object

Effective firewalls on the network.

string

[Output Only] Type of the resource. Alwayscompute#firewall for firewall rules.

string (uint64 format)

[Output Only] The unique identifier for the resource. This identifier is defined by the server.

string

[Output Only] Creation timestamp inRFC3339 text format.

string

Name of the resource; provided by the client when the resource is created. The name must be 1-63 characters long, and comply withRFC1035. Specifically, the name must be 1-63 characters long and match the regular expression[a-z]([-a-z0-9]*[a-z0-9])?. The first character must be a lowercase letter, and all following characters (except for the last character) must be a dash, lowercase letter, or digit. The last character must be a lowercase letter or digit.

string

An optional description of this resource. Provide this field when you create the resource.

string

URL of the network resource for this firewall rule. If not specified when creating a firewall rule, thedefault network is used:

global/networks/default

• https://www.googleapis.com/compute/v1/projects/myproject/global/networks/my-network
• projects/myproject/global/networks/my-network
• global/networks/default

integer

Priority for this rule. This is an integer between0 and65535, both inclusive. The default value is1000. Relative priorities determine which rule takes effect if multiple rules apply. Lower values indicate higher priority. For example, a rule with priority0 has higher precedence than a rule with priority1. DENY rules take precedence over ALLOW rules if they have equal priority. Note that VPC networks haveimplied rules with a priority of65535. To avoid conflicts with the implied rules, use a priority number less than65535.

string

If source ranges are specified, the firewall rule applies only to traffic that has a source IP address in these ranges. These ranges must be expressed inCIDR format. One or both ofsourceRanges andsourceTags may be set. If both fields are set, the rule applies to traffic that has a source IP address withinsourceRanges OR a source IP from a resource with a matching tag listed in thesourceTags field. The connection does not need to match both fields for the rule to apply. Both IPv4 and IPv6 are supported.

string

If destination ranges are specified, the firewall rule applies only to traffic that has destination IP address in these ranges. These ranges must be expressed inCIDR format. Both IPv4 and IPv6 are supported.

string

If source tags are specified, the firewall rule applies only to traffic with source IPs that match the primary network interfaces of VM instances that have the tag and are in the same VPC network. Source tags cannot be used to control traffic to an instance's external IP address, it only applies to traffic between instances in the same virtual network. Because tags are associated with instances, not IP addresses. One or both ofsourceRanges andsourceTags may be set. If both fields are set, the firewall applies to traffic that has a source IP address withinsourceRanges OR a source IP from a resource with a matching tag listed in thesourceTags field. The connection does not need to match both fields for the firewall to apply.

string

A list of tags that controls which instances the firewall rule applies to. IftargetTags are specified, then the firewall rule applies only to instances in the VPC network that have one of those tags. If notargetTags are specified, the firewall rule applies to all instances on the specified network.

string

If source service accounts are specified, the firewall rules apply only to traffic originating from an instance with a service account in this list. Source service accounts cannot be used to control traffic to an instance's external IP address because service accounts are associated with an instance, not an IP address.sourceRanges can be set at the same time assourceServiceAccounts. If both are set, the firewall applies to traffic that has a source IP address within thesourceRanges OR a source IP that belongs to an instance with service account listed insourceServiceAccount. The connection does not need to match both fields for the firewall to apply.sourceServiceAccounts cannot be used at the same time assourceTags ortargetTags.

string

A list of service accounts indicating sets of instances located in the network that may make network connections as specified inallowed[].targetServiceAccounts cannot be used at the same time astargetTags orsourceTags. If neithertargetServiceAccounts nortargetTags are specified, the firewall rule applies to all instances on the specified network.

object

The list of ALLOW rules specified by this firewall. Each rule specifies a protocol and port-range tuple that describes a permitted connection.

string

The IP protocol to which this rule applies. The protocol type is required when creating a firewall rule. This value can either be one of the following well known protocol strings (tcp,udp,icmp,esp,ah,ipip,sctp) or the IP protocol number.

string

An optional list of ports to which this rule applies. This field is only applicable for the UDP or TCP protocol. Each entry must be either an integer or a range. If not specified, this rule applies to connections through any port.

