Operator | Tokyo Institute of Technology |
---|---|
COSPAR ID | 2021-102F![]() |
SATCATno. | 49400![]() |
Spacecraft properties | |
Manufacturer | Tokyo Institute of Technology |
Launch mass | 55 kg (121 lb) |
Dimensions | 50 × 50 × 50 cm (20 × 20 × 20 in) |
Start of mission | |
Launch date | 9 November 2021, 00:55UTC |
Rocket | Epsilon (No. 5) |
Launch site | Uchinoura Space Center |
Contractor | JAXA |
Orbital parameters | |
Reference system | Geocentric orbit (planned) |
Regime | Sun-synchronous orbit |
Perigee altitude | 560 km (350 mi) |
Apogee altitude | 560 km (350 mi) |
Inclination | 97.6° |
Instruments | |
Ultraviolet telescope | |
HIBARI is a space mission byJapan for amicrosatellite that would test a newattitude control (orientation) method to achieve high accuracy pointing for its small telescope, and was launched on 9 November 2021 by anEpsilon launch vehicle as part of theInnovative Satellite Technology Demonstration Program-2 mission.[1] The key technology to be tested onHIBARI is called "Variable Shape Attitude Control" (VSAC), and it is based on reaction torque by rotating its four solar array paddles.
HIBARI is a space mission by the Japanese scientists from theTokyo Institute of Technology to develop high pointing stability and agile maneuvering of a small satellite by using reaction torque of the satellite's structure.[2][3] This technology, first presented in 2016,[4] is hoped to substitute the use ofreaction wheels andcontrol moment gyroscopes (CMG), which arguably have difficulty achieving both agility and stability simultaneously.[2] This capability would be useful for a very fast response to observe in the direction of gravitational waves or other transient astrophysical phenomena.[3]
The spacecraft is a 55 kg (121 lb) microsatellite configured in a 50 cm (20 in) cube,[3] where half of it would carry a smallultraviolet telescope to verify the pointing stability (< 10 𝑎𝑟𝑐𝑠𝑒𝑐2) and accuracy of the VSAC system. The orientation high accuracy would be achieved by rotating the arms of its four solar arrays in an orthogonal axis.[2]Solar cells would be mounted on both sides of each of four solar array paddles.[3]