit logit's restrictiveindependence of irrelevant alternatives (IIA) property. The percentage change in person${\displaystyle n}$'s unconditional probability of choosing alternative${\displaystyle i}$ given a percentage change in themth attribute of alternative${\displaystyle j}$ (theelasticity of${\displaystyle P_{ni}}$ with respect to${\displaystyle x_{nj}^m}$) is

${\displaystyle {\text{Elasticity}}_{P_{ni},x_{nj}^m}=-\frac{x_{nj}^m}{P_{ni}}\int {\beta }^m{L}_{ni}(\beta )L_{nj}(\beta )f(\beta )d\beta =-x_{nj}^m\int {\beta }^m{L}_{nj}(\beta )\frac{L_{ni}(\beta )}{P_{ni}}f(\beta )d\beta }$

where${\displaystyle {\beta }^m}$ is themth element of${\displaystyle \beta }$.^[1][5] It can be seen from this formula that a ten-percent reduction for${\displaystyle P_{ni}}$ need not imply (as with logit) a ten-percent reduction in each other alternative${\displaystyle P_{nj}}$.^[1] The reason is that the relative percentages depend on the correlation between the conditional likelihood that person${\displaystyle n}$ will choose alternative${\displaystyle i,L_{ni},}$ and the conditional likelihood that person${\displaystyle n}$ will choose alternative${\displaystyle j,L_{nj},}$ over various draws of${\displaystyle \beta }$.

Standard logit does not take into account any unobserved factors that persist over time for a given decision maker. This can be a problem if you are using panel data, which represent repeated choices over time. By applying a standard logit model to panel data you are making the assumption that the unobserved factors that affect a person's choice are new every time the person makes the choice. That is a very unlikely assumption. To take into account both random taste variation and correlation in unobserved factors over time, the utility for respondent n for alternative i at time t is specified as follows:

${\displaystyle U_{nit}={\beta }_n{X}_{nit}+{\epsilon }_{nit}}$

where the subscript t is the time dimension. We still make the logit assumption which is that${\displaystyle \epsilon }$ is i.i.d extreme value. That means that${\displaystyle \epsilon }$ is independent over time, people, and alternatives.${\displaystyle \epsilon }$ is essentially just white noise. However, correlation over time and over alternatives arises from the common effect of the${\displaystyle \beta }$'s, which enter utility in each time period and each alternative.

To examine the correlation explicitly, assume that theβ's are normally distributed with mean${\displaystyle \overline{\beta }}$ and variance${\displaystyle {\sigma }^2}$. Then theutility equation becomes:

${\displaystyle U_{nit}=(\overline{\beta }+\sigma {\eta }_n)X_{nit}+{\epsilon }_{nit}}$

andη is a draw from the standard normal density. Rearranging, the equation becomes:

${\displaystyle U_{nit}=\overline{\beta }{X}_{nit}+(\sigma {\eta }_n{X}_{nit}+{\epsilon }_{nit})}$

${\displaystyle U_{nit}=\overline{\beta }{X}_{nit}+e_{nit}}$

where the unobserved factors are collected in${\displaystyle e_{nit}=\sigma {\eta }_n{X}_{nit}+{\epsilon }_{nit}}$. Of the unobserved factors,${\displaystyle {\epsilon }_{nit}}$ is independent over time, and${\displaystyle \sigma {\eta }_n{X}_{nit}}$ is not independent over time or alternatives.

Then the covariance between alternatives${\displaystyle i}$ and${\displaystyle j}$ is,

${\displaystyle \text{Cov}(e_{nit},e_{njt})={\sigma }^2(X_{nit}{X}_{njt})}$

and the covariance between time${\displaystyle t}$ and${\displaystyle q}$ is

${\displaystyle \text{Cov}(e_{nit},e_{niq})={\sigma }^2(X_{nit}{X}_{niq})}$

By specifying the X's appropriately, one can obtain any pattern of covariance over time and alternatives.

Conditional on${\displaystyle {\beta }_n}$, the probability of the sequence of choices by a person is simply the product of the logit probability of each individual choice by that person:

${\displaystyle L_n({\beta }_n)=\prod _t\frac{e^{{\beta }_n{X}_{nit}}}{\sum _j{e}^{{\beta }_n{X}_{njt}}}}$

since${\displaystyle {\epsilon }_{nit}}$ is independent over time. Then the (unconditional) probability of the sequence of choices is simply the integral of this product of logits over the density of${\displaystyle \beta }$.

${\displaystyle P_{ni}=\int L_n(\beta )f(\beta |\theta )d\beta }$

Unfortunately there is no closed form for the integral that enters the choice probability, and so the researcher must simulate P_n. Fortunately for the researcher, simulating P_n can be very simple. There are four basic steps to follow

1. Take a draw from the probability density function that you specified for the 'taste' coefficients. That is, take a draw from${\displaystyle f(\beta |\theta )}$ and label the draw${\displaystyle {\beta }^r}$, for${\displaystyle r=1}$ representing the first draw.

2. Calculate${\displaystyle L_n({\beta }^r)}$. (The conditional probability.)

3. Repeat many times, for${\displaystyle r=2,...,R}$.

4. Average the results

Then the formula for the simulation look like the following,

${\displaystyle {\tilde{P}}_{ni}=\frac{\sum _r{L}_{ni}({\beta }^r)}{R}}$

where R is the total number of draws taken from the distribution, and r is one draw.

Once this is done you will have a value for the probability of each alternative i for each respondent n.

• Discrete choice

• Ch. 6 ofDiscrete Choice Methods with Simulation, byKenneth Train (Cambridge University Press)

• Choice modelling

• Articles with short description
• Short description matches Wikidata