Nested Class Summary

Field Summary

Method Summary

Field Details

• in

  public static final InputStream in

  The "standard" input stream. This stream is already open and ready to supply input data. Typically this stream corresponds to keyboard input or another input source specified by the host environment or user. In case this stream is wrapped in aInputStreamReader,Console.charset() should be used for the charset, or consider usingConsole.reader().

  See Also:

  • Console.charset()
  • Console.reader()

• out

  public static final PrintStream out

  The "standard" output stream. This stream is already open and ready to accept output data. Typically this stream corresponds to display output or another output destination specified by the host environment or user. The encoding used in the conversion from characters to bytes is equivalent toConsole.charset() if theConsole exists,stdout.encoding otherwise.

  For simple stand-alone Java applications, a typical way to write a line of output data is:

       System.out.println(data)

  See theprintln methods in classPrintStream.

  See Also:

  • PrintStream.println()
  • PrintStream.println(boolean)
  • PrintStream.println(char)
  • PrintStream.println(char[])
  • PrintStream.println(double)
  • PrintStream.println(float)
  • PrintStream.println(int)
  • PrintStream.println(long)
  • PrintStream.println(java.lang.Object)
  • PrintStream.println(java.lang.String)
  • Console.charset()
  • stdout.encoding

• err

  public static final PrintStream err

  The "standard" error output stream. This stream is already open and ready to accept output data.

  Typically this stream corresponds to display output or another output destination specified by the host environment or user. By convention, this output stream is used to display error messages or other information that should come to the immediate attention of a user even if the principal output stream, the value of the variableout, has been redirected to a file or other destination that is typically not continuously monitored. The encoding used in the conversion from characters to bytes is equivalent toConsole.charset() if theConsole exists,stderr.encoding otherwise.

  See Also:

  • Console.charset()
  • stderr.encoding

Method Details

• setIn

  public static void setIn(InputStream in)

  Reassigns the "standard" input stream. First, if there is a security manager, itscheckPermission method is called with aRuntimePermission("setIO") permission to see if it's ok to reassign the "standard" input stream.

  Parameters:

  in - the new standard input stream.

  Throws:

  SecurityException - if a security manager exists and itscheckPermission method doesn't allow reassigning of the standard input stream.

  Since:

  1.1

  See Also:

  • SecurityManager.checkPermission(java.security.Permission)
  • RuntimePermission

• setOut

  public static void setOut(PrintStream out)

  Reassigns the "standard" output stream. First, if there is a security manager, itscheckPermission method is called with aRuntimePermission("setIO") permission to see if it's ok to reassign the "standard" output stream.

  Parameters:

  out - the new standard output stream

  Throws:

  SecurityException - if a security manager exists and itscheckPermission method doesn't allow reassigning of the standard output stream.

  Since:

  1.1

  See Also:

  • SecurityManager.checkPermission(java.security.Permission)
  • RuntimePermission

• setErr

  public static void setErr(PrintStream err)

  Reassigns the "standard" error output stream. First, if there is a security manager, itscheckPermission method is called with aRuntimePermission("setIO") permission to see if it's ok to reassign the "standard" error output stream.

  Parameters:

  err - the new standard error output stream.

  Throws:

  SecurityException - if a security manager exists and itscheckPermission method doesn't allow reassigning of the standard error output stream.

  Since:

  1.1

  See Also:

  • SecurityManager.checkPermission(java.security.Permission)
  • RuntimePermission

• console

  public static Console console()

  Returns the uniqueConsole object associated with the current Java virtual machine, if any.

  Returns:

  The system console, if any, otherwisenull.

  Since:

  1.6

• inheritedChannel

  public static Channel inheritedChannel() throwsIOException

  Returns the channel inherited from the entity that created this Java virtual machine. This method returns the channel obtained by invoking theinheritedChannel method of the system-wide defaultSelectorProvider object.

  In addition to the network-oriented channels described ininheritedChannel, this method may return other kinds of channels in the future.

  Returns:

  The inherited channel, if any, otherwisenull.

  Throws:

  IOException - If an I/O error occurs

  SecurityException - If a security manager is present and it does not permit access to the channel.

  Since:

  1.5

• setSecurityManager

  @Deprecated(since="17",forRemoval=true)public static void setSecurityManager(SecurityManager sm)

  Deprecated, for removal: This API element is subject to removal in a future version.

