gcloud compute networks update

NAME
gcloud compute networks update - update a Compute Engine network
SYNOPSIS
gcloud compute networks updateNAME[--async][--[no-]enable-ula-internal-ipv6][--internal-ipv6-range=INTERNAL_IPV6_RANGE][--mtu=MTU][--network-firewall-policy-enforcement-order=NETWORK_FIREWALL_POLICY_ENFORCEMENT_ORDER][--bgp-best-path-selection-mode=BGP_BEST_PATH_SELECTION_MODE--[no-]bgp-bps-always-compare-med--bgp-bps-inter-region-cost=BGP_BPS_INTER_REGION_COST][--bgp-routing-mode=MODE    |--switch-to-custom-subnet-mode][GCLOUD_WIDE_FLAG]
DESCRIPTION
gcloud compute networks update is used to update Compute Enginenetworks.
EXAMPLES
To update regional network with the name 'network-name' to global, run:
gcloudcomputenetworksupdatenetwork-name--bgp-routing-mode=global

To update an auto subnet mode network with the name 'network-name' to customsubnet mode, run:

gcloudcomputenetworksupdatenetwork-name--switch-to-custom-subnet-mode
POSITIONAL ARGUMENTS
NAME
Name of the network to operate on.
FLAGS
--async
Return immediately, without waiting for the operation in progress to complete.
--[no-]enable-ula-internal-ipv6
Enable/disable ULA internal IPv6 on this network. Enabling this feature willassign a /48 from google defined ULA prefix fd20::/20.

Use--enable-ula-internal-ipv6 to enable and--no-enable-ula-internal-ipv6 to disable.

--internal-ipv6-range=INTERNAL_IPV6_RANGE
When enabling ULA internal IPv6, caller can optionally specify the /48 rangethey want from the google defined ULA prefix fd20::/20. ULA_IPV6_RANGE must be avalid /48 ULA IPv6 address and within the fd20::/20. Operation will fail if thespeficied /48 is already in used by another resource. If the field is notspeficied, then a /48 range will be randomly allocated from fd20::/20 andreturned via this field.
--mtu=MTU
Maximum transmission unit (MTU) is the size of the largest IP packet that can betransmitted on this network. Default value is 1460 bytes. The minimum value is1300 bytes and the maximum value is 8896 bytes. The MTU advertised via DHCP toall instances attached to this network.
--network-firewall-policy-enforcement-order=NETWORK_FIREWALL_POLICY_ENFORCEMENT_ORDER
The Network Firewall Policy enforcement order of this network. If not specified,defaults to AFTER_CLASSIC_FIREWALL.

NETWORK_FIREWALL_POLICY_ENFORCEMENT_ORDER must be oneof:

AFTER_CLASSIC_FIREWALL
Network Firewall Policy is enforced after classic firewall.
BEFORE_CLASSIC_FIREWALL
Network Firewall Policy is enforced before classic firewall.
BGP Best Path Selection flags
--bgp-best-path-selection-mode=BGP_BEST_PATH_SELECTION_MODE
The BGP best path selection algorithm to be employed.BGP_BEST_PATH_SELECTION_MODE must be one of:
LEGACY
Dynamic routes are ranked based on the multiple exit-discriminator (MED) BGPattribute. When global routing is enabled, the MED of the routes received fromother regions is the original MED plus the region-to-region cost.
STANDARD
Dynamic routes are ranked based on AS Path, Origin, Neighbor ASN and MED BGPattributes. When global routing is enabled, region-to-region cost is used as atiebreaker. This mode offers customizations to fine-tune BGP best path routingwith additional flags like --bgp-bps-always-compare-med and--bgp-bps-inter-region-cost
--[no-]bgp-bps-always-compare-med
Enables/disables the comparison of MED across routes with different NeighborASNs. This value can only be set if the --bgp-best-path-selection-mode isSTANDARD. Use--bgp-bps-always-compare-med to enable and--no-bgp-bps-always-compare-med to disable.
--bgp-bps-inter-region-cost=BGP_BPS_INTER_REGION_COST
Defines the preferred approach for handling inter-region cost in the selectionprocess. This value can only be set if the --bgp-best-path-selection-mode isSTANDARD.BGP_BPS_INTER_REGION_COST must be one of:
ADD_COST_TO_MED
Adds inter-region cost to the MED before comparing the MED value. When multipleroutes have the same value after the Add-cost-to-med comparison, the routeselection continues and prefers the route with lowest cost.
DEFAULT
MED is compared as originally received from peers. When multiple routes have thesame MED, cost is evaluated as the next step.
At most one of these can be specified:
--bgp-routing-mode=MODE
The target BGP routing mode for this network.MODE mustbe one of:
global
Cloud Routers in this network advertise subnetworks from all regions to theirBGP peers, and program instances in all regions with the router's best learnedBGP routes.
regional
Cloud Routers in this network advertise subnetworks from their local region onlyto their BGP peers, and program instances in their local region only with therouter's best learned BGP routes.
--switch-to-custom-subnet-mode
Switch to custom subnet mode. This action cannot be undone.
GCLOUD WIDE FLAGS
These flags are available to all commands:--access-token-file,--account,--billing-project,--configuration,--flags-file,--flatten,--format,--help,--impersonate-service-account,--log-http,--project,--quiet,--trace-token,--user-output-enabled,--verbosity.

Run$gcloud help for details.

NOTES
These variants are also available:
gcloudalphacomputenetworksupdate
gcloudbetacomputenetworksupdate

Except as otherwise noted, the content of this page is licensed under theCreative Commons Attribution 4.0 License, and code samples are licensed under theApache 2.0 License. For details, see theGoogle Developers Site Policies. Java is a registered trademark of Oracle and/or its affiliates.

Last updated 2026-01-21 UTC.