The 2024-2029 5-year Research Plan is currently under review, with a preliminary summary availablehere.

The DIII-D Research Division is divided into3 groups:Fusion Pilot Plant Research, Plasma-Interacting Technology, and ITER Research.

Fusion Pilot Plant (FPP) Research group

Topical areas:Steady-state and pulsed fusioncore,Plasma control,Divertor science and innovation,Core-edge integration 

The FPP group focuses on identifying attractive options for tokamak pilot plants, supporting the development of both steady-state and pulsed operations. Steady-state operation will rely on achieving full non-inductive sustainment of the plasma current by external current drive and self-driven bootstrap current at high plasma pressure, while pulsed operation can benefit from non-inductive current drive but typically relies on higher plasma current dominated by inductive drive. Additionally, the high heat and particle exhaust coming out of the plasma core must be adequately managed to protect material surfaces from damage and control plasma density and dilution. Thus, in the FPP group, the physics of integrating core scenario design and boundary/divertor development will be given special attention, as a tension exists between design choices that maximize core performance and choices that best manage boundary heat and particle exhaust. Key to all of these efforts is the controls research in the group, while will involve multiple tools (i.e., full and reduced physics model-based tools and data-driven tools including machine learning/artificial intelligence) to tackle multiple problems, from core tearing mode avoidance to real-time divertor detachment. Thus, theresearch goals ofthe group are:

1. Develop integrated operational scenarios for sustaining high fusion power and fusion gain either indefinitely or in pulses, with all scenarios achieving sufficient MHD stability and energy confinement 
2. Design of optimal divertor magnetic and structural geometries that enable high plasma shaping (for high core performance), control of scrape-off-layer magnetic flux expansion, and baffling for controlling neutral trapping, impurity radiation density, particle pumping, and target heat flux through divertor detachment 
3. Develop and deploy advanced plasma controls, both to achieve DIII-D’s FPP physics research objectives and to provide useful controls for FPPs that will have different limitations than present-day devices

ITER Research group

Topical areas:ITER integrated scenarios,Turbulence andtransport,Energeticparticles and Alfvén eigenmodes,Pedestal andnon/small-ELMregimes,Transientcontrol 

TheITER tokamak experiment, currently under construction in southern France through an international research collaboration, seeks to demonstrate the scientific and technical feasibility of fusion energy. A central goal of the ITER project is to achieve afusion gain ratio of Q (output fusion power to inputpower)=10or higher for an extended duration of hundreds of seconds and a “steady state” gain of Q (output fusion power to inputpower)=5 for potentially thousands of seconds. The newly formed ITER Research Group at DIII-D aims to make ITER successful by developing operational scenarios, validating simulations used to predict ITER confinement and pressure, and further optimizing its performance. The research goals of the topical areas are:

1. Develop and test ITER-like plasmas to understand performance and stability limits, radiative properties, core-edge integration
2. Identify the properties and dynamics of transport of fuel particles, impurities, energy, and momentum across magnetic fields and predicting intrinsic rotation
3. Predict the behavior of the fusion-produced energetic alpha particle population, other fast particles, and Alfvénic instability generation 
4. Understand the mechanisms and dynamics of the edge pedestal that forms the boundary between the hot plasma core and the boundary plasma layer
5. Develop and validate approaches to control, reduce and suppress transient instabilities that can potentially damage walls due to high heat and particle bursts

Plasma-Interacting Technology (PIT) group

Topical areas:Plasma-material interactions,Disruption mitigation,Heating and current drive,Diagnostics and actuators

As the U.S. fusion energy program works to resolve the design of a low capital cost FPP, with a goal to start engineering design and possibly construction in the next decade, there is a much greater focus on solving the technological challenges needed to realize an FPP. A key aspect of this development lies in assessing FPP technology in the plasma environment, where plasma interaction can be a key constraint or is a key point of that technology. To meet this challenge, the DIII-D PITgroup is focused on key technology areas where DIII-D can have the biggest impact on the FPP program, such as generating input for trade studies leading to FPP designs. Key goals for the PITgroup include:

1. Assess current and novel diagnostic and actuator techniques for robust plasma control and machine protection in a high neutron fluence environment, and establish capability to validate such techniques 
2. Optimize heating and current driver systems to achieve net electrical power generation, with a focus on experimentally testing and validating models of helicon, lower hybrid, and electron cyclotron technologies
3. Develop and validate methods to suppress and mitigate runaway electrons, as well as passive and alternative mitigation systems, to reduce the risk of unplanned and long-duration maintenance periods
4. Experimentally validate plasma-material interactions for optimizing the design of the FPP first wall and divertor, including dust/debris management, to maximize component lifetime and minimize fuel retention