Example inputs include:["22"],["80","443"], and["12345-12349"].

object

The list of DENY rules specified by this firewall. Each rule specifies a protocol and port-range tuple that describes a denied connection.

string

The IP protocol to which this rule applies. The protocol type is required when creating a firewall rule. This value can either be one of the following well known protocol strings (tcp,udp,icmp,esp,ah,ipip,sctp) or the IP protocol number.

string

An optional list of ports to which this rule applies. This field is only applicable for the UDP or TCP protocol. Each entry must be either an integer or a range. If not specified, this rule applies to connections through any port.

Example inputs include:["22"],["80","443"], and["12345-12349"].

enum

Direction of traffic to which this firewall applies, eitherINGRESS orEGRESS. The default isINGRESS. ForEGRESS traffic, you cannot specify thesourceTags fields.

object

This field denotes the logging options for a particular firewall rule. If logging is enabled, logs will be exported to Cloud Logging.

boolean

This field denotes whether to enable logging for a particular firewall rule.

enum

This field can only be specified for a particular firewall rule if logging is enabled for that rule. This field denotes whether to include or exclude metadata for firewall logs.

boolean

Denotes whether the firewall rule is disabled. When set to true, the firewall rule is not enforced and the network behaves as if it did not exist. If this is unspecified, the firewall rule will be enabled.

string

[Output Only] Server-defined URL for the resource.

object

Input only. [Input Only] Additional params passed with the request, but not persisted as part of resource payload.

map (key: string, value: string)

Tag keys/values directly bound to this resource. Tag keys and values have the same definition asresource manager tags. The field is allowed for INSERT only. The keys/values to set on the resource should be specified in either ID { :} or Namespaced format { :}. For example the following are valid inputs: * {"tagKeys/333" : "tagValues/444", "tagKeys/123" : "tagValues/456"} * {"123/environment" : "production", "345/abc" : "xyz"} Note: * Invalid combinations of ID & namespaced format is not supported. For instance: {"123/environment" : "tagValues/444"} is invalid.

object

[Output Only] Effective firewalls from firewall policy. It returns Global Network Firewall Policies and Hierarchical Firewall Policies. UseregionNetworkFirewallPolicies.getEffectiveFirewalls to get Regional Network Firewall Policies as well.

string

[Output Only] The name of the firewall policy.

enum

[Output Only] The type of the firewall policy.

string

[Output Only] The short name of the firewall policy.

string

[Output Only] Deprecated, please use short name instead. The display name of the firewall policy.

object

[Output Only] The rules that apply to the network.

string

[Output only] Type of the resource. Returnscompute#firewallPolicyRule for firewall rules andcompute#packetMirroringRule for packet mirroring rules.

string

An optional name for the rule. This field is not a unique identifier and can be updated.

string

An optional description for this resource.

integer

An integer indicating the priority of a rule in the list. The priority must be a positive value between 0 and 2147483647. Rules are evaluated from highest to lowest priority where 0 is the highest priority and 2147483647 is the lowest priority.

object

A match condition that incoming traffic is evaluated against. If it evaluates to true, the corresponding 'action' is enforced.

string

CIDR IP address range. Maximum number of source CIDR IP ranges allowed is 5000.

string

CIDR IP address range. Maximum number of destination CIDR IP ranges allowed is 5000.

object

Pairs of IP protocols and ports that the rule should match.

string

The IP protocol to which this rule applies. The protocol type is required when creating a firewall rule. This value can either be one of the following well known protocol strings (tcp,udp,icmp,esp,ah,ipip,sctp), or the IP protocol number.

string

An optional list of ports to which this rule applies. This field is only applicable for UDP or TCP protocol. Each entry must be either an integer or a range. If not specified, this rule applies to connections through any port.

Example inputs include:["22"],["80","443"], and["12345-12349"].

object

networks.list of secure tag values, which should be matched at the source of the traffic. For INGRESS rule, if all thesrcSecureTag are INEFFECTIVE, and there is nosrcIpRange, this rule will be ignored. Maximum number of source tag values allowed is 256.

string

Name of the secure tag, created with TagManager's TagValue API.

enum

[Output Only] State of the secure tag, eitherEFFECTIVE orINEFFECTIVE. A secure tag isINEFFECTIVE when it is deleted or its network is deleted.

string

Address groups which should be matched against the traffic destination. Maximum number of destination address groups is 10.

string

Address groups which should be matched against the traffic source. Maximum number of source address groups is 10.

string

Fully Qualified Domain Name (FQDN) which should be matched against traffic source. Maximum number of source fqdn allowed is 100.

