 | This article'slead sectionmay be too short to adequatelysummarize the key points. Please consider expanding the lead toprovide an accessible overview of all important aspects of the article.(February 2012) |
Agamepad is a type of videogame controller held in two hands, where the fingers (especially thumbs) are used to provide input. They are typically the maininput device forvideo game consoles.
Some common additions to the standard pad include shoulder buttons (also called "bumpers") and triggers placed along the edges of the pad (shoulder buttons are usually digital, i.e. merely on/off; while triggers are usuallyanalog); centrally placedstart,select, andhome buttons,[clarification needed] and an internal motor to provideforce feedback. Analog triggers, like that of theGameCube controller, are pressure-sensitive and games can read in the amount of pressure applied to one to control the intensity of a certain action, such as how forceful water is to be sprayed inSuper Mario Sunshine.[1]
There are programmable joysticks that can emulatekeyboard input. Generally they have been made to circumvent the lack of joystick support in some computer games, e.g. theBelkinNostromo SpeedPad n52. There are several programs that emulate keyboard and mouse input with a gamepad such as thefree and open-sourcecross-platform software antimicro,[2][3] Enjoy2,[4] or proprietary commercial solutions such as JoyToKey, Xpadder, and Pinnacle Game Profiler.[citation needed]
One common issue with modern game controllers is stick drift, where the analog stick registers movement even when not being touched. This problem can affect gameplay accuracy and responsiveness. To diagnose stick drift, various online stick drift tester tools are available, allowing users to visualize stick movement and detect irregular inputs. These tools, often web-based, help determine whether recalibration, cleaning, or hardware repair is necessary.[5][6] Some platforms, like Steam, also include built-in calibration settings to mitigate minor drift issues.
The 1962 video gameSpacewar! initially used toggle switches built into the computer readout display to control the game. These switches were awkward and uncomfortable to use, soAlan Kotok and Bob Saunders built and wired in a detached control device for the game. This device has been called the earliest gamepad.[7]
It would take many years for the gamepad to rise to prominence, as during the 1970s and the early 1980sjoysticks andpaddles were the dominant video game controllers,[7] though severalAtari joystick port-compatible pushbutton controllers were also available.[8] Thethird generation of video games saw many major changes, and the eminence of gamepads in the video game market.[citation needed]
Nintendo developed a gamepad device for directional inputs, a D-pad with a "cross" design for theirDonkey Kong handheld game. This design would be incorporated into their "Game & Watch" series and console controllers such as the standardNES controller. Though developed because they were more compact than joysticks, and thus more appropriate for handheld games, D-pads were soon found by developers to be more comfortable to use than joysticks.[7] The D-pad soon became a ubiquitous element on console gamepads, though to avoid infringing on Nintendo's patent, most controller manufacturers use a cross in a circle shape for the D-pad instead of a simple cross.[9]
The originalSega Genesis/Mega Drive control pad has three face buttons,[10] but a six-button pad was later released.[11] TheSNES controller also featured six action buttons, with four face buttons arranged in a diamond formation, and two shoulder buttons positioned to be used with the index fingers, a design which has been imitated by most controllers since. The inclusion of six action buttons was influenced by the popularity of theStreet Fighter arcade series, which utilized six buttons.[12]
For most of the 1980s and early 1990s,analog joysticks were the predominant form of gaming controller for PCs, while console gaming controllers were mostly digital.[7] This changed in 1996 when all three major consoles introduced an optional analog control. The SonyDual Analog Controller had twin convex analog thumbsticks, theSega Saturn 3D Control Pad had a single analog thumbstick, and theNintendo 64 controller combined digital and analog controllers in a single body, starting a trend to have both an analog stick and a d-pad.
Despite these changes, gamepads essentially continued to follow the template set by the NES controller (a horizontally-oriented controller with two or more action buttons positioned for use with the right thumb, and a directional pad positioned for use with the left thumb).[7]
Though three-dimensional games rose to prominence in the mid-1990s, controllers continued to mostly operate on two-dimensional principles. Players would have to hold down a button to change the axes along which the controls operate rather than being able to control movement along all three axes at once. One of the first gaming consoles, theFairchild Channel F, did have a controller which providedsix degrees of freedom, but the processing limitations of the console itself prevented there from being any software to take advantage of this ability.[7] In 1994,Logitech introduced the CyberMan, the first practical six-degrees-of-freedom controller; however, it sold poorly due to its high price, poor build quality, and limited software support. Industry insiders blame the CyberMan's high profile and costly failure for the gaming industry's lack of interest in developing 3D control over the next several years.[7]TheWii Remote is shaped like atelevisionremote control and containstilt sensors and three-dimensional pointing which the system uses to understand alldirections of movement and rotation (back and forth around thepitch, roll, and yaw axes). The controller is also multifunctional and has an expansion port which can be used for a variety of peripherals. An analog stick peripheral, called "Nunchuk," also contains anaccelerometer[13] but unlike the Wii Remote, it lacks any pointer functionality.
Gamepads may be gripped differently for better ergonomics or a gaming advantage.[14]
The standard grip involves operating the trigger buttons with the index fingers, with the thumbs operating both the analog sticks and digital buttons. This grip is common among gamers, but it leaves the thumbs unable to operate the digital buttons while operating the analog sticks, and vice versa, leading to a time consuming alternation.[14]
The claw grip attempts to alleviate the standard grip's problem of alternation by operating the trigger buttons with the middle fingers, the directional buttons with the index fingers and the analog sticks with the thumbs.[14] This grip may be used exclusively, or with only one hand, with the other hand using the standard grip.[15] The claw grip is named as such because the player's index fingers take the shape of a claw or hook when used.[16]
The claw grip may cause pain or injury due to strain on the index finger.[16] Although the grip is commonly used in certain games, playerNickmercs warned his audience that the claw grip may cause complications in 2019.[14]
Gamepads are also available forpersonal computers. Examples of PC gamepads include theAsus Eee Stick, theGravis PC, theMicrosoft SideWinder andSaitek Cyborg range, and theSteam Controller. Third-party USB adapters and software can be employed to utilize console gamepads on PCs; theDualShock 3, DualShock 4,DualSense,Wii Remote,Wii U Pro Controller,Joy-Con,Joy-Con 2,Nintendo Switch Pro Controller andNintendo Switch 2 Pro Controller can be used with third-party software on systems withBluetooth functionality, withUSB additionally usable on DualShock 3, DualShock 4, DualSense, Nintendo Switch Pro Controller and Nintendo Switch 2 Pro Controller.Xbox 360,Xbox One andXbox Series X/S controllers are officially supported onWindows with Microsoft-supplied drivers; adongle can be used to connect them wirelessly, or the controller can be connected directly to the computer over USB (wired versions of Xbox 360 controllers were marketed by Microsoft as PC gamepads, while the Xbox One/Series X/S controllers can be connected to a PC via its Micro USB/USB-C slot).[17][18][19]
Gamepads or devices closely modelled on them are sometimes used for controlling real machinery and vehicles, as they are familiar to users and (in the case of actual gamepads) provide an off-the-shelf solution. TheUS Army andUS Navy use Xbox controllers[20]for operating devices, and theBritish Army uses a device modelled on gamepads to operate systems on theChallenger 2main battle tank.[21]TheTitan submersible used a gamepad for control.[22]
{{cite web}}: CS1 maint: numeric names: authors list (link)