Dynamic load testing (ordynamic loading) is a method to assess apile'sbearing capacity by applying a dynamic load to the pile head (a falling mass) while recording acceleration and strain on the pile head. Dynamic load testing is ahigh strain dynamic test which can be appliedafterpile installation for concrete piles. For steel or timber piles, dynamic load testing can be done during installation or after installation.
The procedure is standardized by ASTM D4945-00 Standard Test Method for High Strain Dynamic Testing of Piles. It may be performed on all piles, regardless of their installation method. In addition to bearing capacity, Dynamic Load Testing gives information on resistance distribution (shaft resistance and end bearing) and evaluates the shape and integrity of the foundation element.
The foundation bearing capacity results obtained with dynamic load tests correlate well with the results ofstatic load tests performed on the same foundation element.[citation needed]
![]() | This article about acivil engineering topic is astub. You can help Wikipedia byexpanding it. |