Movatterモバイル変換

Nested Class Summary

Method Summary

• Methods declared in interface java.util.stream.BaseStream

  close,isParallel,iterator,onClose,parallel,sequential,spliterator,unordered

Method Detail

• filter

  LongStream filter​(LongPredicate predicate)

  Returns a stream consisting of the elements of this stream that match the given predicate.

  This is anintermediate operation.

  Parameters:

  predicate - anon-interfering,stateless predicate to apply to each element to determine if it should be included

  Returns:

  the new stream

• map

  LongStream map​(LongUnaryOperator mapper)

  Returns a stream consisting of the results of applying the given function to the elements of this stream.

  This is anintermediate operation.

  Parameters:

  mapper - anon-interfering,stateless function to apply to each element

  Returns:

  the new stream

• mapToObj

  <U> Stream<U> mapToObj​(LongFunction<? extends U> mapper)

  Returns an object-valuedStream consisting of the results of applying the given function to the elements of this stream.

  This is an intermediate operation.

  Type Parameters:

  U - the element type of the new stream

  Parameters:

  mapper - anon-interfering,stateless function to apply to each element

  Returns:

  the new stream

• mapToInt

  IntStream mapToInt​(LongToIntFunction mapper)

  Returns anIntStream consisting of the results of applying the given function to the elements of this stream.

  This is anintermediate operation.

  Parameters:

  mapper - anon-interfering,stateless function to apply to each element

  Returns:

  the new stream

• mapToDouble

  DoubleStream mapToDouble​(LongToDoubleFunction mapper)

  Returns aDoubleStream consisting of the results of applying the given function to the elements of this stream.

  This is anintermediate operation.

  Parameters:

  mapper - anon-interfering,stateless function to apply to each element

  Returns:

  the new stream

• flatMap

  LongStream flatMap​(LongFunction<? extendsLongStream> mapper)

  Returns a stream consisting of the results of replacing each element of this stream with the contents of a mapped stream produced by applying the provided mapping function to each element. Each mapped stream isclosed after its contents have been placed into this stream. (If a mapped stream isnull an empty stream is used, instead.)

  This is anintermediate operation.

  Parameters:

  mapper - anon-interfering,stateless function to apply to each element which produces aLongStream of new values

  Returns:

  the new stream

  See Also:

  Stream.flatMap(Function)

• distinct

  LongStream distinct()

  Returns a stream consisting of the distinct elements of this stream.

  This is astateful intermediate operation.

  Returns:

  the new stream

• sorted

  LongStream sorted()

  Returns a stream consisting of the elements of this stream in sorted order.

  This is astateful intermediate operation.

  Returns:

  the new stream

• peek

  LongStream peek​(LongConsumer action)

  Returns a stream consisting of the elements of this stream, additionally performing the provided action on each element as elements are consumed from the resulting stream.

  This is anintermediate operation.

  For parallel stream pipelines, the action may be called at whatever time and in whatever thread the element is made available by the upstream operation. If the action modifies shared state, it is responsible for providing the required synchronization.

  API Note:

  This method exists mainly to support debugging, where you want to see the elements as they flow past a certain point in a pipeline:

       LongStream.of(1, 2, 3, 4)         .filter(e -> e > 2)         .peek(e -> System.out.println("Filtered value: " + e))         .map(e -> e * e)         .peek(e -> System.out.println("Mapped value: " + e))         .sum();

  In cases where the stream implementation is able to optimize away the production of some or all the elements (such as with short-circuiting operations likefindFirst, or in the example described incount()), the action will not be invoked for those elements.

  Parameters:

  action - a non-interfering action to perform on the elements as they are consumed from the stream

  Returns:

  the new stream

• limit

  LongStream limit​(long maxSize)

  Returns a stream consisting of the elements of this stream, truncated to be no longer thanmaxSize in length.

  This is ashort-circuiting stateful intermediate operation.