string

Fully Qualified Domain Name (FQDN) which should be matched against traffic destination. Maximum number of destination fqdn allowed is 100.

string

Region codes whose IP addresses will be used to match for source of traffic. Should be specified as 2 letter country code defined as per ISO 3166 alpha-2 country codes. ex."US" Maximum number of source region codes allowed is 5000.

string

Region codes whose IP addresses will be used to match for destination of traffic. Should be specified as 2 letter country code defined as per ISO 3166 alpha-2 country codes. ex."US" Maximum number of dest region codes allowed is 5000.

string

Names of Network Threat Intelligence lists. The IPs in these lists will be matched against traffic destination.

string

Names of Network Threat Intelligence lists. The IPs in these lists will be matched against traffic source.

enum

Network type of the traffic source. Allowed values are:

• UNSPECIFIED
• INTERNET
• INTRA_VPC
• NON_INTERNET
• VPC_NETWORKS

string

Networks of the traffic source. It can be either a full or partial url.

enum

Network type of the traffic destination. Allowed values are:

• UNSPECIFIED
• INTERNET
• NON_INTERNET

string

The Action to perform when the client connection triggers the rule. Valid actions for firewall rules are: "allow", "deny", "apply_security_profile_group" and "goto_next". Valid actions for packet mirroring rules are: "mirror", "do_not_mirror" and "goto_next".

string

A fully-qualified URL of a SecurityProfile resource instance. Example:https://networksecurity.googleapis.com/v1/projects/{project}/locations/{location}/securityProfileGroups/my-security-profile-group Must be specified if action is one of 'apply_security_profile_group' or 'mirror'. Cannot be specified for other actions.

boolean

Boolean flag indicating if the traffic should be TLS decrypted. Can be set only if action = 'apply_security_profile_group' and cannot be set for other actions.

enum

The direction in which this rule applies.

string

A list of network resource URLs to which this rule applies. This field allows you to control which network's VMs get this rule. If this field is left blank, all VMs within the organization will receive the rule.

boolean

Denotes whether to enable logging for a particular rule. If logging is enabled, logs will be exported to the configured export destination in Stackdriver. Logs may be exported to BigQuery or Pub/Sub. Note: you cannot enable logging on "goto_next" rules.

integer

[Output Only] Calculation of the complexity of a single firewall policy rule.

string

A list of service accounts indicating the sets of instances that are applied with this rule.

object

A list of secure tags that controls which instances the firewall rule applies to. IftargetSecureTag are specified, then the firewall rule applies only to instances in the VPC network that have one of those EFFECTIVE secure tags, if all the targetSecureTag are in INEFFECTIVE state, then this rule will be ignored.targetSecureTag may not be set at the same time astargetServiceAccounts. If neithertargetServiceAccounts nortargetSecureTag are specified, the firewall rule applies to all instances on the specified network. Maximum number of target label tags allowed is 256.

string

Name of the secure tag, created with TagManager's TagValue API.

enum

[Output Only] State of the secure tag, eitherEFFECTIVE orINEFFECTIVE. A secure tag isINEFFECTIVE when it is deleted or its network is deleted.

boolean

Denotes whether the firewall policy rule is disabled. When set to true, the firewall policy rule is not enforced and traffic behaves as if it did not exist. If this is unspecified, the firewall policy rule will be enabled.

object

[Output Only] The packet mirroring rules that apply to the network.

string

[Output only] Type of the resource. Returnscompute#firewallPolicyRule for firewall rules andcompute#packetMirroringRule for packet mirroring rules.

string

An optional name for the rule. This field is not a unique identifier and can be updated.

string

An optional description for this resource.

integer

An integer indicating the priority of a rule in the list. The priority must be a positive value between 0 and 2147483647. Rules are evaluated from highest to lowest priority where 0 is the highest priority and 2147483647 is the lowest priority.

object

A match condition that incoming traffic is evaluated against. If it evaluates to true, the corresponding 'action' is enforced.

string

CIDR IP address range. Maximum number of source CIDR IP ranges allowed is 5000.

string

CIDR IP address range. Maximum number of destination CIDR IP ranges allowed is 5000.

object

Pairs of IP protocols and ports that the rule should match.

string

The IP protocol to which this rule applies. The protocol type is required when creating a firewall rule. This value can either be one of the following well known protocol strings (tcp,udp,icmp,esp,ah,ipip,sctp), or the IP protocol number.

string

An optional list of ports to which this rule applies. This field is only applicable for UDP or TCP protocol. Each entry must be either an integer or a range. If not specified, this rule applies to connections through any port.

