Creates a new virtual machine.

Create a virtual machine mirror for a target VM.

This exception may be thrown as a result of a timeout when attaching to a target VM, or waiting to accept a connection from a target VM.

Waits for a target VM to attach to this connector.

Attaches to a running application and returns a mirror of its VM.

Launches an application and connects to its VM.

Listens for one or more connections initiated by target VMs.

Cancels listening for connections.

This exception may be thrown as a result of an asynchronous close of aConnection while an I/O operation is in progress.

Accept a connection from a target VM.

Attaches to the specified address.

Closes this connection.

Reads a packet from the target VM.

Listens on an address chosen by the transport service.

Listens on the specified address for inbound connections.

Stop listening for inbound connections.

Writes a packet to the target VM.

Dumps the heap to theoutputFile file in the same format as the hprof heap dump.

Generate a thread dump to the given file in the given format.

Binds a currently unboundHttpServer to the given address and port number.

Creates aHttpServer instance which is initially not bound to any local address/port.

Create aHttpServer instance which will bind to the specifiedInetSocketAddress (IP address and port number).

Creates anHttpServer instance with an initial context.

Creates aHttpsServer instance which is initially not bound to any local address/port.

Create aHttpsServer instance which will bind to the specifiedInetSocketAddress (IP address and port number).

Creates anHttpsServer instance with an initial context.

Calls the next filter in the chain, or else the users exchange handler, if this is the final filter in the chain.

Asks this filter to pre/post-process the given exchange.

Handle the given request and generate an appropriate response.

Starts sending the response back to the client using the current set of response headers and the numeric response code as specified in this method.

creates a HttpServer from this provider

creates a HttpsServer from this provider

Accepts an association on this channel's socket.

Returns the association on this channel's socket.

Returns the open associations on this channel's socket.

Binds the channel's socket to a local address.

Binds the channel's socket to a local address and configures the socket to listen for connections.

Binds the channel's socket to a local address and configures the socket to listen for connections.

Binds the channel's socket to a local address and configures the socket to listen for associations.

Binds the channel's socket to a local address and configures the socket to listen for associations.

Adds the given address to the bound addresses for the channel's socket.

Adds the given address to the bound addresses for the channel's socket.

Adds the given address to the bound addresses for the channel's socket.

Branches off an association.

Connects this channel's socket.

Connects this channel's socket.

Finishes the process of connecting an SCTP channel.

Returns all of the socket addresses to which this channel's socket is bound.

Returns all of the socket addresses to which this channel's socket is bound.

Returns all of the socket addresses to which this channel's socket is bound.

Returns the value of a socket option.

Returns the value of a socket option.

Returns the value of a socket option.

Returns all of the remote addresses to which this channel's socket is connected.

Returns all of the remote addresses to which the given association on this channel's socket is connected.

Opens an SCTP channel.

Opens an SCTP channel and connects it to a remote address.

Opens an SCTP multi channel.

Opens an SCTP server channel.

Receives a message into the given buffer and/or handles a notification.

Receives a message and/or handles a notification via this channel.

Sends a message via this channel.

Sends a message via this channel.

Sets the value of a socket option.

Sets the value of a socket option.

Sets the value of a socket option.

Shutdown a connection without closing the channel.

Shutdown an association without closing the channel.

Removes the given address from the bound addresses for the channel's socket.

Removes the given address from the bound addresses for the channel's socket.

Removes the given address from the bound addresses for the channel's socket.

Handles the specified set of callbacks.

Completes all analysis.

Generates code.

Returns the doc comment tree of the given file, which must be of one of the supported file types, and whose path is specified relative to the given element.

Parses the specified files returning a list of abstract syntax trees.

Exception type to signal that an attach operation failed in the target VM.

Attaches to a Java virtual machine.

Attaches to a Java virtual machine.

Detach from the virtual machine.

Returns the currentagent properties in the target virtual machine.

Returns the current system properties in the target virtual machine.

Loads an agent.

Loads an agent.

Loads an agent library.

Loads an agent library.

Load a native agent library by full pathname.

Load a native agent library by full pathname.

Starts the local JMX management agent in the target virtual machine.

Starts the JMX management agent in the target virtual machine.

Attaches to a Java virtual machine.

Attaches to a Java virtual machine.

Associates the specified stream with the specified key in this applet context.

Launches the default browser to display aURI.

Returns a newFont using the specified font type and the specified font file.

Returns a newFont using the specified font type and input data.

Returns a new array ofFont decoded from the specified file.

Returns a new array ofFont decoded from the specified stream.

Launches the associated editor application and opens a file for editing.

