Arduino library for communicating with Nintendo extension controllers

• UpdatedMay 11, 2021
• C++

A Wiki about common mistakes when using the Arduino Wire library.

• UpdatedJan 3, 2021

Arduino Library for the TEA5767 Radio Module

• UpdatedDec 19, 2021
• C++

Two-Wire Interface (TWI) library for Arduino

• UpdatedJun 16, 2018
• C++

This is a Raspberry Pi RFID HAT Module operating in the 125Khz frequency range. It supports two communication interfaces: UART for RFID and I2C for Oled Display.

• UpdatedOct 1, 2020
• Python

Arduino library for the iAQ-core indoor air quality sensor module with I2C interface

• UpdatedAug 17, 2019
• C++

A simple driver for ESP8266 enthusiasts out there to drive MCP23017 16-bit IO Expander

• UpdatedFeb 21, 2017
• C

FramI2C is an Arduino library for FRAM (F-FRAM, Ferroelectric RAM) non-volatile memory chips with I2C interface. Supports most common Cypress and Fujitsu I2C FRAM chips with densities of 4, 16, 64, 128, 256, 512, and 1024 kilobits (kb). Provides simple, easy to use read() and write() methods for reading/writing integral and floating point types …

• UpdatedNov 20, 2021
• C++

I2C bus wire length extension module. Enabling the use of more extensive bus interconnection.

• UpdatedJul 19, 2024
• HTML

USB device to I²C master adapter with Linux kernel support

• UpdatedDec 7, 2024
• HTML

This library is useful for FAST communicating with i2C or SMBus or PMBus devices using FTDI adapters. Typical message to message transmission delay is less than 1 millisecond.

• UpdatedDec 17, 2021
• Python

Arduino library for the ENS210 relative humidity and temperature sensor with I2C interface from ams

• UpdatedJun 28, 2024
• C++

A wrapper around the Arduino Wire library for easier interfacing sensors.

• UpdatedFeb 16, 2023
• C++

Benchmark for esp-idf i2c driver

• UpdatedApr 14, 2024
• C

FTDI FT232H MPSSE EEPROM Read / Write in Windows Python

• UpdatedJul 29, 2019
• Python

Bus and Device classes for i2c-bus, with promised functions.

• UpdatedApr 28, 2025
• TypeScript

Raspberry Pi I2C bus scan detection program. Detects I2C 7-bit address and prints them to screen. Scan for I2C devices, to see if any slaves are present on the I2C bus. Uses bcm2835 Library not linux drivers, designed for users of bcm2835 library

• UpdatedDec 9, 2024
• C++

Custom i2c modules and ip cores

• UpdatedFeb 16, 2018
• Verilog

A .NETMF v4.3 class for MCP342x : 18-Bit, Multi-Channel ΔΣ Analog-to-Digital Converter with I2C Interface and On-Board Reference

• UpdatedAug 20, 2018
• C#

ESP-IDF component to manage multiple devices on the same I2C port

• UpdatedDec 17, 2023
• C