  This method is only useful in conjunction withthe Security Manager, which is deprecated and subject to removal in a future release. Consequently, this method is also deprecated and subject to removal. There is no replacement for the Security Manager or this method.

  Sets the system-wide security manager. If there is a security manager already installed, this method first calls the security manager'scheckPermission method with aRuntimePermission("setSecurityManager") permission to ensure it's ok to replace the existing security manager. This may result in throwing aSecurityException.

  Otherwise, the argument is established as the current security manager. If the argument isnull and no security manager has been established, then no action is taken and the method simply returns.

  Implementation Note:

  In the JDK implementation, if the Java virtual machine is started with the system propertyjava.security.manager not set or set to the special token "disallow" then thesetSecurityManager method cannot be used to set a security manager. See the followingsection of theSecurityManager class specification for more details.

  Parameters:

  sm - the security manager ornull

  Throws:

  SecurityException - if the security manager has already been set and its checkPermission method doesn't allow it to be replaced

  UnsupportedOperationException - ifsm is non-null and a security manager is not allowed to be set dynamically

  See Also:

  • getSecurityManager()
  • SecurityManager.checkPermission(java.security.Permission)
  • RuntimePermission

• getSecurityManager

  @Deprecated(since="17",forRemoval=true)public static SecurityManager getSecurityManager()

  Deprecated, for removal: This API element is subject to removal in a future version.

  This method is only useful in conjunction withthe Security Manager, which is deprecated and subject to removal in a future release. Consequently, this method is also deprecated and subject to removal. There is no replacement for the Security Manager or this method.

  Gets the system-wide security manager.

  Returns:

  if a security manager has already been established for the current application, then that security manager is returned; otherwise,null is returned.

  See Also:

  • setSecurityManager(java.lang.SecurityManager)

• currentTimeMillis

  public static long currentTimeMillis()

  Returns the current time in milliseconds. Note that while the unit of time of the return value is a millisecond, the granularity of the value depends on the underlying operating system and may be larger. For example, many operating systems measure time in units of tens of milliseconds.

  See the description of the classDate for a discussion of slight discrepancies that may arise between "computer time" and coordinated universal time (UTC).

  Returns:

  the difference, measured in milliseconds, between the current time and midnight, January 1, 1970 UTC.

  See Also:

  • Date

• nanoTime

  public static long nanoTime()

  Returns the current value of the running Java Virtual Machine's high-resolution time source, in nanoseconds. This method can only be used to measure elapsed time and is not related to any other notion of system or wall-clock time. The value returned represents nanoseconds since some fixed but arbitraryorigin time (perhaps in the future, so values may be negative). The same origin is used by all invocations of this method in an instance of a Java virtual machine; other virtual machine instances are likely to use a different origin.

  This method provides nanosecond precision, but not necessarily nanosecond resolution (that is, how frequently the value changes) - no guarantees are made except that the resolution is at least as good as that ofcurrentTimeMillis().

  Differences in successive calls that span greater than approximately 292 years (2⁶³ nanoseconds) will not correctly compute elapsed time due to numerical overflow.

  The values returned by this method become meaningful only when the difference between two such values, obtained within the same instance of a Java virtual machine, is computed.

  For example, to measure how long some code takes to execute:

   long startTime = System.nanoTime(); // ... the code being measured ... long elapsedNanos = System.nanoTime() - startTime;

  To compare elapsed time against a timeout, use

   if (System.nanoTime() - startTime >= timeoutNanos) ...

  instead of

   if (System.nanoTime() >= startTime + timeoutNanos) ...

  because of the possibility of numerical overflow.

  Returns:

  the current value of the running Java Virtual Machine's high-resolution time source, in nanoseconds

  Since:

  1.5

• arraycopy

  public static void arraycopy(Object src, int srcPos,Object dest, int destPos, int length)

  Copies an array from the specified source array, beginning at the specified position, to the specified position of the destination array. A subsequence of array components are copied from the source array referenced bysrc to the destination array referenced bydest. The number of components copied is equal to thelength argument. The components at positionssrcPos throughsrcPos+length-1 in the source array are copied into positionsdestPos throughdestPos+length-1, respectively, of the destination array.

