There are two ways to create aRegExp object: aliteral notation and aconstructor.

• Theliteral notation takes a pattern between two slashes, followed by optionalflags, after the second slash.
• Theconstructor function takes either a string or aRegExp object as its first parameter and a string of optionalflags as its second parameter.

The following three expressions create the same regular expression object:

const re = /ab+c/i; // literal notation// ORconst re = new RegExp("ab+c", "i"); // constructor with string pattern as first argument// ORconst re = new RegExp(/ab+c/, "i"); // constructor with regular expression literal as first argument

Before regular expressions can be used, they have to be compiled. This process allows them to perform matches more efficiently. More about the process can be found indotnet docs.

The literal notation results in compilation of the regular expression when the expression is evaluated. On the other hand, the constructor of theRegExp object,new RegExp('ab+c'), results in runtime compilation of the regular expression.

Use a string as the first argument to theRegExp() constructor when you want tobuild the regular expression from dynamic input.

The expressionnew RegExp(/ab+c/, flags) will create a newRegExp using the source of the first parameter and theflags provided by the second.

When using the constructor function, the normal string escape rules (preceding special characters with\ when included in a string) are necessary.

For example, the following are equivalent:

const re = /\w+/;// ORconst re = new RegExp("\\w+");

Some built-in methods would treat regexes specially. They decide whetherx is a regex throughmultiple steps:

1. x must be an object (not a primitive).
2. Ifx[Symbol.match] is notundefined, check if it'struthy.
3. Otherwise, ifx[Symbol.match] isundefined, check ifx had been created with theRegExp constructor. (This step should rarely happen, since ifx is aRegExp object that have not been tampered with, it should have aSymbol.match property.)

Note that in most cases, it would go through theSymbol.match check, which means:

• An actualRegExp object whoseSymbol.match property's value isfalsy but notundefined (even with everything else intact, likeexec and[Symbol.replace]()) can be used as if it's not a regex.
• A non-RegExp object with aSymbol.match property will be treated as if it's a regex.

This choice was made because[Symbol.match]() is the most indicative property that something is intended to be used for matching. (exec could also be used, but because it's not a symbol property, there would be too many false positives.) The places that treat regexes specially include:

• String.prototype.endsWith(),startsWith(), andincludes() throw aTypeError if the first argument is a regex.
• String.prototype.matchAll() andreplaceAll() check whether theglobal flag is set if the first argument is a regex before invoking its[Symbol.matchAll]() or[Symbol.replace]() method.
• TheRegExp() constructor directly returns thepattern argument only ifpattern is a regex (among a few other conditions). Ifpattern is a regex, it would also interrogatepattern'ssource andflags properties instead of coercingpattern to a string.

For example,String.prototype.endsWith() would coerce all inputs to strings, but it would throw if the argument is a regex, because it's only designed to match strings, and using a regex is likely a developer mistake.

"foobar".endsWith({ toString: () => "bar" }); // true"foobar".endsWith(/bar/); // TypeError: First argument to String.prototype.endsWith must not be a regular expression

You can get around the check by setting[Symbol.match] to afalsy value that's notundefined. This would mean that the regex cannot be used forString.prototype.match() (since without[Symbol.match],match() would construct a newRegExp object with the two enclosing slashes added byre.toString()), but it can be used for virtually everything else.

const re = /bar/g;re[Symbol.match] = false;"/bar/g".endsWith(re); // truere.exec("bar"); // [ 'bar', index: 0, input: 'bar', groups: undefined ]"bar & bar".replace(re, "foo"); // 'foo & foo'

Note that several of theRegExp properties have both long and short (Perl-like) names. Both names always refer to the same value. (Perl is the programming language from which JavaScript modeled its regular expressions.) See alsodeprecatedRegExp properties.

RegExp()

Creates a newRegExp object.

RegExp.$1, …,RegExp.$9Deprecated

Static read-only properties that contain parenthesized substring matches.

RegExp.input ($_)Deprecated

A static property that contains the last string against which a regular expression was successfully matched.

RegExp.lastMatch ($&)Deprecated

A static read-only property that contains the last matched substring.

RegExp.lastParen ($+)Deprecated

A static read-only property that contains the last parenthesized substring match.

RegExp.leftContext ($`)Deprecated

A static read-only property that contains the substring preceding the most recent match.

RegExp.rightContext ($')Deprecated

A static read-only property that contains the substring following the most recent match.

RegExp[Symbol.species]

The constructor function that is used to create derived objects.

RegExp.escape()

Escapes any potential regex syntax characters in a string, and returns a new string that can be safely used as aliteral pattern for theRegExp() constructor.

These properties are defined onRegExp.prototype and shared by allRegExp instances.

RegExp.prototype.constructor

The constructor function that created the instance object. ForRegExp instances, the initial value is theRegExp constructor.

RegExp.prototype.dotAll

Whether. matches newlines or not.

RegExp.prototype.flags

A string that contains the flags of theRegExp object.

RegExp.prototype.global

Whether to test the regular expression against all possible matches in a string, or only against the first.