Launches the mail composing window of the user default mail client.

Launches the mail composing window of the user default mail client, filling the message fields specified by a mailto: URI.

Launches the associated application to open the file.

Prints a file with the native desktop printing facility, using the associated application's print command.

Saves a Serializable listener chain to a serialization stream.

Serialization support.

Changes the splash screen image.

Constructs anICC_Profile corresponding to the data in anInputStream.

Constructs anICC_Profile corresponding to the data in a file.

Write thisICC_Profile to anOutputStream.

Write thisICC_Profile to a file.

Returns an object representing the current contents of this clipboard in the specifiedDataFlavor.

Gets a Reader for a text flavor, decoded, if necessary, for the expected charset (encoding).

Returns theTransferable's data in the requestedDataFlavor if possible.

Returns an object which represents the data to be transferred.

Restores thisDataFlavor from a Serialized state.

Serializes thisDataFlavor.

Returns an object which represents the data provided by the encapsulated transferable for the requested data flavor.

Returns theIOException that terminated the print job.

Constructs a newPrinterIOException with the string representation of the specifiedIOException.

Instantiate a JavaBean.

called from BeanContextSupport readObject before it deserializes the children ...

called by readObject after defaultReadObject() but prior to deserialization of any children.

called from BeanContextSupport writeObject before it serializes the children ...

called by writeObject after defaultWriteObject() but prior to serialization of currently serializable children.

used by readObject to deserialize a collection.

Instantiate the javaBean named as a child of thisBeanContext.

The instantiateChild method is a convenience hook in BeanContext to simplify the task of instantiating a Bean, nested, into aBeanContext.

When an instance of this class is used as a delegate for the implementation of the BeanContext protocols (and its subprotocols) there exists a 'chicken and egg' problem during deserialization

Used by writeObject to serialize a Collection.

Used to serialize all children of thisBeanContext.

Base class for character conversion exceptions.

Signals that an end of file or end of stream has been reached unexpectedly during input.

Signals that an attempt to open the file denoted by a specified pathname has failed.

Signals that an I/O operation has been interrupted.

Thrown when the Serialization runtime detects one of the following problems with a Class.

Indicates that one or more deserialized objects failed validation tests.

Thrown when serialization or deserialization is not active.

Thrown when an instance is required to have a Serializable interface.

Superclass of all exceptions specific to Object Stream classes.

Exception indicating the failure of an object read operation due to unread primitive data, or the end of data belonging to a serialized object in the stream.

Thrown when control information that was read from an object stream violates internal consistency checks.

Signals that a sync operation has failed.

The Character Encoding is not supported.

Signals that a malformed string inmodified UTF-8 format has been read in a data input stream or by any class that implements the data input interface.

Signals that one of the ObjectStreamExceptions was thrown during a write operation.

Returns the cause of this exception.

Subclasses may implement this method to allow class data to be stored in the stream.

Subclasses may implement this method to store custom data in the stream along with descriptors for dynamic proxy classes.

Appends the specified character to this writer.

Appends the specified character sequence to this writer.

Appends a subsequence of the specified character sequence to this writer.

Returns an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking by the next invocation of a method for this input stream.

Returns an estimate of the number of remaining bytes that can be read (or skipped over) from this input stream without blocking by the next invocation of a method for this input stream.

Returns an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking by the next caller of a method for this input stream.

Returns an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking, which may be 0, or 0 when end of stream is detected.

Returns the number of bytes that can be read from this input stream without blocking.

Returns the number of bytes that can be read without blocking.

Returns the number of bytes that can be read without blocking.

Returns the number of bytes that can be read from this input stream without blocking.

Returns an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking by the next invocation of a method for this input stream.

Returns an estimate of the number of bytes that can be read (or skipped over) from the current underlying input stream without blocking by the next invocation of a method for the current underlying input stream.

Closes this input stream and releases any system resources associated with the stream.

Closing aByteArrayInputStream has no effect.

Closing aByteArrayOutputStream has no effect.

Closes this stream and releases any system resources associated with it.

Closes this file input stream and releases any system resources associated with the stream.

Closes this file output stream and releases any system resources associated with this stream.

Closes this input stream and releases any system resources associated with the stream.

Closes this output stream and releases any system resources associated with the stream.

Closes this input stream and releases any system resources associated with the stream.

Closes the input stream.

Closes this input stream and releases any system resources associated with the stream.

Closes the stream.

Closes the stream.

Closes this output stream and releases any system resources associated with this stream.

Closes this input stream and releases any system resources associated with the stream.

Closes this piped output stream and releases any system resources associated with this stream.

Closes this piped stream and releases any system resources associated with the stream.

