Description

An advancedVariant type. All classes in the engine inherit from Object. Each class may define new properties, methods or signals, which are available to all inheriting classes. For example, aSprite2D instance is able to callNode.add_child() because it inherits fromNode.

You can create new instances, usingObject.new() in GDScript, ornewGodotObject in C#.

To delete an Object instance, callfree(). This is necessary for most classes inheriting Object, because they do not manage memory on their own, and will otherwise cause memory leaks when no longer in use. There are a few classes that perform memory management. For example,RefCounted (and by extensionResource) deletes itself when no longer referenced, andNode deletes its children when freed.

Objects can have aScript attached to them. Once theScript is instantiated, it effectively acts as an extension to the base class, allowing it to define and inherit new properties, methods and signals.

Inside aScript,_get_property_list() may be overridden to customize properties in several ways. This allows them to be available to the editor, display as lists of options, sub-divide into groups, save on disk, etc. Scripting languages offer easier ways to customize properties, such as with the@GDScript.@export annotation.

Godot is very dynamic. An object's script, and therefore its properties, methods and signals, can be changed at run-time. Because of this, there can be occasions where, for example, a property required by a method may not exist. To prevent run-time errors, see methods such asset(),get(),call(),has_method(),has_signal(), etc. Note that these methods aremuch slower than direct references.

In GDScript, you can also check if a given property, method, or signal name exists in an object with thein operator:

varnode=Node.new()print("name"innode)# Prints trueprint("get_parent"innode)# Prints trueprint("tree_entered"innode)# Prints trueprint("unknown"innode)# Prints false

Notifications areint constants commonly sent and received by objects. For example, on every rendered frame, theSceneTree notifies nodes inside the tree with aNode.NOTIFICATION_PROCESS. The nodes receive it and may callNode._process() to update. To make use of notifications, seenotification() and_notification().

Lastly, every object can also contain metadata (data about data).set_meta() can be useful to store information that the object itself does not depend on. To keep your code clean, making excessive use of metadata is discouraged.

Note: Unlike references to aRefCounted, references to an object stored in a variable can become invalid without being set tonull. To check if an object has been deleted, donot compare it againstnull. Instead, use@GlobalScope.is_instance_valid(). It's also recommended to inherit fromRefCounted for classes storing data instead ofObject.

Note: Thescript is not exposed like most properties. To set or get an object'sScript in code, useset_script() andget_script(), respectively.

Note: In a boolean context, anObject will evaluate tofalse if it is equal tonull or it has been freed. Otherwise, anObject will always evaluate totrue. See also@GlobalScope.is_instance_valid().

Tutorials

• Object class introduction

• When and how to avoid using nodes for everything

• Object notifications

Methods

Signals

property_list_changed()🔗

Emitted whennotify_property_list_changed() is called.

script_changed()🔗

Emitted when the object's script is changed.

Note: When this signal is emitted, the new script is not initialized yet. If you need to access the new script, defer connections to this signal withCONNECT_DEFERRED.

Enumerations

enumConnectFlags:🔗

ConnectFlagsCONNECT_DEFERRED =1

Deferred connections trigger theirCallables on idle time (at the end of the frame), rather than instantly.

ConnectFlagsCONNECT_PERSIST =2

Persisting connections are stored when the object is serialized (such as when usingPackedScene.pack()). In the editor, connections created through the Node dock are always persisting.

ConnectFlagsCONNECT_ONE_SHOT =4

One-shot connections disconnect themselves after emission.

ConnectFlagsCONNECT_REFERENCE_COUNTED =8

Reference-counted connections can be assigned to the sameCallable multiple times. Each disconnection decreases the internal counter. The signal fully disconnects only when the counter reaches 0.

ConnectFlagsCONNECT_APPEND_SOURCE_OBJECT =16

The source object is automatically bound when aPackedScene is instantiated. If this flag bit is enabled, the source object will be appended right after the original arguments of the signal.

Constants

NOTIFICATION_POSTINITIALIZE =0🔗

Notification received when the object is initialized, before its script is attached. Used internally.

NOTIFICATION_PREDELETE =1🔗

Notification received when the object is about to be deleted. Can be used like destructors in object-oriented programming languages.