RegExp.prototype.hasIndices

Whether the regular expression result exposes the start and end indices of captured substrings.

RegExp.prototype.ignoreCase

Whether to ignore case while attempting a match in a string.

RegExp.prototype.multiline

Whether or not to search in strings across multiple lines.

RegExp.prototype.source

The text of the pattern.

RegExp.prototype.sticky

Whether or not the search is sticky.

RegExp.prototype.unicode

Whether or not Unicode features are enabled.

RegExp.prototype.unicodeSets

Whether or not thev flag, an upgrade to theu mode, is enabled.

These properties are own properties of eachRegExp instance.

lastIndex

The index at which to start the next match.

RegExp.prototype.compile()Deprecated

(Re-)compiles a regular expression during execution of a script.

RegExp.prototype.exec()

Executes a search for a match in its string parameter.

RegExp.prototype.test()

Tests for a match in its string parameter.

RegExp.prototype.toString()

Returns a string representing the specified object. Overrides theObject.prototype.toString() method.

RegExp.prototype[Symbol.match]()

Performs match to given string and returns match result.

RegExp.prototype[Symbol.matchAll]()

Returns all matches of the regular expression against a string.

RegExp.prototype[Symbol.replace]()

Replaces matches in given string with new substring.

RegExp.prototype[Symbol.search]()

Searches the match in given string and returns the index the pattern found in the string.

RegExp.prototype[Symbol.split]()

Splits given string into an array by separating the string into substrings.

The following script uses theString.prototype.replace() method to match a name in the formatfirst last and output it in the formatlast, first.

In the replacement text, the script uses$1 and$2 to indicate the results of the corresponding matching parentheses in the regular expression pattern.

const re = /(\w+)\s(\w+)/;const str = "Maria Cruz";const newStr = str.replace(re, "$2, $1");console.log(newStr);

This displays"Cruz, Maria".

The default line ending varies depending on the platform (Unix, Windows, etc.). The line splitting provided in this example works on all platforms.

const text = "Some text\nAnd some more\r\nAnd yet\nThis is the end";const lines = text.split(/\r?\n/);console.log(lines); // [ 'Some text', 'And some more', 'And yet', 'This is the end' ]

Note that the order of the patterns in the regular expression matters.

By default, the. character does not match newlines. To make it match newlines, use thes flag (dotAll mode).

const s = "Please yes\nmake my day!";s.match(/yes.*day/);// Returns nulls.match(/yes.*day/s);// Returns ["yes\nmake my day"]

Thesticky flag indicates that the regular expression performs sticky matching in the target string by attempting to match starting atRegExp.prototype.lastIndex.

const str = "#foo#";const regex = /foo/y;regex.lastIndex = 1;regex.test(str); // trueregex.lastIndex = 5;regex.test(str); // false (lastIndex is taken into account with sticky flag)regex.lastIndex; // 0 (reset after match failure)

With the sticky flagy, the next match has to happen at thelastIndex position, while with the global flagg, the match can happen at thelastIndex position or later:

const re = /\d/y;let r;while ((r = re.exec("123 456"))) {  console.log(r, "AND re.lastIndex", re.lastIndex);}// [ '1', index: 0, input: '123 456', groups: undefined ] AND re.lastIndex 1// [ '2', index: 1, input: '123 456', groups: undefined ] AND re.lastIndex 2// [ '3', index: 2, input: '123 456', groups: undefined ] AND re.lastIndex 3//  … and no more match.

With the global flagg, all 6 digits would be matched, not just 3.

\w and\W only matches ASCII based characters; for example,a toz,A toZ,0 to9, and_.

To match characters from other languages such as Cyrillic or Hebrew, use\uHHHH, whereHHHH is the character's Unicode value in hexadecimal.

This example demonstrates how one can separate out Unicode characters from a word.

const text = "Образец text на русском языке";const regex = /[\u0400-\u04ff]+/g;const match = regex.exec(text);console.log(match[0]); // 'Образец'console.log(regex.lastIndex); // 7const match2 = regex.exec(text);console.log(match2[0]); // 'на' (did not log 'text')console.log(regex.lastIndex); // 15// and so on

TheUnicode property escapes feature provides a simpler way to target particular Unicode ranges, by allowing for statements like\p{scx=Cyrl} (to match any Cyrillic letter), or\p{L}/u (to match a letter from any language).

Starting with Firefox 34, in the case of a capturing group with quantifiers preventing its exercise, the matched text for a capturing group is nowundefined instead of an empty string:

// Firefox 33 or older"x".replace(/x(.)?/g, (m, group) => {  console.log(`group: ${JSON.stringify(group)}`);});// group: ""// Firefox 34 or newer"x".replace(/x(.)?/g, (m, group) => {  console.log(`group: ${group}`);});// group: undefined

Note that due to web compatibility,RegExp.$N will still return an empty string instead ofundefined (bug 1053944).

• Polyfill of many modernRegExp features (dotAll,sticky flags, named capture groups, etc.) incore-js
• Regular expressions guide
• Regular expressions
• String.prototype.match()
• String.prototype.replace()
• String.prototype.split()