Closes this piped output stream and releases any system resources associated with this stream.

Closes this input stream and releases any system resources associated with the stream.

Closes the stream and releases any system resources associated with it.

Closes this random access file stream and releases any system resources associated with the stream.

Closes the stream and releases any system resources associated with it.

Closes this input stream and releases any system resources associated with the stream.

Closing aStringWriter has no effect.

Closes the stream, flushing it first.

Causes this piped input stream to be connected to the piped output streamsrc.

Connects this piped output stream to a receiver.

Causes this piped reader to be connected to the piped writersrc.

Connects this piped writer to a receiver.

Atomically creates a new, empty file named by this abstract pathname if and only if a file with this name does not yet exist.

Creates an empty file in the default temporary-file directory, using the given prefix and suffix to generate its name.

Creates a new empty file in the specified directory, using the given prefix and suffix strings to generate its name.

Return true if the named field is defaulted and has no value in this stream.

Read the non-static and non-transient fields of the current class from this stream.

Write the non-static and non-transient fields of the current class to this stream.

Drain any buffered data in ObjectOutputStream.

Flushes this buffered output stream.

Flushes the stream.

Flushes this data output stream.

Flushes this output stream and forces any buffered output bytes to be written out to the stream.

Flushes the stream.

Flushes this stream by writing any buffered output to the underlying stream.

Flushes the stream.

Flushes the stream.

Flushes this output stream and forces any buffered output bytes to be written out.

Flushes the stream.

Flushes this output stream and forces any buffered output bytes to be written out.

Flushes this output stream and forces any buffered output characters to be written out.

Flushes the stream.

Get the value of the named boolean field from the persistent field.

Get the value of the named byte field from the persistent field.

Get the value of the named char field from the persistent field.

Get the value of the named double field from the persistent field.

Get the value of the named float field from the persistent field.

Get the value of the named int field from the persistent field.

Get the value of the named long field from the persistent field.

Get the value of the named short field from the persistent field.

Get the value of the named Object field from the persistent field.

Returns the canonical form of this abstract pathname.

Returns the canonical pathname string of this abstract pathname.

Returns theFileDescriptor object that represents the connection to the actual file in the file system being used by thisFileInputStream.

Returns the file descriptor associated with this stream.

Returns the opaque file descriptor object associated with this stream.

Returns the current offset in this file.

Returns the length of this file.

Marks the present position in the stream.

Marks the present position in the stream.

Marks the present position in the stream.

Mark the present position in the stream.

Marks the present position in the stream.

Marks the present position in the stream.

Marks the present position in the stream.

Writes a line separator.

Parses the next token from the input stream of this tokenizer.

Retrieve the object used to buffer persistent fields to be written to the stream.

See the general contract of theread method ofInputStream.

Reads bytes from this byte-input stream into the specified byte array, starting at the given offset.

Reads a single character.

Reads characters into a portion of an array.

Reads a single character.

Reads characters into a portion of an array.

Reads some number of bytes from the contained input stream and stores them into the buffer arrayb.

Reads up tolen bytes of data from the contained input stream into an array of bytes.

Reads a byte of data from this input stream.

Reads up tob.length bytes of data from this input stream into an array of bytes.

Reads up tolen bytes of data from this input stream into an array of bytes.

Reads the next byte of data from the input stream.

Reads up tob.length bytes of data from this input stream into an array of bytes.

Reads up tolen bytes of data from this input stream into an array of bytes.

Reads a single character.

Reads characters into a portion of an array.

Reads the next byte of data from the input stream.

Reads some number of bytes from the input stream and stores them into the buffer arrayb.

Reads up tolen bytes of data from the input stream into an array of bytes.

Reads a single character.

Reads characters into a portion of an array.

Reads the next byte of data from this input stream.

Reads up tolen bytes of data from this input stream into an array of bytes.

Read a single character.

Reads characters into a portion of an array.

Reads a byte of data.

Reads into an array of bytes.

Reads into an array of bytes.

Reads a byte of data.

Reads into an array of bytes.

Reads the next byte of data from this piped input stream.

Reads up tolen bytes of data from this piped input stream into an array of bytes.

Reads the next character of data from this piped stream.

Reads characters into a portion of an array.

Reads the next byte of data from this input stream.

Reads up tolen bytes of data from this input stream into an array of bytes.

Reads a single character.

Reads a byte of data from this file.

Reads up tob.length bytes of data from this file into an array of bytes.

Reads up tolen bytes of data from this file into an array of bytes.

Reads a single character.

Reads characters into an array.

Reads characters into a portion of an array.