  If thesrc anddest arguments refer to the same array object, then the copying is performed as if the components at positionssrcPos throughsrcPos+length-1 were first copied to a temporary array withlength components and then the contents of the temporary array were copied into positionsdestPos throughdestPos+length-1 of the destination array.

  Ifdest isnull, then aNullPointerException is thrown.

  Ifsrc isnull, then aNullPointerException is thrown and the destination array is not modified.

  Otherwise, if any of the following is true, anArrayStoreException is thrown and the destination is not modified:

  • Thesrc argument refers to an object that is not an array.
  • Thedest argument refers to an object that is not an array.
  • Thesrc argument anddest argument refer to arrays whose component types are different primitive types.
  • Thesrc argument refers to an array with a primitive component type and thedest argument refers to an array with a reference component type.
  • Thesrc argument refers to an array with a reference component type and thedest argument refers to an array with a primitive component type.

  Otherwise, if any of the following is true, anIndexOutOfBoundsException is thrown and the destination is not modified:

  • ThesrcPos argument is negative.
  • ThedestPos argument is negative.
  • Thelength argument is negative.
  • srcPos+length is greater thansrc.length, the length of the source array.
  • destPos+length is greater thandest.length, the length of the destination array.

  Otherwise, if any actual component of the source array from positionsrcPos throughsrcPos+length-1 cannot be converted to the component type of the destination array by assignment conversion, anArrayStoreException is thrown. In this case, letk be the smallest nonnegative integer less than length such thatsrc[srcPos+k] cannot be converted to the component type of the destination array; when the exception is thrown, source array components from positionssrcPos throughsrcPos+k-1 will already have been copied to destination array positionsdestPos throughdestPos+k-1 and no other positions of the destination array will have been modified. (Because of the restrictions already itemized, this paragraph effectively applies only to the situation where both arrays have component types that are reference types.)

  Parameters:

  src - the source array.

  srcPos - starting position in the source array.

  dest - the destination array.

  destPos - starting position in the destination data.

  length - the number of array elements to be copied.

  Throws:

  IndexOutOfBoundsException - if copying would cause access of data outside array bounds.

  ArrayStoreException - if an element in thesrc array could not be stored into thedest array because of a type mismatch.

  NullPointerException - if eithersrc ordest isnull.

• identityHashCode

  public static int identityHashCode(Object x)

  Returns the same hash code for the given object as would be returned by the default method hashCode(), whether or not the given object's class overrides hashCode(). The hash code for the null reference is zero.

  Parameters:

  x - object for which the hashCode is to be calculated

  Returns:

  the hashCode

  Since:

  1.1

  See Also:

  • Object.hashCode()
  • Objects.hashCode(Object)

• getProperties

  public static Properties getProperties()

  Determines the current system properties. First, if there is a security manager, itscheckPropertiesAccess method is called with no arguments. This may result in a security exception.

  The current set of system properties for use by thegetProperty(String) method is returned as aProperties object. If there is no current set of system properties, a set of system properties is first created and initialized. This set of system properties includes a value for each of the following keys unless the description of the associated value indicates that the value is optional.

  Shows property keys and associated values

  Key	Description of Associated Value
  java.version	Java Runtime Environment version, which may be interpreted as aRuntime.Version
  java.version.date	Java Runtime Environment version date, in ISO-8601 YYYY-MM-DD format, which may be interpreted as aLocalDate
  java.vendor	Java Runtime Environment vendor
  java.vendor.url	Java vendor URL
  java.vendor.version	Java vendor version(optional)
  java.home	Java installation directory
  java.vm.specification.version	Java Virtual Machine specification version, whose value is thefeature element of theruntime version
  java.vm.specification.vendor	Java Virtual Machine specification vendor
  java.vm.specification.name	Java Virtual Machine specification name
  java.vm.version	Java Virtual Machine implementation version which may be interpreted as aRuntime.Version
  java.vm.vendor	Java Virtual Machine implementation vendor
  java.vm.name	Java Virtual Machine implementation name
  java.specification.version	Java Runtime Environment specification version, whose value is thefeature element of theruntime version
  java.specification.maintenance.version	Java Runtime Environment specification maintenance version, may be interpreted as a positive integer(optional, see below)
  java.specification.vendor	Java Runtime Environment specification vendor
  java.specification.name	Java Runtime Environment specification name
  java.class.version	Java class format version number
  java.class.path	Java class path (refer toClassLoader.getSystemClassLoader() for details)
  java.library.path	List of paths to search when loading libraries
  java.io.tmpdir	Default temp file path
  java.compiler	Name of JIT compiler to use
  os.name	Operating system name
  os.arch	Operating system architecture
  os.version	Operating system version
  file.separator	File separator ("/" on UNIX)
  path.separator	Path separator (":" on UNIX)
  line.separator	Line separator ("\n" on UNIX)
  user.name	User's account name
  user.home	User's home directory
  user.dir	User's current working directory
  native.encoding	Character encoding name derived from the host environment and/or the user's settings. Setting this system property has no effect.
  stdout.encoding	Character encoding name forSystem.out. The Java runtime can be started with the system property set toUTF-8, starting it with the property set to another value leads to undefined behavior.
  stderr.encoding	Character encoding name forSystem.err. The Java runtime can be started with the system property set toUTF-8, starting it with the property set to another value leads to undefined behavior.