NOTIFICATION_EXTENSION_RELOADED =2🔗

Notification received when the object finishes hot reloading. This notification is only sent for extensions classes and derived.

Method Descriptions

Variant_get(property:StringName)virtual🔗

Override this method to customize the behavior ofget(). Should return the givenproperty's value, ornull if theproperty should be handled normally.

Combined with_set() and_get_property_list(), this method allows defining custom properties, which is particularly useful for editor plugins.

Note: This method is not called when getting built-in properties of an object, including properties defined with@GDScript.@export.

func_get(property):ifproperty=="fake_property":print("Getting my property!")return4func_get_property_list():return[{"name":"fake_property","type":TYPE_INT}]

publicoverrideVariant_Get(StringNameproperty){if(property=="FakeProperty"){GD.Print("Getting my property!");return4;}returndefault;}publicoverrideGodot.Collections.Array<Godot.Collections.Dictionary>_GetPropertyList(){return[        new Godot.Collections.Dictionary()        {            { "name", "FakeProperty" },            { "type", (int)Variant.Type.Int },        },    ];}

Array[Dictionary]_get_property_list()virtual🔗

Override this method to provide a custom list of additional properties to handle by the engine.

Should return a property list, as anArray of dictionaries. The result is added to the array ofget_property_list(), and should be formatted in the same way. EachDictionary must at least contain thename andtype entries.

You can use_property_can_revert() and_property_get_revert() to customize the default values of the properties added by this method.

The example below displays a list of numbers shown as words going fromZERO toFIVE, withnumber_count controlling the size of the list:

@toolextendsNode@exportvarnumber_count=3:set(nc):number_count=ncnumbers.resize(number_count)notify_property_list_changed()varnumbers=PackedInt32Array([0,0,0])func_get_property_list():varproperties=[]foriinrange(number_count):properties.append({"name":"number_%d"%i,"type":TYPE_INT,"hint":PROPERTY_HINT_ENUM,"hint_string":"ZERO,ONE,TWO,THREE,FOUR,FIVE",})returnpropertiesfunc_get(property):ifproperty.begins_with("number_"):varindex=property.get_slice("_",1).to_int()returnnumbers[index]func_set(property,value):ifproperty.begins_with("number_"):varindex=property.get_slice("_",1).to_int()numbers[index]=valuereturntruereturnfalse

[Tool]publicpartialclassMyNode:Node{privateint_numberCount;[Export]publicintNumberCount{get=>_numberCount;set{_numberCount=value;_numbers.Resize(_numberCount);NotifyPropertyListChanged();}}privateGodot.Collections.Array<int>_numbers=[];publicoverrideGodot.Collections.Array<Godot.Collections.Dictionary>_GetPropertyList(){Godot.Collections.Array<Godot.Collections.Dictionary>properties=[];for(inti=0;i<_numberCount;i++){properties.Add(newGodot.Collections.Dictionary(){{"name",$"number_{i}"},{"type",(int)Variant.Type.Int},{"hint",(int)PropertyHint.Enum},{"hint_string","Zero,One,Two,Three,Four,Five"},});}returnproperties;}publicoverrideVariant_Get(StringNameproperty){stringpropertyName=property.ToString();if(propertyName.StartsWith("number_")){intindex=int.Parse(propertyName.Substring("number_".Length));return_numbers[index];}returndefault;}publicoverridebool_Set(StringNameproperty,Variantvalue){stringpropertyName=property.ToString();if(propertyName.StartsWith("number_")){intindex=int.Parse(propertyName.Substring("number_".Length));_numbers[index]=value.As<int>();returntrue;}returnfalse;}}

Note: This method is intended for advanced purposes. For most common use cases, the scripting languages offer easier ways to handle properties. See@GDScript.@export,@GDScript.@export_enum,@GDScript.@export_group, etc. If you want to customize exported properties, use_validate_property().

Note: If the object's script is not@GDScript.@tool, this method will not be called in the editor.

void_init()virtual🔗

Called when the object's script is instantiated, oftentimes after the object is initialized in memory (throughObject.new() in GDScript, ornewGodotObject in C#). It can be also defined to take in parameters. This method is similar to a constructor in most programming languages.

Note: If_init() is defined withrequired parameters, the Object with script may only be created directly. If any other means (such asPackedScene.instantiate() orNode.duplicate()) are used, the script's initialization will fail.