Attempts to read characters into the specified character buffer.

Reads the next byte of data from the input stream.

Reads up tolen bytes of data from this input stream into an array of bytes.

Reads a single character.

Reads characters into a portion of an array.

Reads all remaining bytes from the input stream.

Reads one input byte and returnstrue if that byte is nonzero,false if that byte is zero.

See the general contract of thereadBoolean method ofDataInput.

Reads in a boolean.

Reads aboolean from this file.

Reads and returns one input byte.

See the general contract of thereadByte method ofDataInput.

Reads an 8-bit byte.

Reads a signed eight-bit value from this file.

Reads two input bytes and returns achar value.

See the general contract of thereadChar method ofDataInput.

Reads a 16-bit char.

Reads a character from this file.

Read a class descriptor from the serialization stream.

Reads eight input bytes and returns adouble value.

See the general contract of thereadDouble method ofDataInput.

Reads a 64-bit double.

Reads adouble from this file.

The object implements the readExternal method to restore its contents by calling the methods of DataInput for primitive types and readObject for objects, strings and arrays.

Reads the persistent fields from the stream and makes them available by name.

Reads four input bytes and returns afloat value.

See the general contract of thereadFloat method ofDataInput.

Reads a 32-bit float.

Reads afloat from this file.

Reads some bytes from an input stream and stores them into the buffer arrayb.

Readslen bytes from an input stream.

See the general contract of thereadFully method ofDataInput.

See the general contract of thereadFully method ofDataInput.

Reads bytes, blocking until all bytes are read.

Reads bytes, blocking until all bytes are read.

Readsb.length bytes from this file into the byte array, starting at the current file pointer.

Reads exactlylen bytes from this file into the byte array, starting at the current file pointer.

Reads four input bytes and returns anint value.

See the general contract of thereadInt method ofDataInput.

Reads a 32-bit int.

Reads a signed 32-bit integer from this file.

Reads a line of text.

Reads the next line of text from the input stream.

Read a line of text.

Reads the next line of text from this file.

Reads eight input bytes and returns along value.

See the general contract of thereadLong method ofDataInput.

Reads a 64-bit long.

Reads a signed 64-bit integer from this file.

Reads the requested number of bytes from the input stream into the given byte array.

Reads up to a specified number of bytes from the input stream.

Read and return an object.

Read an object from the ObjectInputStream.

This method is called by trusted subclasses of ObjectInputStream that constructed ObjectInputStream using the protected no-arg constructor.

Reads two input bytes and returns ashort value.

See the general contract of thereadShort method ofDataInput.

Reads a 16-bit short.

Reads a signed 16-bit number from this file.

The readStreamHeader method is provided to allow subclasses to read and verify their own stream headers.

Reads an "unshared" object from the ObjectInputStream.

Reads one input byte, zero-extends it to typeint, and returns the result, which is therefore in the range0 through255.

See the general contract of thereadUnsignedByte method ofDataInput.

Reads an unsigned 8-bit byte.

Reads an unsigned eight-bit number from this file.

Reads two input bytes and returns anint value in the range0 through65535.

See the general contract of thereadUnsignedShort method ofDataInput.

Reads an unsigned 16-bit short.

Reads an unsigned 16-bit number from this file.

Reads in a string that has been encoded using amodified UTF-8 format.

See the general contract of thereadUTF method ofDataInput.

Reads from the streamin a representation of a Unicode character string encoded inmodified UTF-8 format; this string of characters is then returned as aString.

Reads a String inmodified UTF-8 format.

Reads in a string from this file.

Tells whether this stream is ready to be read.

Tells whether this stream is ready to be read.

Tells whether this stream is ready to be read.

Tells whether this stream is ready to be read.

Tell whether this stream is ready to be read.

Tells whether this stream is ready to be read.

Tells whether this stream is ready to be read.

Tells whether this stream is ready to be read.

Receives a byte of data.

This method will allow trusted subclasses of ObjectOutputStream to substitute one object for another during serialization.

See the general contract of thereset method ofInputStream.

Resets the stream to the most recent mark.

Resets the stream to the most recent mark, or to the beginning if it has never been marked.

Repositions this stream to the position at the time themark method was last called on this input stream.

Resets the stream.

Repositions this stream to the position at the time themark method was last called on this input stream.

Repositions this stream to the position at the time themark method was last called on this input stream.

Reset the stream to the most recent mark.

Reset will disregard the state of any objects already written to the stream.

Repositions this stream to the position at the time themark method was last called on this input stream.

Resets the stream.

Resets the stream.

Resets the stream to the most recent mark, or to the beginning of the string if it has never been marked.

