Movatterモバイル変換

Inthis episode, we take on the challenge of installing Slackware AArch64 on an Apple MacBook Pro M2 using UTM's native virtualization. We start by booting into the Slackware Installer, make some modifications to correctly configure GRUB, and go through the full installation process. Once the OS is up and running, we take it for a spin—including a successful launch of KDE!

Stuart (MoZes@slackware)

The Operating System Initial Ram Disk (OS InitRD) and the Slackware Installer include a set of kernel module loader scripts that conditionally load the essential modules required to initialise the base hardware during boot. Many ARM devices share common IP Cores, which means that loading the full set of modules unconditionally may improve the chances of bringing up the core subsystems on a new hardware model more easily, rather than having to manually discover them.

Inthis episode, we add functionality to the Kernel module loader to accomplish this.

Stuart (MoZes@slackware)

Hello!Theinstallation guide for the HoneyComb LX2 is now complete, so I can officially confirm its support on Slackware AArch64!Huge thanks to Brent for his research and development efforts.While this machine may be out of most people's price range, if you're looking for a powerful ARM64 system, this one is an absolute beast and makes me happy ;-)

Stuart (MoZes@slackware)

Back when we first ported Slackware to AArch64, we had to use an uncompressed Linux kernel, whereas on ARM32, we had been using gzip-compressed kernels for years. I've been meaning to revisit this for some time.In this episode, we explore compressing the Linux kernel with gzip to reduce its storage footprint.

Stuart (MoZes@slackware)

Thank you for all your support to keep this project going, and happy holidays.

Stuart (MoZes@slackware)

We've upgraded to Linux 6.12! The Raspberry PiKernel fork packages have also been updated.For more information about the update, please seethe post to the community forum.If you appreciate what we're doing with Slackware Linux on ARM, please considermaking a donation to support us. Your contribution helps maintain essentialhardware, cover electricity costs, and keep this longstanding open-sourceproject thriving.You'll find the ways you can helphere

Thanks, Stuart (MoZes@slackware)

We've upgraded to Linux 6.11!Join us for a behind-the-scenes look at the development and testing process that brought this upgrade to life.

Thanks, Stuart (MoZes@slackware)

Open Source projects require comprehensive documentation to be useful and accessible. Join us whilst we hack on theHoneyComb LX2 Slackware Installation Guide.

Thanks, Stuart (MoZes@slackware)

We've upgraded to Linux 6.9! For the first time in 13 years (since the releaseof Slackware 13.37), Slackware ARM is using an unmodified upstream kernel!The Raspberry PiKernel fork packages have also been updated.

The Slackware Installers have also been refreshed and theInstall guides updatedwhere appropriate.

Thanks, Stuart (MoZes@slackware)

Episode S03E39David Cantrell worked in the Slackware core team between 1999-2001, created the Slackware logo, co-developed the web site, the Slackware Linux Essentials book, ported Slackware to the SPARC architecture, developed the first Slackware automatic update tool and introduced a number of other core packages into the distribution.

In this discussion, David delves into his journey of discovering Linux and his experience working for Slackware. He offers valuable insights into the early days of the Linux ecosystem, a time when the platform was gradually gaining recognition and acceptance in the tech community. Through his perspective, we gain a deeper understanding of the challenges and opportunities that characterised this formative period in Linux's history.

Episode S03E38

In this episode we install Slackware onto a Raspberry Pi4 using a vintage DEC VT320.

The Slackware Installer images have been refreshed with the latest package set, and theInstall Guides updated. Enjoy!

Episode S03E36

PINE64's gracious support led to the replacement of the main board in the Pinebook Pro utilised by the Slackware project. In this episode, we showcase the board replacement process and conduct a fresh installation of Slackware.

Slackware ARM celebrates its 22nd birthday on 20th January.

This milestone not only underlines the enduring legacy of Slackware ARM but also signifies its commitment to staying current and providing users with enhanced features and improvements. Cheers to two decades of excellence, and here's to another chapter of innovation and reliability in the Slackware ARM journey!

Join us for a high level Honey Comb LX2 tour, hardware assembly & Slackware Installation.

A Boot Loader update is available in the latest batch of Slackware AArch64-current (Wed Jan 03 08:08:09 UTC 2024).This update tackles the issue of the MMC (SD card) interface becoming inaccessible post a soft reboot, a problem identified during my extensive testing of Linux 6.6.Upon updating to this version of U-Boot, I've been unable to replicate the issue.Consequently, I strongly recommend this as a mandatory update to ready your system for Linux 6.6.The upgrade instructions for both Hardware Models can be

Linux 6.6 is currently undergoing testing here, and once it's demonstrated stability, I intend to roll it out within approximately a week.

Due to the lack of reliable software control, weslice the RockPro64's CPU fan into the 12v power line. We also demonstrate how to wire at 3.3v & 5v.