Variant_iter_get(iter:Variant)virtual🔗

Returns the current iterable value.iter stores the iteration state, but unlike_iter_init() and_iter_next() the state is supposed to be read-only, so there is noArray wrapper.

Tip: In GDScript, you can use a subtype ofVariant as the return type for_iter_get(). The specified type will be used to set the type of the iterator variable infor loops, enhancing type safety.

bool_iter_init(iter:Array)virtual🔗

Initializes the iterator.iter stores the iteration state. Since GDScript does not support passing arguments by reference, a single-element array is used as a wrapper. Returnstrue so long as the iterator has not reached the end.

classMyRange:var_fromvar_tofunc_init(from,to):assert(from<=to)_from=from_to=tofunc_iter_init(iter):iter[0]=_fromreturniter[0]<_tofunc_iter_next(iter):iter[0]+=1returniter[0]<_tofunc_iter_get(iter):returniterfunc_ready():varmy_range=MyRange.new(2,5)forxinmy_range:print(x)# Prints 2, 3, 4.

Note: Alternatively, you can ignoreiter and use the object's state instead, seeonline docs for an example. Note that in this case you will not be able to reuse the same iterator instance in nested loops. Also, make sure you reset the iterator state in this method if you want to reuse the same instance multiple times.

bool_iter_next(iter:Array)virtual🔗

Moves the iterator to the next iteration.iter stores the iteration state. Since GDScript does not support passing arguments by reference, a single-element array is used as a wrapper. Returnstrue so long as the iterator has not reached the end.

void_notification(what:int)virtual🔗

Called when the object receives a notification, which can be identified inwhat by comparing it with a constant. See alsonotification().

func_notification(what):ifwhat==NOTIFICATION_PREDELETE:print("Goodbye!")

publicoverridevoid_Notification(intwhat){if(what==NotificationPredelete){GD.Print("Goodbye!");}}

Note: The baseObject defines a few notifications (NOTIFICATION_POSTINITIALIZE andNOTIFICATION_PREDELETE). Inheriting classes such asNode define a lot more notifications, which are also received by this method.

Note: Unlike other virtual methods, this method is called automatically for every script that overrides it. This means that the base implementation should not be called viasuper in GDScript or its equivalents in other languages.

bool_property_can_revert(property:StringName)virtual🔗

Override this method to customize the givenproperty's revert behavior. Should returntrue if theproperty has a custom default value and is revertible in the Inspector dock. Use_property_get_revert() to specify theproperty's default value.

Note: This method must return consistently, regardless of the current value of theproperty.

Variant_property_get_revert(property:StringName)virtual🔗

Override this method to customize the givenproperty's revert behavior. Should return the default value for theproperty. If the default value differs from theproperty's current value, a revert icon is displayed in the Inspector dock.

Note:_property_can_revert() must also be overridden for this method to be called.

bool_set(property:StringName, value:Variant)virtual🔗

Override this method to customize the behavior ofset(). Should set theproperty tovalue and returntrue, orfalse if theproperty should be handled normally. Theexact way to set theproperty is up to this method's implementation.

Combined with_get() and_get_property_list(), this method allows defining custom properties, which is particularly useful for editor plugins.

Note: This method is not called when setting built-in properties of an object, including properties defined with@GDScript.@export.

varinternal_data={}func_set(property,value):ifproperty=="fake_property":# Storing the value in the fake property.internal_data["fake_property"]=valuereturntruereturnfalsefunc_get_property_list():return[{"name":"fake_property","type":TYPE_INT}]

privateGodot.Collections.Dictionary_internalData=newGodot.Collections.Dictionary();publicoverridebool_Set(StringNameproperty,Variantvalue){if(property=="FakeProperty"){// Storing the value in the fake property._internalData["FakeProperty"]=value;returntrue;}returnfalse;}publicoverrideGodot.Collections.Array<Godot.Collections.Dictionary>_GetPropertyList(){return[        new Godot.Collections.Dictionary()        {            { "name", "FakeProperty" },            { "type", (int)Variant.Type.Int },        },    ];}

String_to_string()virtual🔗

Override this method to customize the return value ofto_string(), and therefore the object's representation as aString.

func_to_string():return"Welcome to Godot 4!"func_init():print(self)# Prints "Welcome to Godot 4!"vara=str(self)# a is "Welcome to Godot 4!"

void_validate_property(property:Dictionary)virtual🔗

Override this method to customize existing properties. Every property info goes through this method, except properties added with_get_property_list(). The dictionary contents is the same as in_get_property_list().