Load the local class equivalent of the specified stream class description.

This method will allow trusted subclasses of ObjectInputStream to substitute one object for another during deserialization.

Returns a proxy class that implements the interfaces named in a proxy class descriptor; subclasses may implement this method to read custom data from the stream along with the descriptors for dynamic proxy classes, allowing them to use an alternate loading mechanism for the interfaces and the proxy class.

Sets the file-pointer offset, measured from the beginning of this file, at which the next read or write occurs.

Sets the length of this file.

See the general contract of theskip method ofInputStream.

Skips characters.

Skips over and discardsn bytes of data from the input stream.

Skips over and discardsn bytes of data from the input stream.

Skips characters.

Skips over and discardsn bytes of data from this input stream.

Skips over and discardsn bytes of data from this input stream.

Skips n bytes of input.

Skips over and discardsn bytes of data from this input stream.

Skips characters.

Skips characters.

Makes an attempt to skip overn bytes of data from the input stream, discarding the skipped bytes.

See the general contract of theskipBytes method ofDataInput.

Skips bytes.

Attempts to skip overn bytes of input discarding the skipped bytes.

Skips over and discards exactlyn bytes of data from this input stream.

Reads all bytes from this input stream and writes the bytes to the given output stream in the order that they are read.

Reads all characters from this reader and writes the characters to the given writer in the order that they are read.

Pushes back an array of bytes by copying it to the front of the pushback buffer.

Pushes back a portion of an array of bytes by copying it to the front of the pushback buffer.

Pushes back a byte by copying it to the front of the pushback buffer.

Pushes back an array of characters by copying it to the front of the pushback buffer.

Pushes back a portion of an array of characters by copying it to the front of the pushback buffer.

Pushes back a single character by copying it to the front of the pushback buffer.

Specify stream protocol version to use when writing the stream.

Writeslen bytes from the specified byte array starting at offsetoff to this buffered output stream.

Writes the specified byte to this buffered output stream.

Writes a portion of an array of characters.

Writes a single character.

Writes a portion of a String.

Writes to the output stream all the bytes in arrayb.

Writeslen bytes from arrayb, in order, to the output stream.

Writes to the output stream the eight low-order bits of the argumentb.

Writeslen bytes from the specified byte array starting at offsetoff to the underlying output stream.

Writes the specified byte (the low eight bits of the argumentb) to the underlying output stream.

Writesb.length bytes from the specified byte array to this file output stream.

Writeslen bytes from the specified byte array starting at offsetoff to this file output stream.

Writes the specified byte to this file output stream.

Writesb.length bytes to this output stream.

Writeslen bytes from the specifiedbyte array starting at offsetoff to this output stream.

Writes the specifiedbyte to this output stream.

Writes a portion of an array of characters.

Writes a single character.

Writes a portion of a string.

Writes an array of bytes.

Writes a sub array of bytes.

Writes a byte.

Writes an array of bytes.

Writes a sub array of bytes.

Writes a byte.

Writesb.length bytes from the specified byte array to this output stream.

Writeslen bytes from the specified byte array starting at offsetoff to this output stream.

Writes the specified byte to this output stream.

Writes a portion of an array of characters.

Writes a single character.

Writes a portion of a string.

Writeslen bytes from the specified byte array starting at offsetoff to this piped output stream.

Writes the specifiedbyte to the piped output stream.

Writeslen characters from the specified character array starting at offsetoff to this piped output stream.

Writes the specifiedchar to the piped output stream.

Writes all bytes from the specified byte array to this stream.

Writesb.length bytes from the specified byte array to this file, starting at the current file pointer.

Writeslen bytes from the specified byte array starting at offsetoff to this file.

Writes the specified byte to this file.

Writes an array of characters.

Writes a portion of an array of characters.

Writes a single character.

Writes a string.

Writes a portion of a string.

Writes aboolean value to this output stream.

Writes aboolean to the underlying output stream as a 1-byte value.

Writes a boolean.

Writes aboolean to the file as a one-byte value.

Writes to the output stream the eight low-order bits of the argumentv.

Writes out abyte to the underlying output stream as a 1-byte value.

Writes an 8-bit byte.

Writes abyte to the file as a one-byte value.

Writes a string to the output stream.

Writes out the string to the underlying output stream as a sequence of bytes.

Writes a String as a sequence of bytes.

Writes the string to the file as a sequence of bytes.

Writes achar value, which is comprised of two bytes, to the output stream.

Writes achar to the underlying output stream as a 2-byte value, high byte first.

Writes a 16-bit char.

Writes achar to the file as a two-byte value, high byte first.