  API Note:

  Whilelimit() is generally a cheap operation on sequential stream pipelines, it can be quite expensive on ordered parallel pipelines, especially for large values ofmaxSize, sincelimit(n) is constrained to return not just anyn elements, but thefirst n elements in the encounter order. Using an unordered stream source (such asgenerate(LongSupplier)) or removing the ordering constraint withBaseStream.unordered() may result in significant speedups oflimit() in parallel pipelines, if the semantics of your situation permit. If consistency with encounter order is required, and you are experiencing poor performance or memory utilization withlimit() in parallel pipelines, switching to sequential execution withBaseStream.sequential() may improve performance.

  Parameters:

  maxSize - the number of elements the stream should be limited to

  Returns:

  the new stream

  Throws:

  IllegalArgumentException - ifmaxSize is negative

• skip

  LongStream skip​(long n)

  Returns a stream consisting of the remaining elements of this stream after discarding the firstn elements of the stream. If this stream contains fewer thann elements then an empty stream will be returned.

  This is astateful intermediate operation.

  API Note:

  Whileskip() is generally a cheap operation on sequential stream pipelines, it can be quite expensive on ordered parallel pipelines, especially for large values ofn, sinceskip(n) is constrained to skip not just anyn elements, but thefirst n elements in the encounter order. Using an unordered stream source (such asgenerate(LongSupplier)) or removing the ordering constraint withBaseStream.unordered() may result in significant speedups ofskip() in parallel pipelines, if the semantics of your situation permit. If consistency with encounter order is required, and you are experiencing poor performance or memory utilization withskip() in parallel pipelines, switching to sequential execution withBaseStream.sequential() may improve performance.

  Parameters:

  n - the number of leading elements to skip

  Returns:

  the new stream

  Throws:

  IllegalArgumentException - ifn is negative

• takeWhile

  default LongStream takeWhile​(LongPredicate predicate)

  Returns, if this stream is ordered, a stream consisting of the longest prefix of elements taken from this stream that match the given predicate. Otherwise returns, if this stream is unordered, a stream consisting of a subset of elements taken from this stream that match the given predicate.

  If this stream is ordered then the longest prefix is a contiguous sequence of elements of this stream that match the given predicate. The first element of the sequence is the first element of this stream, and the element immediately following the last element of the sequence does not match the given predicate.

  If this stream is unordered, and some (but not all) elements of this stream match the given predicate, then the behavior of this operation is nondeterministic; it is free to take any subset of matching elements (which includes the empty set).

  Independent of whether this stream is ordered or unordered if all elements of this stream match the given predicate then this operation takes all elements (the result is the same as the input), or if no elements of the stream match the given predicate then no elements are taken (the result is an empty stream).

  This is ashort-circuiting stateful intermediate operation.

  API Note:

  WhiletakeWhile() is generally a cheap operation on sequential stream pipelines, it can be quite expensive on ordered parallel pipelines, since the operation is constrained to return not just any valid prefix, but the longest prefix of elements in the encounter order. Using an unordered stream source (such asgenerate(LongSupplier)) or removing the ordering constraint withBaseStream.unordered() may result in significant speedups oftakeWhile() in parallel pipelines, if the semantics of your situation permit. If consistency with encounter order is required, and you are experiencing poor performance or memory utilization withtakeWhile() in parallel pipelines, switching to sequential execution withBaseStream.sequential() may improve performance.

  Implementation Requirements:

  The default implementation obtains thespliterator of this stream, wraps that spliterator so as to support the semantics of this operation on traversal, and returns a new stream associated with the wrapped spliterator. The returned stream preserves the execution characteristics of this stream (namely parallel or sequential execution as perBaseStream.isParallel()) but the wrapped spliterator may choose to not support splitting. When the returned stream is closed, the close handlers for both the returned and this stream are invoked.

  Parameters:

  predicate - anon-interfering,stateless predicate to apply to elements to determine the longest prefix of elements.

  Returns:

  the new stream

  Since:

  9

• dropWhile

  default LongStream dropWhile​(LongPredicate predicate)

  Returns, if this stream is ordered, a stream consisting of the remaining elements of this stream after dropping the longest prefix of elements that match the given predicate. Otherwise returns, if this stream is unordered, a stream consisting of the remaining elements of this stream after dropping a subset of elements that match the given predicate.

  If this stream is ordered then the longest prefix is a contiguous sequence of elements of this stream that match the given predicate. The first element of the sequence is the first element of this stream, and the element immediately following the last element of the sequence does not match the given predicate.