@toolextendsNode@exportvaris_number_editable:bool:set(value):is_number_editable=valuenotify_property_list_changed()@exportvarnumber:intfunc_validate_property(property:Dictionary):ifproperty.name=="number"andnotis_number_editable:property.usage|=PROPERTY_USAGE_READ_ONLY

[Tool]publicpartialclassMyNode:Node{privatebool_isNumberEditable;[Export]publicboolIsNumberEditable{get=>_isNumberEditable;set{_isNumberEditable=value;NotifyPropertyListChanged();}}[Export]publicintNumber{get;set;}publicoverridevoid_ValidateProperty(Godot.Collections.Dictionaryproperty){if(property["name"].AsStringName()==PropertyName.Number&&!IsNumberEditable){varusage=property["usage"].As<PropertyUsageFlags>()|PropertyUsageFlags.ReadOnly;property["usage"]=(int)usage;}}}

voidadd_user_signal(signal:String, arguments:Array = [])🔗

Adds a user-defined signal namedsignal. Optional arguments for the signal can be added as anArray of dictionaries, each defining anameString and atypeint (seeVariant.Type). See alsohas_user_signal() andremove_user_signal().

add_user_signal("hurt",[{"name":"damage","type":TYPE_INT},{"name":"source","type":TYPE_OBJECT}])

AddUserSignal("Hurt",[    new Godot.Collections.Dictionary()    {        { "name", "damage" },        { "type", (int)Variant.Type.Int },    },    new Godot.Collections.Dictionary()    {        { "name", "source" },        { "type", (int)Variant.Type.Object },    },]);

Variantcall(method:StringName, ...)vararg🔗

Calls themethod on the object and returns the result. This method supports a variable number of arguments, so parameters can be passed as a comma separated list.

varnode=Node3D.new()node.call("rotate",Vector3(1.0,0.0,0.0),1.571)

varnode=newNode3D();node.Call(Node3D.MethodName.Rotate,newVector3(1f,0f,0f),1.571f);

Note: In C#,method must be in snake_case when referring to built-in Godot methods. Prefer using the names exposed in theMethodName class to avoid allocating a newStringName on each call.

Variantcall_deferred(method:StringName, ...)vararg🔗

Calls themethod on the object during idle time. Always returnsnull,not the method's result.

Idle time happens mainly at the end of process and physics frames. In it, deferred calls will be run until there are none left, which means you can defer calls from other deferred calls and they'll still be run in the current idle time cycle. This means you should not call a method deferred from itself (or from a method called by it), as this causes infinite recursion the same way as if you had called the method directly.

This method supports a variable number of arguments, so parameters can be passed as a comma separated list.

varnode=Node3D.new()node.call_deferred("rotate",Vector3(1.0,0.0,0.0),1.571)

varnode=newNode3D();node.CallDeferred(Node3D.MethodName.Rotate,newVector3(1f,0f,0f),1.571f);

See alsoCallable.call_deferred().

Note: In C#,method must be in snake_case when referring to built-in Godot methods. Prefer using the names exposed in theMethodName class to avoid allocating a newStringName on each call.

Note: If you're looking to delay the function call by a frame, refer to theSceneTree.process_frame andSceneTree.physics_frame signals.

varnode=Node3D.new()# Make a Callable and bind the arguments to the node's rotate() call.varcallable=node.rotate.bind(Vector3(1.0,0.0,0.0),1.571)# Connect the callable to the process_frame signal, so it gets called in the next process frame.# CONNECT_ONE_SHOT makes sure it only gets called once instead of every frame.get_tree().process_frame.connect(callable,CONNECT_ONE_SHOT)

Variantcallv(method:StringName, arg_array:Array)🔗

Calls themethod on the object and returns the result. Unlikecall(), this method expects all parameters to be contained insidearg_array.

varnode=Node3D.new()node.callv("rotate",[Vector3(1.0,0.0,0.0),1.571])

varnode=newNode3D();node.Callv(Node3D.MethodName.Rotate,[newVector3(1f,0f,0f),1.571f]);

Note: In C#,method must be in snake_case when referring to built-in Godot methods. Prefer using the names exposed in theMethodName class to avoid allocating a newStringName on each call.

boolcan_translate_messages()const🔗

Returnstrue if the object is allowed to translate messages withtr() andtr_n(). See alsoset_message_translation().

voidcancel_free()🔗

If this method is called duringNOTIFICATION_PREDELETE, this object will reject being freed and will remain allocated. This is mostly an internal function used for error handling to avoid the user from freeing objects when they are not intended to.