Writes every character in the strings, to the output stream, in order, two bytes per character.

Writes a string to the underlying output stream as a sequence of characters.

Writes a String as a sequence of chars.

Writes a string to the file as a sequence of characters.

Write the specified class descriptor to the ObjectOutputStream.

Writes adouble value, which is comprised of eight bytes, to the output stream.

Converts the double argument to along using thedoubleToLongBits method in classDouble, and then writes thatlong value to the underlying output stream as an 8-byte quantity, high byte first.

Writes a 64-bit double.

Converts the double argument to along using thedoubleToLongBits method in classDouble, and then writes thatlong value to the file as an eight-byte quantity, high byte first.

The object implements the writeExternal method to save its contents by calling the methods of DataOutput for its primitive values or calling the writeObject method of ObjectOutput for objects, strings, and arrays.

Write the buffered fields to the stream.

Writes afloat value, which is comprised of four bytes, to the output stream.

Converts the float argument to anint using thefloatToIntBits method in classFloat, and then writes thatint value to the underlying output stream as a 4-byte quantity, high byte first.

Writes a 32-bit float.

Converts the float argument to anint using thefloatToIntBits method in classFloat, and then writes thatint value to the file as a four-byte quantity, high byte first.

Writes anint value, which is comprised of four bytes, to the output stream.

Writes anint to the underlying output stream as four bytes, high byte first.

Writes a 32-bit int.

Writes anint to the file as four bytes, high byte first.

Writes along value, which is comprised of eight bytes, to the output stream.

Writes along to the underlying output stream as eight bytes, high byte first.

Writes a 64-bit long.

Writes along to the file as eight bytes, high byte first.

Write an object to the underlying storage or stream.

Write the specified object to the ObjectOutputStream.

Method used by subclasses to override the default writeObject method.

Writes two bytes to the output stream to represent the value of the argument.

Writes ashort to the underlying output stream as two bytes, high byte first.

Writes a 16-bit short.

Writes ashort to the file as two bytes, high byte first.

The writeStreamHeader method is provided so subclasses can append or prepend their own header to the stream.

Writes the complete contents of thisByteArrayOutputStream to the specified output stream argument, as if by calling the output stream's write method usingout.write(buf, 0, count).

Writes the contents of the buffer to another character stream.

Writes an "unshared" object to the ObjectOutputStream.

Writes two bytes of length information to the output stream, followed by themodified UTF-8 representation of every character in the strings.

Writes a string to the underlying output stream usingmodified UTF-8 encoding in a machine-independent manner.

Primitive data write of this String inmodified UTF-8 format.

Writes a string to the file usingmodified UTF-8 encoding in a machine-independent manner.

Constructs an instance of this class.

Constructs an instance of this class.

Creates a newFileReader, given theFile to read and thecharset.

Creates a newFileReader, given the name of the file to read and thecharset.

Constructs aFileWriter given theFile to write, using thedefault charset

Constructs aFileWriter given theFile to write and a boolean indicating whether to append the data written, using thedefault charset.

Constructs aFileWriter given theFile to write andcharset.

Constructs aFileWriter given theFile to write,charset and a boolean indicating whether to append the data written.

Constructs aFileWriter given a file name, using thedefault charset

Constructs aFileWriter given a file name and a boolean indicating whether to append the data written, using thedefault charset.

Constructs aFileWriter given a file name andcharset.

Constructs aFileWriter given a file name,charset and a boolean indicating whether to append the data written.

Provide a way for subclasses that are completely reimplementing ObjectInputStream to not have to allocate private data just used by this implementation of ObjectInputStream.

Creates an ObjectInputStream that reads from the specified InputStream.

Provide a way for subclasses that are completely reimplementing ObjectOutputStream to not have to allocate private data just used by this implementation of ObjectOutputStream.

Creates an ObjectOutputStream that writes to the specified OutputStream.

Creates aPipedInputStream so that it is connected to the piped output streamsrc.

Creates aPipedInputStream so that it is connected to the piped output streamsrc and uses the specified pipe size for the pipe's buffer.

Creates a piped output stream connected to the specified piped input stream.

Creates aPipedReader so that it is connected to the piped writersrc.

Creates aPipedReader so that it is connected to the piped writersrc and uses the specified pipe size for the pipe's buffer.

Creates a piped writer connected to the specified piped reader.

Creates a new print stream, without automatic line flushing, with the specified file and charset.

Creates a new print stream, without automatic line flushing, with the specified file name and charset.

Creates a new PrintWriter, without automatic line flushing, with the specified file and charset.

Creates a new PrintWriter, without automatic line flushing, with the specified file name and charset.