If anyone is interested in experimenting with lm sensors and can establish reliable software control for the fan, please drop me a mail or post on theLQ forum.

In thelatest vlog episode, I'm installing Slackware AArch64 onto a RockPro64, whichwill become my home gateway upon the release of Slackware 15.1.

The Slackware Installer images have been refreshed with the latest package set, and theInstall Guides updated. Enjoy!

Note: This will be the final installer image based on Linux Kernel 6.1.

Join us as we finalise the technical validation of the HoneyComb LX2 firmware flashing tool within the Slackware Installer.We've fixed the bug found in the post installation phase already.

Next stage is for me to buy one and install it for myself!

In thelatest vlog episode,we discuss the project goals and remove some technical debt around the U-Boot Boot Loader configuration.

We'reon the home stretch!Join us as we finalise the firmware flashing tool for the HoneyComb LX2 Hardware Model support.

Inthis episode, we continue development on the HoneyComb LX2 Hardware Model support.

Join us in this troubleshooting Vlog, where we look ata hardware fault that has appeared on our Pinebook Pro development machine.

Brent demonstrates where we are with the work-in-progresssupport for the HoneyComb LX2 Hardware Model.

Watch as we reduce the generic OS InitRD footprint by 55MB, using the Pre-Boot Shell as a testing tool.This will increase the boot up speed and reduce the time taken to upgrade the Kernel package within the OS.

The Slackware Installer images have been refreshed with the latest package set, and theInstall Guides updated. Enjoy!

Inthis episode of the Slackware ARM Vlog, we look at the new tool to upgrade the Boot Loader.

Today marks Slackware's 30th birthday. Readthe message from the project creator, Patrick Volkerding.

To improve stability of the Raspberry Pi support, we'vereleased packages of the RPi Kernel fork.

Join us as webegin merging in Brent's R&D Hardware Model support for HoneyComb LX2.

Inthis episode, one of the ARM machines has suffered bouts of instability with the storage, so we're cloning the OS and data to another drive and restoring the machine to service.

To bridge the gap of bug fixes and feature disparity between the Raspberry Pi Kernel fork and the offical Linux Kernel,we'vebuilt Slackware Kernel packages from the RPi Kernel fork. They'll be available soon. Stay tuned.

We've published afirmware upgrade guidefor the Raspberry Pi on Slackware AArch64.

Join us as we commemoratethe EOL (End of Life) of Slackware ARM 14.2, and have a look at some of the other ARM hardware used in earlier releases of the ARM port.If you haven't already, check out the 64bit version of Slackware ARM (Slackware AArch64).

After almost seven years, it's time tosay goodbye to Slackware 14.2 on the ARM platform.Originally the plan was to keep it running until the build hardware died, but its Kernel is already long out of support,Slackware 15 has been out for a while, and it costs money to run the build machine.

This does not apply to Slackware x86/64.

It's finally time to call for donations to cover project running costs.As the price of electricity has soared all across Europe, running this projectobviously costs me significantly more money than it ever has. I've already shutdown all but one of the x86's that were part of the compile cluster, as thosewere the largest consumers but that's about all I can do. I've been tempted toshut down the stable release builder for Slackware ARM 14.2 but I don't thinkit consumes much power (and I don't want to lose the 242 days uptime to startmeasuring it ;-) ), and powering it down would effectively mark the EOL(End of Life) for that release, which I don't fancy doing just yet.If you're able to help contribute to the running costs, that'd be certainlyappreciated!

There are two donation options available:Paypal andPatreon

Thanks! Stuart <mozes@slackware>

Slackware ARM podcast : Inseason 3 episode 7 we show you how to add extra software to Slackware by building it from source using theslackbuilds.org repo.

Enjoy! Stuart <mozes@slackware>

Hello
Slackware AArch64/ARM64 has beenreleased into the wild,initially supporting theRockPro64, Pinebook Pro and Raspberry Pi 4 (and RPi3 as I've been reliably informed!). Further support can be enabled by the community by reading the Direct integration documentation that I will finish in the next few weeks.Some areas of hardware support - particularly on the RPi4 - aren't as mature as I'd like, but this is contingent upon upstream support, and I expect the wrinkles will be ironed out at some point.However, everything's been working well here so I'm pleased to be able to finally put it out there.

Thanks tothe supporters for being able to make this happen.

Questions, feedback - head over to theSlackware ARM forum

Enjoy! Stuart <mozes@slackware>

Slackware ARM 15.0 is the 3rd official port of Slackware to the ARM architecture,which I began in July 2016. The baseline architecture target is ARMv7-a, boostingperformance by offloading floating point operations into the hardware.For this reason you should read theupgrade notes to ensure that your Hardware Modelis compatible with this new architecture.

Slackware ARM 32bit has received the benefit of a huge amount of work over thelast year on the AArch64/ARM64 port: I've rewritten theKernel module loader,added a debug shell into it to help onboard new Hardware Models,there's a new tool to manage theOS InitRD to manage and maintain customisationsseamlessly across Kernel package upgrades; improvements within the Installer,lots of bug fixes and improvements throughout the entire OS.