Errorconnect(signal:StringName, callable:Callable, flags:int = 0)🔗

Connects asignal by name to acallable. Optionalflags can be also added to configure the connection's behavior (seeConnectFlags constants).

A signal can only be connected once to the sameCallable. If the signal is already connected, this method returns@GlobalScope.ERR_INVALID_PARAMETER and generates an error, unless the signal is connected withCONNECT_REFERENCE_COUNTED. To prevent this, useis_connected() first to check for existing connections.

Note: If thecallable's object is freed, the connection will be lost.

Note: In GDScript, it is generally recommended to connect signals withSignal.connect() instead.

Note: This operation (and all other signal related operations) is thread-safe.

voiddisconnect(signal:StringName, callable:Callable)🔗

Disconnects asignal by name from a givencallable. If the connection does not exist, generates an error. Useis_connected() to make sure that the connection exists.

Erroremit_signal(signal:StringName, ...)vararg🔗

Emits the givensignal by name. The signal must exist, so it should be a built-in signal of this class or one of its inherited classes, or a user-defined signal (seeadd_user_signal()). This method supports a variable number of arguments, so parameters can be passed as a comma separated list.

Returns@GlobalScope.ERR_UNAVAILABLE ifsignal does not exist or the parameters are invalid.

emit_signal("hit","sword",100)emit_signal("game_over")

EmitSignal(SignalName.Hit,"sword",100);EmitSignal(SignalName.GameOver);

Note: In C#,signal must be in snake_case when referring to built-in Godot signals. Prefer using the names exposed in theSignalName class to avoid allocating a newStringName on each call.

voidfree()🔗

Deletes the object from memory. Pre-existing references to the object become invalid, and any attempt to access them will result in a runtime error. Checking the references with@GlobalScope.is_instance_valid() will returnfalse. This is equivalent to thememdelete function in GDExtension C++.

Variantget(property:StringName)const🔗

Returns theVariant value of the givenproperty. If theproperty does not exist, this method returnsnull.

varnode=Node2D.new()node.rotation=1.5vara=node.get("rotation")# a is 1.5

varnode=newNode2D();node.Rotation=1.5f;vara=node.Get(Node2D.PropertyName.Rotation);// a is 1.5

Note: In C#,property must be in snake_case when referring to built-in Godot properties. Prefer using the names exposed in thePropertyName class to avoid allocating a newStringName on each call.

Stringget_class()const🔗

Returns the object's built-in class name, as aString. See alsois_class().

Note: This method ignoresclass_name declarations. If this object's script has defined aclass_name, the base, built-in class name is returned instead.

Array[Dictionary]get_incoming_connections()const🔗

Returns anArray of signal connections received by this object. Each connection is represented as aDictionary that contains three entries:

• signal is a reference to theSignal;

• callable is a reference to theCallable;

• flags is a combination ofConnectFlags.

Variantget_indexed(property_path:NodePath)const🔗

Gets the object's property indexed by the givenproperty_path. The path should be aNodePath relative to the current object and can use the colon character (:) to access nested properties.

Examples:"position:x" or"material:next_pass:blend_mode".

varnode=Node2D.new()node.position=Vector2(5,-10)vara=node.get_indexed("position")# a is Vector2(5, -10)varb=node.get_indexed("position:y")# b is -10

varnode=newNode2D();node.Position=newVector2(5,-10);vara=node.GetIndexed("position");// a is Vector2(5, -10)varb=node.GetIndexed("position:y");// b is -10

Note: In C#,property_path must be in snake_case when referring to built-in Godot properties. Prefer using the names exposed in thePropertyName class to avoid allocating a newStringName on each call.