  Thejava.specification.maintenance.version property is defined if the specification implemented by this runtime at the time of its construction had undergone amaintenance release. When defined, its value identifies that maintenance release. To indicate the first maintenance release this property will have the value"1", to indicate the second maintenance release this property will have the value"2", and so on.

  Multiple paths in a system property value are separated by the path separator character of the platform.

  Note that even if the security manager does not permit thegetProperties operation, it may choose to permit thegetProperty(String) operation.

  API Note:

  Changing a standard system property may have unpredictable results unless otherwise specified. Property values may be cached during initialization or on first use. Setting a standard property after initialization usinggetProperties(),setProperties(Properties),setProperty(String, String), orclearProperty(String) may not have the desired effect.

  Implementation Note:

  In addition to the standard system properties, the system properties may include the following keys:

  Shows property keys and associated values

  Key	Description of Associated Value
  jdk.module.path	The application module path
  jdk.module.upgrade.path	The upgrade module path
  jdk.module.main	The module name of the initial/main module
  jdk.module.main.class	The main class name of the initial module
  file.encoding	The name of the default charset, defaults toUTF-8. The property may be set on the command line to the valueUTF-8 orCOMPAT. If set on the command line to the valueCOMPAT then the value is replaced with the value of thenative.encoding property during startup. Setting the property to a value other thanUTF-8 orCOMPAT leads to unspecified behavior.

  Returns:

  the system properties

  Throws:

  SecurityException - if a security manager exists and itscheckPropertiesAccess method doesn't allow access to the system properties.

  See Also:

  • setProperties(java.util.Properties)
  • SecurityException
  • SecurityManager.checkPropertiesAccess()
  • Properties

• lineSeparator

  public static String lineSeparator()

  Returns the system-dependent line separator string. It always returns the same value - the initial value of thesystem propertyline.separator.

  On UNIX systems, it returns"\n"; on Microsoft Windows systems it returns"\r\n".

  Returns:

  the system-dependent line separator string

  Since:

  1.7

• setProperties

  public static void setProperties(Properties props)

  Sets the system properties to theProperties argument. First, if there is a security manager, itscheckPropertiesAccess method is called with no arguments. This may result in a security exception.

  The argument becomes the current set of system properties for use by thegetProperty(String) method. If the argument isnull, then the current set of system properties is forgotten.

  API Note:

  Changing a standard system property may have unpredictable results unless otherwise specified. SeegetProperties for details.

  Parameters:

  props - the new system properties.

  Throws:

  SecurityException - if a security manager exists and itscheckPropertiesAccess method doesn't allow access to the system properties.

  See Also:

  • getProperties()
  • Properties
  • SecurityException
  • SecurityManager.checkPropertiesAccess()

• getProperty

  public static String getProperty(String key)

  Gets the system property indicated by the specified key. First, if there is a security manager, itscheckPropertyAccess method is called with the key as its argument. This may result in a SecurityException.

  If there is no current set of system properties, a set of system properties is first created and initialized in the same manner as for thegetProperties method.

  API Note:

  Changing a standard system property may have unpredictable results unless otherwise specified. SeegetProperties for details.

  Parameters:

  key - the name of the system property.

  Returns:

  the string value of the system property, ornull if there is no property with that key.