This project is made possible entirely through your support. Last year sawa vast amount of my 10-15 year old infrastructure hardware - an admixture of donatedand recycled disks, servers, network equipment etc. die in quick succession;and with your support I was able to replace the components and add a couple of UPSsto get the project up and running again.So if you like what we're doing here,visit the sponsorship page.As always, the continued development of the ARM port of Slackware is dependentupon Patrick Volkerding's Slackware, so please donate to that first as that'shis income source.You'll find the details for that at the URL above.

Thanks also to the core Slackware crew and the Slackware community forall of the improvements, suggestions, bug fixes which make their way intothe ARM port!

The release alsowraps up Season 2 of the Slackware ARM podcast.

Enjoy! Stuart <mozes@slackware>

In thelatest episode wecontinue hacking on the Slackware Installer support for the Raspberry Pi4, and talk aboutthe rationale behind why we've migrated to filesystem labeling by default.

In the latest SlackChat podcast we finish off the support for the Raspberry Pi4.

Hello!

Release candidate 2 of Slackware 15.0 for ARM 32bit is available for users of -current.Please report any issues to theSlackware ARM forum

MoZes@slackware (Stuart Winter)

Hello!

I aim to complete the installation documentation for Slackware on the Pinebook Pro and RockPro64Hardware Models in the coming weeks.If you'd like to help test prior to public release, drop mozes@slackware - dot -com an email.I'll have a look at the Raspberry Pi4 support in the coming months. Basic support is mostlycomplete, but needs tweaks before it can be Directly Integrated into Slackware.

MoZes@slackware (Stuart Winter)

Hello!An update on Slackware AArch64. The OS was functionally complete in May 2021 after five months of hard development,at which point it is in lockstep with the 32bit ARM port and has been undergoing stability testing.I just finished the photo shoot for the Pinebook Pro hardware assembly documentation, and have a few more hours to spendto complete it, then begin the RockPro64 support.I'm now at the point where the documentation is the only remaining actions standing in the way ofa public release in -current form with support for the RockPro64 and Pinebook Pro Hardware Models.I'll assess the Raspberry Pi 4 support once the documentation is complete, and make a decision aboutwhen and what to release.

MoZes@slackware (Stuart Winter)

Hello!The SlackChat podcast season 2 episode 19 is up, and this time it's a Slackathon- finishing the Pinebook Proinstaller support. Brent shows us the progress with the Raspberry Pi 4 integration.

Enjoy!

MoZes@slackware (Stuart Winter)

Hello!Slackware ARM 15.0 beta is released! There are somemajor changes under the hood, somake sure you read the release announcement.

Enjoy!

MoZes@slackware (Stuart Winter)

Hello!After a long three-month slog, the SlackwareAArch64 OS build is complete and is in sync and being developed in lockstep withSlackware ARM(32). There is still work to do around hardware support and more integration work around thebuild system, and some installer improvements I want to make before it's released in -current form. Watch this space forupdates!

We're talking about the progress and some of the technical details in theSlackware ARM youtube channel - so check that out. More episodes are coming!

Funding through donations towards the effort are also appreciated!As always, please donate to Patrick first (details are in my Patreon) and the ARM port 2nd.

MoZes@slackware (Stuart Winter)

Season 2 of the SlackChat podcast is on the newSlackware ARM youtube channel!

This season we'll be able to show you behind the scenes of how the port is developedand maintained, and we'll cover the development of SlackwareAArch64 too!

MoZes@slackware (Stuart Winter)

Happy new year (although I'm not sure if there's a date by when you need tostop doing that!).

Some news on the Slackware ARM port. I have had a number of donations to the project since it beganand once again I thank all of those who have made them.

As with all Open Source projects, there's a great deal of commitment from thedevelopers to continue to maintain and support the project you're using. Inthe case of Slackware we have Patrick Volkerding and the rest of the team(including myself) donating their time free of charge.

As always, without Patrick Volkerding, Slackware ARM would cease to exist; soplease in the first instance pleaseshow your support and commitment.

I've also set up aPatreon accountfor the users of the ARM port toprovide a commitment and demonstrationof support and a recognition of the value.

I'll be continuing to maintain and develop the port and distribute it free ofcharge because I enjoy the creative challenges. However, it has to now contendwith other projects. Therefore I've set up a Patreon account for the users ofthe ARM port to provide a commitment and demonstration of support, which helpsme prioritise.

Thanks
Stuart Winter (MoZes)

Linux 5.4.2 packages are now available in the main tree for all supported systems. That was the easiestand smoothest major upgrade in about fifteen years! Hats off to the Linux developer community.

Thanks toThoughtLynx for their various resources and help.

Thanks toTekLinks inBirmingham, AL, for providing colocation and bandwidthto this machine.