Note: This method does not support actual paths to nodes in theSceneTree, only sub-property paths. In the context of nodes, useNode.get_node_and_resource() instead.

intget_instance_id()const🔗

Returns the object's unique instance ID. This ID can be saved inEncodedObjectAsID, and can be used to retrieve this object instance with@GlobalScope.instance_from_id().

Note: This ID is only useful during the current session. It won't correspond to a similar object if the ID is sent over a network, or loaded from a file at a later time.

Variantget_meta(name:StringName, default:Variant = null)const🔗

Returns the object's metadata value for the given entryname. If the entry does not exist, returnsdefault. Ifdefault isnull, an error is also generated.

Note: A metadata's name must be a valid identifier as perStringName.is_valid_identifier() method.

Note: Metadata that has a name starting with an underscore (_) is considered editor-only. Editor-only metadata is not displayed in the Inspector and should not be edited, although it can still be found by this method.

Array[StringName]get_meta_list()const🔗

Returns the object's metadata entry names as anArray ofStringNames.

intget_method_argument_count(method:StringName)const🔗

Returns the number of arguments of the givenmethod by name.

Note: In C#,method must be in snake_case when referring to built-in Godot methods. Prefer using the names exposed in theMethodName class to avoid allocating a newStringName on each call.

Array[Dictionary]get_method_list()const🔗

Returns this object's methods and their signatures as anArray of dictionaries. EachDictionary contains the following entries:

• name is the name of the method, as aString;

• args is anArray of dictionaries representing the arguments;

• default_args is the default arguments as anArray of variants;

• flags is a combination ofMethodFlags;

• id is the method's internal identifierint;

• return is the returned value, as aDictionary;

Note: The dictionaries ofargs andreturn are formatted identically to the results ofget_property_list(), although not all entries are used.

Array[Dictionary]get_property_list()const🔗

Returns the object's property list as anArray of dictionaries. EachDictionary contains the following entries:

• name is the property's name, as aString;

• class_name is an emptyStringName, unless the property is@GlobalScope.TYPE_OBJECT and it inherits from a class;

• type is the property's type, as anint (seeVariant.Type);

• hint ishow the property is meant to be edited (seePropertyHint);

• hint_string depends on the hint (seePropertyHint);

• usage is a combination ofPropertyUsageFlags.

Note: In GDScript, all class members are treated as properties. In C# and GDExtension, it may be necessary to explicitly mark class members as Godot properties using decorators or attributes.

Variantget_script()const🔗

Returns the object'sScript instance, ornull if no script is attached.

Array[Dictionary]get_signal_connection_list(signal:StringName)const🔗

Returns anArray of connections for the givensignal name. Each connection is represented as aDictionary that contains three entries:

• signal is a reference to theSignal;

• callable is a reference to the connectedCallable;

• flags is a combination ofConnectFlags.

Array[Dictionary]get_signal_list()const🔗

Returns the list of existing signals as anArray of dictionaries.

Note: Due of the implementation, eachDictionary is formatted very similarly to the returned values ofget_method_list().

StringNameget_translation_domain()const🔗

Returns the name of the translation domain used bytr() andtr_n(). See alsoTranslationServer.

boolhas_connections(signal:StringName)const🔗

Returnstrue if any connection exists on the givensignal name.

Note: In C#,signal must be in snake_case when referring to built-in Godot methods. Prefer using the names exposed in theSignalName class to avoid allocating a newStringName on each call.

boolhas_meta(name:StringName)const🔗

Returnstrue if a metadata entry is found with the givenname. See alsoget_meta(),set_meta() andremove_meta().

Note: A metadata's name must be a valid identifier as perStringName.is_valid_identifier() method.

Note: Metadata that has a name starting with an underscore (_) is considered editor-only. Editor-only metadata is not displayed in the Inspector and should not be edited, although it can still be found by this method.

boolhas_method(method:StringName)const🔗

Returnstrue if the givenmethod name exists in the object.

Note: In C#,method must be in snake_case when referring to built-in Godot methods. Prefer using the names exposed in theMethodName class to avoid allocating a newStringName on each call.

boolhas_signal(signal:StringName)const🔗

Returnstrue if the givensignal name exists in the object.