  If this stream is unordered, and some (but not all) elements of this stream match the given predicate, then the behavior of this operation is nondeterministic; it is free to drop any subset of matching elements (which includes the empty set).

  Independent of whether this stream is ordered or unordered if all elements of this stream match the given predicate then this operation drops all elements (the result is an empty stream), or if no elements of the stream match the given predicate then no elements are dropped (the result is the same as the input).

  This is astateful intermediate operation.

  API Note:

  WhiledropWhile() is generally a cheap operation on sequential stream pipelines, it can be quite expensive on ordered parallel pipelines, since the operation is constrained to return not just any valid prefix, but the longest prefix of elements in the encounter order. Using an unordered stream source (such asgenerate(LongSupplier)) or removing the ordering constraint withBaseStream.unordered() may result in significant speedups ofdropWhile() in parallel pipelines, if the semantics of your situation permit. If consistency with encounter order is required, and you are experiencing poor performance or memory utilization withdropWhile() in parallel pipelines, switching to sequential execution withBaseStream.sequential() may improve performance.

  Implementation Requirements:

  The default implementation obtains thespliterator of this stream, wraps that spliterator so as to support the semantics of this operation on traversal, and returns a new stream associated with the wrapped spliterator. The returned stream preserves the execution characteristics of this stream (namely parallel or sequential execution as perBaseStream.isParallel()) but the wrapped spliterator may choose to not support splitting. When the returned stream is closed, the close handlers for both the returned and this stream are invoked.

  Parameters:

  predicate - anon-interfering,stateless predicate to apply to elements to determine the longest prefix of elements.

  Returns:

  the new stream

  Since:

  9

• forEach

  void forEach​(LongConsumer action)

  Performs an action for each element of this stream.

  This is aterminal operation.

  For parallel stream pipelines, this operation doesnot guarantee to respect the encounter order of the stream, as doing so would sacrifice the benefit of parallelism. For any given element, the action may be performed at whatever time and in whatever thread the library chooses. If the action accesses shared state, it is responsible for providing the required synchronization.

  Parameters:

  action - a non-interfering action to perform on the elements

• forEachOrdered

  void forEachOrdered​(LongConsumer action)

  Performs an action for each element of this stream, guaranteeing that each element is processed in encounter order for streams that have a defined encounter order.

  This is aterminal operation.

  Parameters:

  action - a non-interfering action to perform on the elements

  See Also:

  forEach(LongConsumer)

• toArray

  long[] toArray()

  Returns an array containing the elements of this stream.

  This is aterminal operation.

  Returns:

  an array containing the elements of this stream

• reduce

  long reduce​(long identity,LongBinaryOperator op)

  Performs areduction on the elements of this stream, using the provided identity value and anassociative accumulation function, and returns the reduced value. This is equivalent to:

       long result = identity;     for (long element : this stream)         result = accumulator.applyAsLong(result, element)     return result;

  but is not constrained to execute sequentially.

  Theidentity value must be an identity for the accumulator function. This means that for allx,accumulator.apply(identity, x) is equal tox. Theaccumulator function must be anassociative function.

  This is aterminal operation.

  API Note:

  Sum, min, max, and average are all special cases of reduction. Summing a stream of numbers can be expressed as:

       long sum = integers.reduce(0, (a, b) -> a+b);

  or more compactly:

       long sum = integers.reduce(0, Long::sum);

  While this may seem a more roundabout way to perform an aggregation compared to simply mutating a running total in a loop, reduction operations parallelize more gracefully, without needing additional synchronization and with greatly reduced risk of data races.

  Parameters:

  identity - the identity value for the accumulating function

  op - anassociative,non-interfering,stateless function for combining two values

  Returns:

  the result of the reduction

  See Also:

  sum(),min(),max(),average()

• reduce

  OptionalLong reduce​(LongBinaryOperator op)

  Performs areduction on the elements of this stream, using anassociative accumulation function, and returns anOptionalLong describing the reduced value, if any. This is equivalent to:

       boolean foundAny = false;     long result = null;     for (long element : this stream) {         if (!foundAny) {             foundAny = true;             result = element;         }         else             result = accumulator.applyAsLong(result, element);     }     return foundAny ? OptionalLong.of(result) : OptionalLong.empty();

  but is not constrained to execute sequentially.

