gcloud beta compute interconnects wire-groups update - update a Compute Engine wire group

gcloud beta compute interconnects wire-groups updateNAME--cross-site-network=CROSS_SITE_NETWORK[--admin-enabled][--bandwidth-allocation=BANDWIDTH_ALLOCATION][--bandwidth-unmetered=BANDWIDTH_UNMETERED][--description=DESCRIPTION][--fault-response=FAULT_RESPONSE][--type=TYPE][--validate-only][GCLOUD_WIDE_FLAG …]

For an example, refer to theEXAMPLES section below.

gcloudbetacomputeinterconnectswire-groupsupdateexample-wg--cross-site-network=example-csn--no-admin-enabled

To change a wire group's unmetered bandwidth, run:

gcloudbetacomputeinterconnectswire-groupsupdateexample-wg--cross-site-network=example-csn--bandwidth-unmetered=5

To enable automatic failure detection for a wire group, run:

gcloudbetacomputeinterconnectswire-groupsupdateexample-wg--cross-site-network=example-csn--fault-response=DISABLE_PORT

To enable bandwidth sharing for a wire group, run:

gcloudbetacomputeinterconnectswire-groupsupdateexample-wg--cross-site-network=example-csn--bandwidth-allocation=SHARED_WITH_WIRE_GROUP

To update a wire group's description, run:

gcloudbetacomputeinterconnectswire-groupsupdateexample-wg--cross-site-network=example-csn--description="new description"

NAME

Name of the wire group to update.

--cross-site-network=CROSS_SITE_NETWORK

Name of the crossSiteNetwork to operate on.

--admin-enabled

Administrative status of the wire group. When this is enabled, the wire group isoperational and will carry traffic. Use --no-admin-enabled to disable it.

--bandwidth-allocation=BANDWIDTH_ALLOCATION

The bandwidth allocation for the wire group.BANDWIDTH_ALLOCATION must be one of:

ALLOCATE_PER_WIRE

Configures a separate unmetered bandwidth allocation (and associated charges)for each wire in the group.

SHARED_WITH_WIRE_GROUP

Configures one unmetered bandwidth allocation for the wire group. The unmeteredbandwidth is divided equally across each wire in the group, but dynamicthrottling reallocates unused unmetered bandwidth from unused or underused wiresto other wires in the group.

--bandwidth-unmetered=BANDWIDTH_UNMETERED

The amount of unmetered bandwidth to assign to the wire group.

--description=DESCRIPTION

An optional, textual description for the wire group.

--fault-response=FAULT_RESPONSE

The fault response for the wire group.FAULT_RESPONSEmust be one of:

DISABLE_PORT

Disable port

NONE

None

--type=TYPE

The type for the wire group.TYPE must be one of:

BOX_AND_CROSS

Box and cross type wire groups must have two VLAN tags. The first is for thesame-zone pseudowire, and the second is for the cross-zone pseudowire.

REDUNDANT

Redundant type wire groups must have only one VLAN tag.

WIRE

Single wire type wire groups must have only one VLAN tag.

--validate-only

Validate the new configuration, but don't update it.

Run$gcloud help for details.