Our Goal: We aim to reduce our net Scope 1 and 2 carbon emissions by 100% by 2030 vs. a 2020 baseline.²

Scope 1 and 2 emissions are those generated by activities in Haleon’s operational control, either from the direct burning of fossil fuels or indirectly from the energy we procure. They make up about 8% of our total value chain carbon footprint. Our Scope 1 and 2 carbon reduction strategy focuses on three areas:

• Decarbonising our heat production by electrifying our heat, switching fuels, and abating any remaining emissions through additional and high-quality carbon offsets.
• Reducing our energy consumption by switching to renewable energy sources for our electricity, through installation of renewable energy sources on or near our sites, or by procuring renewable electricity.
• Driving energy reduction through energy efficiency and management programmes.

^{2 Our goal to reduce net Scope 1 and 2 carbon emissions by 100% by 2030 is underpinned by a 95% absolute reduction target.} 

Our Goal: We aim to reduce our Scope 3 carbon emissions from source to sale by 42% by 2030 vs a 2022 baseline.³

Scope 3 emissions are those generated throughout our supply chain, from the raw materials we use to manufacture and package our products, to the consumer use and disposal of them. Emissions generated by the raw materials, active pharmaceutical ingredients, packaging and services we buy and use to make our products make up the bulk of our carbon emissions, and are our key focus for lowering our carbon footprint. We have identified the key contributors to our Scope 3 emissions and are focused on systematically reducing their impact.

Our Scope 3 emissions-reduction strategy is focused on three areas:

• Optimise: short-term actions we can take to decarbonise across our value chain, driven by the co-benefits of other environmental initiatives (for example, right-sizing our packaging and switching from virgin plastic to recycled plastic) and by working with our suppliers to incentivise their transition to renewable energy.
• Re-engineer: reducing and/or replacing carbon emission-intensive raw and packaging materials.
• Re-invent: re-designing product formats and formulations to dramatically reduce their carbon emission footprints.

^{3 Our Scope 3 carbon emissions target spans carbon emission categories from source to sale (excluding GHG protocol categories 6, 7, 10-15). It covers mandatory Scope 3 upstream and downstream emissions. It excludes indirect consumer use-phase emissions, such as emissions associated with water used with our products.}

Virgin Plastic Reduction

Our Goal: We aim to reduce our use of virgin petroleum-based plastic by 10% by 2025, and a third by 2030 vs a 2022 baseline.⁴

We are seeking to deliver a significant virgin plastic reduction through a combination of:

• Optimising our packaging to reduce the absolute amount of material we use through more compact design, for example, reducing headspace, and right-sizing our packaging.
• Substituting virgin plastic with alternative resins, for example, recycled plastic and bio-resin, as alternative feedstocks to virgin petroleum-based plastic.
• Innovating to develop new packaging formats, for example, new-to-industry technologies and materials, and new product formats, packaging solutions, and/or delivery models such as reuse and refill.

Recyclability

Our Goal: We aim to develop solutions for all product packaging to be recycle-ready⁵ by 2025 as part of our goal to make all packaging recyclable or reusable by 2030, where safety, quality and regulations permit.

Making our packaging recycle-ready is a key milestone to achieving recyclability, whereby a packaging format is effectively collected, sorted and recycled in practice and at scale in at least one region.

Our packaging content is made up of several different raw materials. Paper packaging accounts for about half of our packaging footprint, the vast majority of which is recycle-ready today. For our plastic packaging, our primary focus for recycle-ready is on our products sold in tubes and bottles as these formats account for the largest share of our plastic packaging.

Our approach for recycle-ready is to:

• Remove problematic plastics (for example PVC).
• Move to mono-material packs, transitioning out of composite packaging that is hard to recycle (e.g. moving our toothpaste packaging out of aluminium barrier layer tubes into mono-material HDPE plastic tubes)
• Pick materials that are compatible with existing and emerging recycling streams.

^{4 Scope includes product packaging and some devices, including toothbrushes.}

^{5 Recycle-ready refers to product packaging and devices that are made of materials that are proven to be compatible with existing or emerging recycling infrastructure. In line with the CDP definition of ‘technical recyclability’, this does not take into account whether the collection, sorting and recycling of the packaging or device happens in practice, at scale, and with reasonable economics.}

The annual volume of palm oil derivatives that Haleon uses is low in comparison with total global palm oil production volumes. Nevertheless, we take our responsibility to address our impacts seriously.  We are working to sustainably source palm oil derivatives with certifications that also allow us to improve the palm oil traceability and transparency in our supply chain. We use recognised global certification programmes wherever possible, for example Roundtable on Sustainable Palm Oil Mass-Balance (RSPO MB). Haleon is also a member of Action for Sustainable Derivatives (ASD), a collaborative initiative that brings together companies in the cosmetics, home, personal care, and oleochemicals industries to collectively tackle supply chain issues regarding palm oil and palm kernel oil.

Our Goal: We aim for all of our key agricultural, forest and marine-derived materials used in our ingredients and packaging to be sustainably sourced and deforestation-free by 2030.⁶

6 Scope includes Haleon’s globally managed spend on key materials that are agricultural, forest, or marine-derived. Globally managed spend covers the majority of our internal spend and expands across some of our third-party manufacturing network.

Paper packaging accounts for about half of our packaging footprint, the vast majority of which is recycle-ready today. Sourcing our paper packaging sustainably is also important when evaluating the environmental impact of packaging. We aim to achieve deforestation-free supply chains by 2030 for our paper-based packaging and other key forest, agriculture or marine-derived materials.⁷ To achieve this we are working with our suppliers, with the aim of ensuring all our paper-based packaging comes from recycled or certified sources, including Forestry Stewardship Council (FSC), Programme for the Endorsement of Forest Certification (PEFC), or other well-recognised ‘Chain of Custody’ Certified sources.  

Our Goal: We aim for all of our key agricultural, forest and marine-derived materials used in our ingredients and packaging to be sustainably sourced and deforestation-free by 2030.⁷

7 Scope includes Haleon’s globally managed spend on key materials that are agricultural, forest, or marine-derived. Globally managed spend covers the majority of our internal spend and expands across some of our third-party manufacturing network.

In 2023 we established our Healthy Mint Supply Chain Programme, which aims to uphold robust health and safety standards in mint farming, improve farmers’ livelihoods, and support better health in mint growing communities, while reducing the environmental impact of mint production.

Our Goal: We aim for all of our key agricultural, forest and marine-derived materials used in our ingredients and packaging to be sustainably sourced and deforestation-free by 2030.⁸

^{8  Scope includes Haleon’s globally managed spend on key materials that are agricultural, forest, or marine-derived. Globally managed spend covers the majority of our internal spend and expands across some of our third-party manufacturing network.}

^{Image credit: Firmenich}

We are working to embed circular economy principles to address waste in our own operations. We want to move our manufacturing waste towards greater circularity by certifying our sites using the TRUE (Total Resource Use and Efficiency) certification system, which seeks to change the way materials flow through society so that they are reused and recycled.

Our Goal: We aim to achieve TRUE certification at all our manufacturing sites by 2030.