  Theaccumulator function must be anassociative function.

  This is aterminal operation.

  Parameters:

  op - anassociative,non-interfering,stateless function for combining two values

  Returns:

  the result of the reduction

  See Also:

  reduce(long, LongBinaryOperator)

• collect

  <R> R collect​(Supplier<R> supplier,ObjLongConsumer<R> accumulator,BiConsumer<R,​R> combiner)

  Performs amutable reduction operation on the elements of this stream. A mutable reduction is one in which the reduced value is a mutable result container, such as anArrayList, and elements are incorporated by updating the state of the result rather than by replacing the result. This produces a result equivalent to:

       R result = supplier.get();     for (long element : this stream)         accumulator.accept(result, element);     return result;

  Likereduce(long, LongBinaryOperator),collect operations can be parallelized without requiring additional synchronization.

  This is aterminal operation.

  Type Parameters:

  R - the type of the mutable result container

  Parameters:

  supplier - a function that creates a new mutable result container. For a parallel execution, this function may be called multiple times and must return a fresh value each time.

  accumulator - anassociative,non-interfering,stateless function that must fold an element into a result container.

  combiner - anassociative,non-interfering,stateless function that accepts two partial result containers and merges them, which must be compatible with the accumulator function. The combiner function must fold the elements from the second result container into the first result container.

  Returns:

  the result of the reduction

  See Also:

  Stream.collect(Supplier, BiConsumer, BiConsumer)

• sum

  long sum()

  Returns the sum of elements in this stream. This is a special case of areduction and is equivalent to:

       return reduce(0, Long::sum);

  This is aterminal operation.

  Returns:

  the sum of elements in this stream

• min

  OptionalLong min()

  Returns anOptionalLong describing the minimum element of this stream, or an empty optional if this stream is empty. This is a special case of areduction and is equivalent to:

       return reduce(Long::min);

  This is aterminal operation.

  Returns:

  anOptionalLong containing the minimum element of this stream, or an emptyOptionalLong if the stream is empty

• max

  OptionalLong max()

  Returns anOptionalLong describing the maximum element of this stream, or an empty optional if this stream is empty. This is a special case of areduction and is equivalent to:

       return reduce(Long::max);

  This is aterminal operation.

  Returns:

  anOptionalLong containing the maximum element of this stream, or an emptyOptionalLong if the stream is empty

• count

  long count()

  Returns the count of elements in this stream. This is a special case of areduction and is equivalent to:

       return map(e -> 1L).sum();

  This is aterminal operation.

  API Note:

  An implementation may choose to not execute the stream pipeline (either sequentially or in parallel) if it is capable of computing the count directly from the stream source. In such cases no source elements will be traversed and no intermediate operations will be evaluated. Behavioral parameters with side-effects, which are strongly discouraged except for harmless cases such as debugging, may be affected. For example, consider the following stream:

       LongStream s = LongStream.of(1, 2, 3, 4);     long count = s.peek(System.out::println).count();

  The number of elements covered by the stream source is known and the intermediate operation,peek, does not inject into or remove elements from the stream (as may be the case forflatMap orfilter operations). Thus the count is 4 and there is no need to execute the pipeline and, as a side-effect, print out the elements.

  Returns:

  the count of elements in this stream

• average

  OptionalDouble average()

  Returns anOptionalDouble describing the arithmetic mean of elements of this stream, or an empty optional if this stream is empty. This is a special case of areduction.

  This is aterminal operation.

  Returns:

  anOptionalDouble containing the average element of this stream, or an empty optional if the stream is empty

• summaryStatistics

  LongSummaryStatistics summaryStatistics()

  Returns aLongSummaryStatistics describing various summary data about the elements of this stream. This is a special case of areduction.

  This is aterminal operation.

  Returns:

  aLongSummaryStatistics describing various summary data about the elements of this stream

• anyMatch

  boolean anyMatch​(LongPredicate predicate)

  Returns whether any elements of this stream match the provided predicate. May not evaluate the predicate on all elements if not necessary for determining the result. If the stream is empty thenfalse is returned and the predicate is not evaluated.