  Throws:

  SecurityException - if a security manager exists and itscheckPropertyAccess method doesn't allow access to the specified system property.

  NullPointerException - ifkey isnull.

  IllegalArgumentException - ifkey is empty.

  See Also:

  • setProperty(java.lang.String, java.lang.String)
  • SecurityException
  • SecurityManager.checkPropertyAccess(java.lang.String)
  • getProperties()

• getProperty

  public static String getProperty(String key,String def)

  Gets the system property indicated by the specified key. First, if there is a security manager, itscheckPropertyAccess method is called with thekey as its argument.

  If there is no current set of system properties, a set of system properties is first created and initialized in the same manner as for thegetProperties method.

  Parameters:

  key - the name of the system property.

  def - a default value.

  Returns:

  the string value of the system property, or the default value if there is no property with that key.

  Throws:

  SecurityException - if a security manager exists and itscheckPropertyAccess method doesn't allow access to the specified system property.

  NullPointerException - ifkey isnull.

  IllegalArgumentException - ifkey is empty.

  See Also:

  • setProperty(java.lang.String, java.lang.String)
  • SecurityManager.checkPropertyAccess(java.lang.String)
  • getProperties()

• setProperty

  public static String setProperty(String key,String value)

  Sets the system property indicated by the specified key. First, if a security manager exists, itsSecurityManager.checkPermission method is called with aPropertyPermission(key, "write") permission. This may result in a SecurityException being thrown. If no exception is thrown, the specified property is set to the given value.

  API Note:

  Changing a standard system property may have unpredictable results unless otherwise specified. SeegetProperties for details.

  Parameters:

  key - the name of the system property.

  value - the value of the system property.

  Returns:

  the previous value of the system property, ornull if it did not have one.

  Throws:

  SecurityException - if a security manager exists and itscheckPermission method doesn't allow setting of the specified property.

  NullPointerException - ifkey orvalue isnull.

  IllegalArgumentException - ifkey is empty.

  Since:

  1.2

  See Also:

  • getProperty(java.lang.String)
  • getProperty(java.lang.String)
  • getProperty(java.lang.String, java.lang.String)
  • PropertyPermission
  • SecurityManager.checkPermission(java.security.Permission)

• clearProperty

  public static String clearProperty(String key)

  Removes the system property indicated by the specified key. First, if a security manager exists, itsSecurityManager.checkPermission method is called with aPropertyPermission(key, "write") permission. This may result in a SecurityException being thrown. If no exception is thrown, the specified property is removed.

  API Note:

  Changing a standard system property may have unpredictable results unless otherwise specified. SeegetProperties method for details.

  Parameters:

  key - the name of the system property to be removed.

  Returns:

  the previous string value of the system property, ornull if there was no property with that key.

  Throws:

  SecurityException - if a security manager exists and itscheckPropertyAccess method doesn't allow access to the specified system property.

  NullPointerException - ifkey isnull.

  IllegalArgumentException - ifkey is empty.

  Since:

  1.5

  See Also:

  • getProperty(java.lang.String)
  • setProperty(java.lang.String, java.lang.String)
  • Properties
  • SecurityException
  • SecurityManager.checkPropertiesAccess()

• getenv

  public static String getenv(String name)

  Gets the value of the specified environment variable. An environment variable is a system-dependent external named value.

  If a security manager exists, itscheckPermission method is called with aRuntimePermission("getenv."+name) permission. This may result in aSecurityException being thrown. If no exception is thrown the value of the variablename is returned.

  System properties andenvironment variables are both conceptually mappings between names and values. Both mechanisms can be used to pass user-defined information to a Java process. Environment variables have a more global effect, because they are visible to all descendants of the process which defines them, not just the immediate Java subprocess. They can have subtly different semantics, such as case insensitivity, on different operating systems. For these reasons, environment variables are more likely to have unintended side effects. It is best to use system properties where possible. Environment variables should be used when a global effect is desired, or when an external system interface requires an environment variable (such asPATH).

  On UNIX systems the alphabetic case ofname is typically significant, while on Microsoft Windows systems it is typically not. For example, the expressionSystem.getenv("FOO").equals(System.getenv("foo")) is likely to be true on Microsoft Windows.