Note: In C#,signal must be in snake_case when referring to built-in Godot signals. Prefer using the names exposed in theSignalName class to avoid allocating a newStringName on each call.

boolhas_user_signal(signal:StringName)const🔗

Returnstrue if the given user-definedsignal name exists. Only signals added withadd_user_signal() are included. See alsoremove_user_signal().

boolis_blocking_signals()const🔗

Returnstrue if the object is blocking its signals from being emitted. Seeset_block_signals().

boolis_class(class:String)const🔗

Returnstrue if the object inherits from the givenclass. See alsoget_class().

varsprite2d=Sprite2D.new()sprite2d.is_class("Sprite2D")# Returns truesprite2d.is_class("Node")# Returns truesprite2d.is_class("Node3D")# Returns false

varsprite2D=newSprite2D();sprite2D.IsClass("Sprite2D");// Returns truesprite2D.IsClass("Node");// Returns truesprite2D.IsClass("Node3D");// Returns false

Note: This method ignoresclass_name declarations in the object's script.

boolis_connected(signal:StringName, callable:Callable)const🔗

Returnstrue if a connection exists between the givensignal name andcallable.

Note: In C#,signal must be in snake_case when referring to built-in Godot signals. Prefer using the names exposed in theSignalName class to avoid allocating a newStringName on each call.

boolis_queued_for_deletion()const🔗

Returnstrue if theNode.queue_free() method was called for the object.

voidnotification(what:int, reversed:bool = false)🔗

Sends the givenwhat notification to all classes inherited by the object, triggering calls to_notification(), starting from the highest ancestor (theObject class) and going down to the object's script.

Ifreversed istrue, the call order is reversed.

varplayer=Node2D.new()player.set_script(load("res://player.gd"))player.notification(NOTIFICATION_ENTER_TREE)# The call order is Object -> Node -> Node2D -> player.gd.player.notification(NOTIFICATION_ENTER_TREE,true)# The call order is player.gd -> Node2D -> Node -> Object.

varplayer=newNode2D();player.SetScript(GD.Load("res://player.gd"));player.Notification(NotificationEnterTree);// The call order is GodotObject -> Node -> Node2D -> player.gd.player.Notification(NotificationEnterTree,true);// The call order is player.gd -> Node2D -> Node -> GodotObject.

voidnotify_property_list_changed()🔗

Emits theproperty_list_changed signal. This is mainly used to refresh the editor, so that the Inspector and editor plugins are properly updated.

boolproperty_can_revert(property:StringName)const🔗

Returnstrue if the givenproperty has a custom default value. Useproperty_get_revert() to get theproperty's default value.

Note: This method is used by the Inspector dock to display a revert icon. The object must implement_property_can_revert() to customize the default value. If_property_can_revert() is not implemented, this method returnsfalse.

Variantproperty_get_revert(property:StringName)const🔗

Returns the custom default value of the givenproperty. Useproperty_can_revert() to check if theproperty has a custom default value.

Note: This method is used by the Inspector dock to display a revert icon. The object must implement_property_get_revert() to customize the default value. If_property_get_revert() is not implemented, this method returnsnull.

voidremove_meta(name:StringName)🔗

Removes the given entryname from the object's metadata. See alsohas_meta(),get_meta() andset_meta().

Note: A metadata's name must be a valid identifier as perStringName.is_valid_identifier() method.

Note: Metadata that has a name starting with an underscore (_) is considered editor-only. Editor-only metadata is not displayed in the Inspector and should not be edited, although it can still be found by this method.

voidremove_user_signal(signal:StringName)🔗

Removes the given user signalsignal from the object. See alsoadd_user_signal() andhas_user_signal().

voidset(property:StringName, value:Variant)🔗

Assignsvalue to the givenproperty. If the property does not exist or the givenvalue's type doesn't match, nothing happens.

varnode=Node2D.new()node.set("global_scale",Vector2(8,2.5))print(node.global_scale)# Prints (8.0, 2.5)

varnode=newNode2D();node.Set(Node2D.PropertyName.GlobalScale,newVector2(8,2.5f));GD.Print(node.GlobalScale);// Prints (8, 2.5)

Note: In C#,property must be in snake_case when referring to built-in Godot properties. Prefer using the names exposed in thePropertyName class to avoid allocating a newStringName on each call.