  This is ashort-circuiting terminal operation.

  API Note:

  This method evaluates theexistential quantification of the predicate over the elements of the stream (for some x P(x)).

  Parameters:

  predicate - anon-interfering,stateless predicate to apply to elements of this stream

  Returns:

  true if any elements of the stream match the provided predicate, otherwisefalse

• allMatch

  boolean allMatch​(LongPredicate predicate)

  Returns whether all elements of this stream match the provided predicate. May not evaluate the predicate on all elements if not necessary for determining the result. If the stream is empty thentrue is returned and the predicate is not evaluated.

  This is ashort-circuiting terminal operation.

  API Note:

  This method evaluates theuniversal quantification of the predicate over the elements of the stream (for all x P(x)). If the stream is empty, the quantification is said to bevacuously satisfied and is alwaystrue (regardless of P(x)).

  Parameters:

  predicate - anon-interfering,stateless predicate to apply to elements of this stream

  Returns:

  true if either all elements of the stream match the provided predicate or the stream is empty, otherwisefalse

• noneMatch

  boolean noneMatch​(LongPredicate predicate)

  Returns whether no elements of this stream match the provided predicate. May not evaluate the predicate on all elements if not necessary for determining the result. If the stream is empty thentrue is returned and the predicate is not evaluated.

  This is ashort-circuiting terminal operation.

  API Note:

  This method evaluates theuniversal quantification of the negated predicate over the elements of the stream (for all x ~P(x)). If the stream is empty, the quantification is said to be vacuously satisfied and is alwaystrue, regardless of P(x).

  Parameters:

  predicate - anon-interfering,stateless predicate to apply to elements of this stream

  Returns:

  true if either no elements of the stream match the provided predicate or the stream is empty, otherwisefalse

• findFirst

  OptionalLong findFirst()

  Returns anOptionalLong describing the first element of this stream, or an emptyOptionalLong if the stream is empty. If the stream has no encounter order, then any element may be returned.

  This is ashort-circuiting terminal operation.

  Returns:

  anOptionalLong describing the first element of this stream, or an emptyOptionalLong if the stream is empty

• findAny

  OptionalLong findAny()

  Returns anOptionalLong describing some element of the stream, or an emptyOptionalLong if the stream is empty.

  This is ashort-circuiting terminal operation.

  The behavior of this operation is explicitly nondeterministic; it is free to select any element in the stream. This is to allow for maximal performance in parallel operations; the cost is that multiple invocations on the same source may not return the same result. (If a stable result is desired, usefindFirst() instead.)

  Returns:

  anOptionalLong describing some element of this stream, or an emptyOptionalLong if the stream is empty

  See Also:

  findFirst()

• asDoubleStream

  DoubleStream asDoubleStream()

  Returns aDoubleStream consisting of the elements of this stream, converted todouble.

  This is anintermediate operation.

  Returns:

  aDoubleStream consisting of the elements of this stream, converted todouble

• boxed

  Stream<Long> boxed()

  Returns aStream consisting of the elements of this stream, each boxed to aLong.

  This is anintermediate operation.

  Returns:

  aStream consistent of the elements of this stream, each boxed toLong

• builder

  static LongStream.Builder builder()

  Returns a builder for aLongStream.

  Returns:

  a stream builder

• empty

  static LongStream empty()

  Returns an empty sequentialLongStream.

  Returns:

  an empty sequential stream

• of

  static LongStream of​(long t)

  Returns a sequentialLongStream containing a single element.

  Parameters:

  t - the single element

  Returns:

  a singleton sequential stream

• of

  static LongStream of​(long... values)

  Returns a sequential ordered stream whose elements are the specified values.

  Parameters:

  values - the elements of the new stream

  Returns:

  the new stream

• iterate

  static LongStream iterate​(long seed,LongUnaryOperator f)

  Returns an infinite sequential orderedLongStream produced by iterative application of a functionf to an initial elementseed, producing aStream consisting ofseed,f(seed),f(f(seed)), etc.