Appends the specified character to thisAppendable.

Appends the specified character sequence to thisAppendable.

Appends a subsequence of the specified character sequence to thisAppendable.

Executes the specified command and arguments in a separate process.

Executes the specified command and arguments in a separate process with the specified environment.

Executes the specified command and arguments in a separate process with the specified environment and working directory.

Returns a URL to a resource in a module defined to this class loader.

Returns an enumeration ofURL objects representing all the resources with the given name.

Returns an input stream for reading a resource in this module.

Finds all the resources with the given name.

Finds all resources of the specified name from the search path used to load classes.

Returns the channel inherited from the entity that created this Java virtual machine.

Attempts to read characters into the specified character buffer.

Starts a new process using the attributes of this process builder.

Starts a Process for each ProcessBuilder, creating a pipeline of processes linked by their standard output and standard input streams.

Builds a module descriptor into a file in a file system.

Builds a module descriptor into a file in a file system.

Builds aclass file into a file in a file system using the provided constant pool builder.

Builds aclass file into a file in a file system.

Parses aclass into aClassModel.

Verify aclass file.

Returns the platform MXBean proxy formxbeanInterface which is specified to have one single instance in a Java virtual machine and the proxy will forward the method calls through the givenMBeanServerConnection.

Returns the list of the platform MXBean proxies for forwarding the method calls of themxbeanInterface through the givenMBeanServerConnection.

Returns a proxy for a platform MXBean interface of a givenMXBean name that forwards its method calls through the givenMBeanServerConnection.

Closes the module reader.

Finds a resource, returning a URI to the resource in the module.

Lists the contents of the module, returning a stream of elements that are the names of all resources in the module.

Opens a resource, returning an input stream to read the resource in the module.

Opens the module content for reading.

Reads the binary form of a module declaration from an input stream as a module descriptor.

Reads the binary form of a module declaration from an input stream as a module descriptor.

Reads a resource, returning a byte buffer with the contents of the resource.

Signals that an error occurred while attempting to bind a socket to a local address and port.

Signals that an error occurred while attempting to connect a socket to a remote address and port.

Thrown to indicate that a HTTP request needs to be retried but cannot be retried automatically, due to streaming mode being enabled.

Thrown to indicate that a malformed URL has occurred.

Signals that an error occurred while attempting to connect a socket to a remote address and port.

Signals that an ICMP Port Unreachable message has been received on a connected datagram.

Thrown to indicate that there is an error in the underlying protocol, such as a TCP error.

Thrown to indicate that there is an error creating or accessing a Socket.

Signals that a timeout has occurred on a socket read or accept.

Thrown to indicate that the IP address of a host could not be determined.

Thrown to indicate that an unknown service exception has occurred.

Called to indicate that a connection could not be established to a proxy/socks server.

Listens for a connection to be made to this socket and accepts it.

Accepts a connection.

Returns the number of bytes that can be read from this socket without blocking.

Binds theServerSocket to a specific address (IP address and port number).

Binds theServerSocket to a specific address (IP address and port number).

Binds the socket to a local address.

Binds this socket to the specified local IP address and port number.

Closes this socket.

Closes this socket.

Closes this socket.

Closes this URLClassLoader, so that it can no longer be used to load new classes or resources that are defined by this loader.

Connects this socket to the server.

Connects this socket to the server with a specified timeout value.

Connects this socket to the specified port on the named host.

Connects this socket to the specified port number on the specified host.

Connects this socket to the specified port number on the specified host.

Opens a communications link to the resource referenced by this URL, if such a connection has not already been established.

Creates either a stream or a datagram socket.

Returns an Enumeration of URLs representing all of the resources on the URL search path having the specified name.

Gets all the applicable cookies from a cookie cache for the specified uri in the request header.

Retrieve the cached response based on the requesting uri, request method and request headers.

Return the Attributes object for this connection if the URL for it points to a JAR file entry, null otherwise.

Returns an OutputStream to which the response body can be written.

Returns the response body as an InputStream.

Returns the Certificate objects for this connection if the URL for it points to a JAR file entry, null otherwise.

Given a URL connect stream positioned at the beginning of the representation of an object, this method reads that stream and creates an object from it.

Given a URL connect stream positioned at the beginning of the representation of an object, this method reads that stream and creates an object that matches one of the types specified.

Gets the contents of this URL.

Gets the contents of this URL.

Retrieves the contents of this URL connection.

Retrieves the contents of this URL connection.

Returns the response headers as a Map.

Returns an input stream for this socket.

Returns an input stream for this socket.

Returns an input stream that reads from this open connection.

Return the JAR entry object for this connection, if any.