voidset_block_signals(enable:bool)🔗

If set totrue, the object becomes unable to emit signals. As such,emit_signal() and signal connections will not work, until it is set tofalse.

voidset_deferred(property:StringName, value:Variant)🔗

Assignsvalue to the givenproperty, at the end of the current frame. This is equivalent to callingset() throughcall_deferred().

varnode=Node2D.new()add_child(node)node.rotation=1.5node.set_deferred("rotation",3.0)print(node.rotation)# Prints 1.5awaitget_tree().process_frameprint(node.rotation)# Prints 3.0

varnode=newNode2D();node.Rotation=1.5f;node.SetDeferred(Node2D.PropertyName.Rotation,3f);GD.Print(node.Rotation);// Prints 1.5awaitToSignal(GetTree(),SceneTree.SignalName.ProcessFrame);GD.Print(node.Rotation);// Prints 3.0

Note: In C#,property must be in snake_case when referring to built-in Godot properties. Prefer using the names exposed in thePropertyName class to avoid allocating a newStringName on each call.

voidset_indexed(property_path:NodePath, value:Variant)🔗

Assigns a newvalue to the property identified by theproperty_path. The path should be aNodePath relative to this object, and can use the colon character (:) to access nested properties.

varnode=Node2D.new()node.set_indexed("position",Vector2(42,0))node.set_indexed("position:y",-10)print(node.position)# Prints (42.0, -10.0)

varnode=newNode2D();node.SetIndexed("position",newVector2(42,0));node.SetIndexed("position:y",-10);GD.Print(node.Position);// Prints (42, -10)

Note: In C#,property_path must be in snake_case when referring to built-in Godot properties. Prefer using the names exposed in thePropertyName class to avoid allocating a newStringName on each call.

voidset_message_translation(enable:bool)🔗

If set totrue, allows the object to translate messages withtr() andtr_n(). Enabled by default. See alsocan_translate_messages().

voidset_meta(name:StringName, value:Variant)🔗

Adds or changes the entryname inside the object's metadata. The metadatavalue can be anyVariant, although some types cannot be serialized correctly.

Ifvalue isnull, the entry is removed. This is the equivalent of usingremove_meta(). See alsohas_meta() andget_meta().

Note: A metadata's name must be a valid identifier as perStringName.is_valid_identifier() method.

Note: Metadata that has a name starting with an underscore (_) is considered editor-only. Editor-only metadata is not displayed in the Inspector and should not be edited, although it can still be found by this method.

voidset_script(script:Variant)🔗

Attachesscript to the object, and instantiates it. As a result, the script's_init() is called. AScript is used to extend the object's functionality.

If a script already exists, its instance is detached, and its property values and state are lost. Built-in property values are still kept.

voidset_translation_domain(domain:StringName)🔗

Sets the name of the translation domain used bytr() andtr_n(). See alsoTranslationServer.

Stringto_string()🔗

Returns aString representing the object. Defaults to"<ClassName#RID>". Override_to_string() to customize the string representation of the object.

Stringtr(message:StringName, context:StringName = &"")const🔗

Translates amessage, using the translation catalogs configured in the Project Settings. Furthercontext can be specified to help with the translation. Note that mostControl nodes automatically translate their strings, so this method is mostly useful for formatted strings or custom drawn text.

Ifcan_translate_messages() isfalse, or no translation is available, this method returns themessage without changes. Seeset_message_translation().

For detailed examples, seeInternationalizing games.

Note: This method can't be used without anObject instance, as it requires thecan_translate_messages() method. To translate strings in a static context, useTranslationServer.translate().

Stringtr_n(message:StringName, plural_message:StringName, n:int, context:StringName = &"")const🔗

Translates amessage orplural_message, using the translation catalogs configured in the Project Settings. Furthercontext can be specified to help with the translation.

Ifcan_translate_messages() isfalse, or no translation is available, this method returnsmessage orplural_message, without changes. Seeset_message_translation().

Then is the number, or amount, of the message's subject. It is used by the translation system to fetch the correct plural form for the current language.

For detailed examples, seeLocalization using gettext.

Note: Negative andfloat numbers may not properly apply to some countable subjects. It's recommended to handle these cases withtr().

Note: This method can't be used without anObject instance, as it requires thecan_translate_messages() method. To translate strings in a static context, useTranslationServer.translate_plural().