  The first element (position0) in theLongStream will be the providedseed. Forn > 0, the element at positionn, will be the result of applying the functionf to the element at positionn - 1.

  The action of applyingf for one elementhappens-before the action of applyingf for subsequent elements. For any given element the action may be performed in whatever thread the library chooses.

  Parameters:

  seed - the initial element

  f - a function to be applied to the previous element to produce a new element

  Returns:

  a new sequentialLongStream

• iterate

  static LongStream iterate​(long seed,LongPredicate hasNext,LongUnaryOperator next)

  Returns a sequential orderedLongStream produced by iterative application of the givennext function to an initial element, conditioned on satisfying the givenhasNext predicate. The stream terminates as soon as thehasNext predicate returns false.

  LongStream.iterate should produce the same sequence of elements as produced by the corresponding for-loop:

       for (long index=seed; hasNext.test(index); index = next.applyAsLong(index)) {         ...     }

  The resulting sequence may be empty if thehasNext predicate does not hold on the seed value. Otherwise the first element will be the suppliedseed value, the next element (if present) will be the result of applying thenext function to theseed value, and so on iteratively until thehasNext predicate indicates that the stream should terminate.

  The action of applying thehasNext predicate to an elementhappens-before the action of applying thenext function to that element. The action of applying thenext function for one elementhappens-before the action of applying thehasNext predicate for subsequent elements. For any given element an action may be performed in whatever thread the library chooses.

  Parameters:

  seed - the initial element

  hasNext - a predicate to apply to elements to determine when the stream must terminate.

  next - a function to be applied to the previous element to produce a new element

  Returns:

  a new sequentialLongStream

  Since:

  9

• generate

  static LongStream generate​(LongSupplier s)

  Returns an infinite sequential unordered stream where each element is generated by the providedLongSupplier. This is suitable for generating constant streams, streams of random elements, etc.

  Parameters:

  s - theLongSupplier for generated elements

  Returns:

  a new infinite sequential unorderedLongStream

• range

  static LongStream range​(long startInclusive,                        long endExclusive)

  Returns a sequential orderedLongStream fromstartInclusive (inclusive) toendExclusive (exclusive) by an incremental step of1.

  API Note:

  An equivalent sequence of increasing values can be produced sequentially using afor loop as follows:

       for (long i = startInclusive; i < endExclusive ; i++) { ... }

  Parameters:

  startInclusive - the (inclusive) initial value

  endExclusive - the exclusive upper bound

  Returns:

  a sequentialLongStream for the range oflong elements

• rangeClosed

  static LongStream rangeClosed​(long startInclusive,                              long endInclusive)

  Returns a sequential orderedLongStream fromstartInclusive (inclusive) toendInclusive (inclusive) by an incremental step of1.

  API Note:

  An equivalent sequence of increasing values can be produced sequentially using afor loop as follows:

       for (long i = startInclusive; i <= endInclusive ; i++) { ... }

  Parameters:

  startInclusive - the (inclusive) initial value

  endInclusive - the inclusive upper bound

  Returns:

  a sequentialLongStream for the range oflong elements

• concat

  static LongStream concat​(LongStream a,LongStream b)

  Creates a lazily concatenated stream whose elements are all the elements of the first stream followed by all the elements of the second stream. The resulting stream is ordered if both of the input streams are ordered, and parallel if either of the input streams is parallel. When the resulting stream is closed, the close handlers for both input streams are invoked.

  This method operates on the two input streams and binds each stream to its source. As a result subsequent modifications to an input stream source may not be reflected in the concatenated stream result.

  API Note:

  To preserve optimization opportunities this method binds each stream to its source and accepts only two streams as parameters. For example, the exact size of the concatenated stream source can be computed if the exact size of each input stream source is known. To concatenate more streams without binding, or without nested calls to this method, try creating a stream of streams and flat-mapping with the identity function, for example:

       LongStream concat = Stream.of(s1, s2, s3, s4).flatMapToLong(s -> s);

  Implementation Note:

  Use caution when constructing streams from repeated concatenation. Accessing an element of a deeply concatenated stream can result in deep call chains, or evenStackOverflowError.

  Parameters:

  a - the first stream

  b - the second stream

  Returns:

  the concatenation of the two input streams