  Parameters:

  name - the name of the environment variable

  Returns:

  the string value of the variable, ornull if the variable is not defined in the system environment

  Throws:

  NullPointerException - ifname isnull

  SecurityException - if a security manager exists and itscheckPermission method doesn't allow access to the environment variablename

  See Also:

  • getenv()
  • ProcessBuilder.environment()

• getenv

  public static Map<String,String> getenv()

  Returns an unmodifiable string map view of the current system environment. The environment is a system-dependent mapping from names to values which is passed from parent to child processes.

  If the system does not support environment variables, an empty map is returned.

  The returned map will never contain null keys or values. Attempting to query the presence of a null key or value will throw aNullPointerException. Attempting to query the presence of a key or value which is not of typeString will throw aClassCastException.

  The returned map and its collection views may not obey the general contract of theObject.equals(java.lang.Object) andObject.hashCode() methods.

  The returned map is typically case-sensitive on all platforms.

  If a security manager exists, itscheckPermission method is called with aRuntimePermission("getenv.*") permission. This may result in aSecurityException being thrown.

  When passing information to a Java subprocess,system properties are generally preferred over environment variables.

  Returns:

  the environment as a map of variable names to values

  Throws:

  SecurityException - if a security manager exists and itscheckPermission method doesn't allow access to the process environment

  Since:

  1.5

  See Also:

  • getenv(String)
  • ProcessBuilder.environment()

• getLogger

  public static System.Logger getLogger(String name)

  Returns an instance ofLogger for the caller's use.

  API Note:

  This method may defer calling theLoggerFinder.getLogger method to create an actual logger supplied by the logging backend, for instance, to allow loggers to be obtained during the system initialization time.

  Implementation Requirements:

  Instances returned by this method route messages to loggers obtained by callingLoggerFinder.getLogger(name, module), wheremodule is the caller's module. In cases whereSystem.getLogger is called from a context where there is no caller frame on the stack (e.g when called directly from a JNI attached thread),IllegalCallerException is thrown. To obtain a logger in such a context, use an auxiliary class that will implicitly be identified as the caller, or use the systemLoggerFinder to obtain a logger instead. Note that doing the latter may eagerly initialize the underlying logging system.

  Parameters:

  name - the name of the logger.

  Returns:

  an instance ofSystem.Logger that can be used by the calling class.

  Throws:

  NullPointerException - ifname isnull.

  IllegalCallerException - if there is no Java caller frame on the stack.

  Since:

  9

• getLogger

  public static System.Logger getLogger(String name,ResourceBundle bundle)

  Returns a localizable instance ofLogger for the caller's use. The returned logger will use the provided resource bundle for message localization.

  API Note:

  This method is intended to be used after the system is fully initialized. This method may trigger the immediate loading and initialization of theSystem.LoggerFinder service, which may cause issues if the Java Runtime is not ready to initialize the concrete service implementation yet. System classes which may be loaded early in the boot sequence and need to log localized messages should create a logger usinggetLogger(java.lang.String) and then use the log methods that take a resource bundle as parameter.

  Implementation Requirements:

  The returned logger will perform message localization as specified byLoggerFinder.getLocalizedLogger(name, bundle, module), wheremodule is the caller's module. In cases whereSystem.getLogger is called from a context where there is no caller frame on the stack (e.g when called directly from a JNI attached thread),IllegalCallerException is thrown. To obtain a logger in such a context, use an auxiliary class that will implicitly be identified as the caller, or use the systemLoggerFinder to obtain a logger instead. Note that doing the latter may eagerly initialize the underlying logging system.

  Parameters:

  name - the name of the logger.

  bundle - a resource bundle.

  Returns:

  an instance ofSystem.Logger which will use the provided resource bundle for message localization.

  Throws:

  NullPointerException - ifname isnull orbundle isnull.

  IllegalCallerException - if there is no Java caller frame on the stack.

  Since:

  9

• exit

  public static void exit(int status)

  Initiates theshutdown sequence of the Java Virtual Machine. This method always blocks indefinitely. The argument serves as a status code; by convention, a nonzero status code indicates abnormal termination.

  This method calls theexit method in classRuntime. This method never returns normally.

  The callSystem.exit(n) is effectively equivalent to the call:

   Runtime.getRuntime().exit(n)

  Parameters:

  status - exit status.

  Throws:

  SecurityException - if a security manager exists and itscheckExit method doesn't allow exit with the specified status.