Example inputs include:["22"],["80","443"], and["12345-12349"].

object

networks.list of secure tag values, which should be matched at the source of the traffic. For INGRESS rule, if all thesrcSecureTag are INEFFECTIVE, and there is nosrcIpRange, this rule will be ignored. Maximum number of source tag values allowed is 256.

string

Name of the secure tag, created with TagManager's TagValue API.

enum

[Output Only] State of the secure tag, eitherEFFECTIVE orINEFFECTIVE. A secure tag isINEFFECTIVE when it is deleted or its network is deleted.

string

Address groups which should be matched against the traffic destination. Maximum number of destination address groups is 10.

string

Address groups which should be matched against the traffic source. Maximum number of source address groups is 10.

string

Fully Qualified Domain Name (FQDN) which should be matched against traffic source. Maximum number of source fqdn allowed is 100.

string

Fully Qualified Domain Name (FQDN) which should be matched against traffic destination. Maximum number of destination fqdn allowed is 100.

string

Region codes whose IP addresses will be used to match for source of traffic. Should be specified as 2 letter country code defined as per ISO 3166 alpha-2 country codes. ex."US" Maximum number of source region codes allowed is 5000.

string

Region codes whose IP addresses will be used to match for destination of traffic. Should be specified as 2 letter country code defined as per ISO 3166 alpha-2 country codes. ex."US" Maximum number of dest region codes allowed is 5000.

string

Names of Network Threat Intelligence lists. The IPs in these lists will be matched against traffic destination.

string

Names of Network Threat Intelligence lists. The IPs in these lists will be matched against traffic source.

enum

Network type of the traffic source. Allowed values are:

• UNSPECIFIED
• INTERNET
• INTRA_VPC
• NON_INTERNET
• VPC_NETWORKS

string

Networks of the traffic source. It can be either a full or partial url.

enum

Network type of the traffic destination. Allowed values are:

• UNSPECIFIED
• INTERNET
• NON_INTERNET

string

The Action to perform when the client connection triggers the rule. Valid actions for firewall rules are: "allow", "deny", "apply_security_profile_group" and "goto_next". Valid actions for packet mirroring rules are: "mirror", "do_not_mirror" and "goto_next".

string

A fully-qualified URL of a SecurityProfile resource instance. Example:https://networksecurity.googleapis.com/v1/projects/{project}/locations/{location}/securityProfileGroups/my-security-profile-group Must be specified if action is one of 'apply_security_profile_group' or 'mirror'. Cannot be specified for other actions.

boolean

Boolean flag indicating if the traffic should be TLS decrypted. Can be set only if action = 'apply_security_profile_group' and cannot be set for other actions.

enum

The direction in which this rule applies.

string

A list of network resource URLs to which this rule applies. This field allows you to control which network's VMs get this rule. If this field is left blank, all VMs within the organization will receive the rule.

boolean

Denotes whether to enable logging for a particular rule. If logging is enabled, logs will be exported to the configured export destination in Stackdriver. Logs may be exported to BigQuery or Pub/Sub. Note: you cannot enable logging on "goto_next" rules.

integer

[Output Only] Calculation of the complexity of a single firewall policy rule.

string

A list of service accounts indicating the sets of instances that are applied with this rule.

object

A list of secure tags that controls which instances the firewall rule applies to. IftargetSecureTag are specified, then the firewall rule applies only to instances in the VPC network that have one of those EFFECTIVE secure tags, if all the targetSecureTag are in INEFFECTIVE state, then this rule will be ignored.targetSecureTag may not be set at the same time astargetServiceAccounts. If neithertargetServiceAccounts nortargetSecureTag are specified, the firewall rule applies to all instances on the specified network. Maximum number of target label tags allowed is 256.

string

Name of the secure tag, created with TagManager's TagValue API.

enum

[Output Only] State of the secure tag, eitherEFFECTIVE orINEFFECTIVE. A secure tag isINEFFECTIVE when it is deleted or its network is deleted.

boolean

Denotes whether the firewall policy rule is disabled. When set to true, the firewall policy rule is not enforced and traffic behaves as if it did not exist. If this is unspecified, the firewall policy rule will be enabled.

integer

[Output only] Priority of firewall policy association. Not applicable for type=HIERARCHY.