Return the JAR file for this connection.

Returns the main Attributes for the JAR file for this connection.

Returns the Manifest for this connection, or null if none.

Returns the value of a socket option.

Called to get a socket option.

Returns the value of a socket option.

Returns the value of a socket option.

Called to get a socket option.

Returns an output stream for this socket.

Returns an output stream for this socket.

Returns an output stream that writes to this connection.

Returns aSocketPermission object representing the permission necessary to connect to the destination host and port.

Returns a permission object representing the permission necessary to make the connection represented by this object.

Gets the status code from an HTTP response message.

Gets the HTTP response message, if any, returned along with the response code from a server.

Retrieve setting forSO_TIMEOUT. 0 returns implies that the option is disabled (i.e., timeout of infinity).

Retrieve the TTL (time-to-live) option.

Get the default time-to-live for multicast packets sent out on the socket.

Tries to determine the type of an input stream based on the characters at the beginning of the input stream.

Subclasses of ServerSocket use this method to override accept() to return their own subclass of socket.

Test whether that address is reachable.

Test whether that address is reachable.

Join the multicast group.

Joins a multicast group.

Join the multicast group.

Joins a multicast group.

Leave the multicast group.

Leave a multicast group on a specified local interface.

Leave the multicast group.

Leave a multicast group on a specified local interface.

Sets the maximum queue length for incoming connection indications (a request to connect) to thecount argument.

Returns aURLConnection instance that represents a connection to the remote object referred to by theURL.

Same asURL.openConnection(), except that the connection will be made through the specified proxy; Protocol handlers that do not support proxying will ignore the proxy parameter and make a normal connection.

Opens a connection to the object referenced by theURL argument.

Same as openConnection(URL), except that the connection will be made through the specified proxy; Protocol handlers that do not support proxying will ignore the proxy parameter and make a normal connection.

Opens a connection to thisURL and returns anInputStream for reading from that connection.

Peek at the packet to see who it is from.

Peek at the packet to see who it is from.

Sets all the applicable cookies, examples are response header fields that are named Set-Cookie2, present in the response headers into a cookie cache.

The protocol handler calls this method after a resource has been retrieved, and the ResponseCache must decide whether or not to store the resource in its cache.

Receives a datagram packet from this socket.

Receive the datagram packet.

Sends a datagram packet from this socket.

Sends a datagram packet.

Send one byte of urgent data on the socket.

Send one byte of urgent data on the socket.

Sets the value of a socket option.

Called to set a socket option.

Sets the value of a socket option.

Sets the value of a socket option.

Called to set a socket option.

Set the TTL (time-to-live) option.

Set the default time-to-live for multicast packets sent out on thisMulticastSocket in order to control the scope of the multicasts.

Places the input stream for this socket at "end of stream".

Places the input stream for this socket at "end of stream".

Disables the output stream for this socket.

Disables the output stream for this socket.

Constructs a multicast socket and binds it to any available port on the local host machine.

Constructs a multicast socket and binds it to the specified port on the local host machine.

Creates a multicast socket, bound to the specified local socket address.

Creates an unbound server socket.

Creates a server socket, bound to the specified port.

Creates a server socket and binds it to the specified local port number, with the specified backlog.

Create a server with the specified port, listen backlog, and local IP address to bind to.

Creates a stream socket and connects it to the specified port number on the named host.

Creates a socket and connects it to the specified remote host on the specified remote port.

Creates a stream socket and connects it to the specified port number at the specified IP address.

Creates a socket and connects it to the specified remote address on the specified remote port.

Thrown when a connection, over which anHttpRequest is intended to be sent, is not successfully established within a specified time period.

Thrown when a response is not received within a specified time period.

Thrown when the opening handshake has failed.

Sends the given request using this client, blocking if necessary to get the response.

Attempts to read characters into the specified character buffer.

Checked exception received by a thread when another thread closes the channel or the part of the channel upon which it is blocked in an I/O operation.

Checked exception received by a thread when another thread interrupts it while it is blocked in an I/O operation upon a channel.

Checked exception thrown when an attempt is made to invoke or complete an I/O operation upon channel that is closed, or at least closed to that operation.

Checked exception received by a thread when another thread interrupts it while it is waiting to acquire a file lock.

Checked exception received by a thread when a timeout elapses before an asynchronous operation completes.

Accepts a connection made to this channel's socket.

Binds the channel's socket to a local address and configures the socket to listen for connections.

Binds the channel's socket to a local address and configures the socket to listen for connections.

Binds the channel's socket to a local address.

Binds the channel's socket to a local address and configures the socket to listen for connections.