  See Also:

  • Runtime.exit(int)

• gc

  public static void gc()

  Runs the garbage collector in the Java Virtual Machine.

  Calling thegc method suggests that the Java Virtual Machine expend effort toward recycling unused objects in order to make the memory they currently occupy available for reuse by the Java Virtual Machine. When control returns from the method call, the Java Virtual Machine has made a best effort to reclaim space from all unused objects. There is no guarantee that this effort will recycle any particular number of unused objects, reclaim any particular amount of space, or complete at any particular time, if at all, before the method returns or ever. There is also no guarantee that this effort will determine the change of reachability in any particular number of objects, or that any particular number ofReference objects will be cleared and enqueued.

  The callSystem.gc() is effectively equivalent to the call:

   Runtime.getRuntime().gc()

  See Also:

  • Runtime.gc()

• runFinalization

  @Deprecated(since="18",forRemoval=true)public static void runFinalization()

  Deprecated, for removal: This API element is subject to removal in a future version.

  Finalization has been deprecated for removal. SeeObject.finalize() for background information and details about migration options.

  When running in a JVM in which finalization has been disabled or removed, no objects will be pending finalization, so this method does nothing.

  Runs the finalization methods of any objects pending finalization. Calling this method suggests that the Java Virtual Machine expend effort toward running thefinalize methods of objects that have been found to be discarded but whosefinalize methods have not yet been run. When control returns from the method call, the Java Virtual Machine has made a best effort to complete all outstanding finalizations.

  The callSystem.runFinalization() is effectively equivalent to the call:

   Runtime.getRuntime().runFinalization()

  SeeJava Language Specification:

  12.6 Finalization of Class Instances
  

  See Also:

  • Runtime.runFinalization()

• load

  public static void load(String filename)

  Loads the native library specified by the filename argument. The filename argument must be an absolute path name. If the filename argument, when stripped of any platform-specific library prefix, path, and file extension, indicates a library whose name is, for example, L, and a native library called L is statically linked with the VM, then the JNI_OnLoad_L function exported by the library is invoked rather than attempting to load a dynamic library. A filename matching the argument does not have to exist in the file system. See the JNI Specification for more details. Otherwise, the filename argument is mapped to a native library image in an implementation-dependent manner.

  The callSystem.load(name) is effectively equivalent to the call:

   Runtime.getRuntime().load(name)

  Parameters:

  filename - the file to load.

  Throws:

  SecurityException - if a security manager exists and itscheckLink method doesn't allow loading of the specified dynamic library

  UnsatisfiedLinkError - if either the filename is not an absolute path name, the native library is not statically linked with the VM, or the library cannot be mapped to a native library image by the host system.

  NullPointerException - iffilename isnull

  See Also:

  • Runtime.load(java.lang.String)
  • SecurityManager.checkLink(java.lang.String)

• loadLibrary

  public static void loadLibrary(String libname)

  Loads the native library specified by thelibname argument. Thelibname argument must not contain any platform specific prefix, file extension or path. If a native library calledlibname is statically linked with the VM, then the JNI_OnLoad_libname function exported by the library is invoked. See the JNI Specification for more details. Otherwise, the libname argument is loaded from a system library location and mapped to a native library image in an implementation-dependent manner.

  The callSystem.loadLibrary(name) is effectively equivalent to the call

   Runtime.getRuntime().loadLibrary(name)

  Parameters:

  libname - the name of the library.

  Throws:

  SecurityException - if a security manager exists and itscheckLink method doesn't allow loading of the specified dynamic library

  UnsatisfiedLinkError - if either the libname argument contains a file path, the native library is not statically linked with the VM, or the library cannot be mapped to a native library image by the host system.

  NullPointerException - iflibname isnull

  See Also:

  • Runtime.loadLibrary(java.lang.String)
  • SecurityManager.checkLink(java.lang.String)

• mapLibraryName

  public static String mapLibraryName(String libname)

  Maps a library name into a platform-specific string representing a native library.

  Parameters:

  libname - the name of the library.

  Returns:

  a platform-dependent native library name.

  Throws:

  NullPointerException - iflibname isnull

  Since:

  1.2

  See Also:

  • loadLibrary(java.lang.String)
  • ClassLoader.findLibrary(java.lang.String)