Movatterモバイル変換

Color Your Bullet Tips to Define Shot Groups at Long Range

When shooting groups at long range on paper it can be difficult to distinguish which bullet holes belong to a particular sequence of shots. If, for example, you shot three 5-shot groups at 600+ yards on a paper target, you would have 15 bullet holes on the target (assuming no misses). But at that distance it would be difficult to see the holes on target (even with a spotting scope). Accordingly, when you inspected the target up close, it would be hard to tell which shots belonged to which group. You might have a vague idea, but couldn’t be sure, without a target camera recording the shot sequence.

Here is a method to separate multiple shots into specific groups so you can better evaluate your load and shooting skills. The trick is pretty simple — mark your bullets with a color from a Sharpie or other felt marking pen. If you are shooting three 5-shot groups, mark five with red, five with green, and five with blue (or purple). Then, when you inspect the target, you can identify the group placements by the colors that appear on the paper.

Round Robin: Using colors you can shoot “Round-Robin” to evaluate seating depths, neck tension, or other variables without having the shot order (and barrel heating) affect group sizes unequally. For example you might have three different neck tensions, each marked with a different color on the bullets. Then shoot Red, Blue, Green in that sequence for five total shots per color.

Smart Tip to Show Colors More Vividly

If the bullet inks are not showing up on your target paper clearly, here is a simple trick that can make the colors “bleed” to be more visible. In your range kit, bring some alcohol solution along with some Q-tips. Then dab the shots on the paper target lightly with wet Q-Tips. Here is the front of a target before and after application of alcohol:

Forum Member NewbieShooter explains: “Dabbing a bit of alcohol on the bullet holes with Q-Tips makes the color pop a bit… especially on the back side.” See below:

In short order you will see the colors spread into the paper, clearly marking the shot holes by distinguishing colors. If you were shooting a dark bullseye, view the the BACK side of the target to see the colors on a light background.

Credits: Bullet Tips photo by Forum Member Dave Way; Target photos by Forum Member NewbieShooter; Story tip from Boyd Allen.

Access 3+ Years of Shooting Industry Magazine for FREE

If you want to stay current with trends in the firearms industry, and see important new product releasesbefore they hit dealers’ shelves, you should check outShooting Industry magazine. While tailored for firearms/outdoor gear retailers and industry professionals, this monthly journal also provides valuable information for all gun owners. We read Shooting Industry to learn about sales trends, new products, and current gun laws issues.

READ for FREE — Shooting Industry Magazine is available in adigital format for FREE. The archives go back to January 2022 — giving you instant access to 40 FREE issues.

Get FREE Digital Shooting Industry Magazines for the Past 3+ Years
You can access, for free, three years of Shooting Industry back issues (2024, 2023, 2022), PLUS all the latest 2025 issues.CLICK HERE for the 2025 issues along with previous issues back through January 2022.

Below we’ve included quick links to the four most recent Shooting Industry editions — January 2025, February 2025, March 2025, and April 2025. These four monthly magazines can be read online for free. Also, as they are in PDF format you can easily print all or part of these monthly magazines. Simplyclick each cover to read full issue for FREE:

Along with the four 2025 issues, there are 36 more digital editions ofShooting Industry Magazine available for FREE on the web. Every monthly issue for years 2024, 2023, and 2022 is available online. Simply visit theMagazine Archive Page and scroll down top to bottom.

To access prior year monthly editions,CLICK HERE to access the Shooting Industry Digital Archives page with links for all 2024, 2023, and 2022 monthly issues.

Long-Term Powder Storage — What You Need to Know

Ever wondered about the stability of the propellants in your reloading room? There are some important things you should know about powder storage, to ensure consistent powder performance and safety. Western Powders (which has been acquired by Hodgdon) published an informative Q & A series entitledDear Labby: Questions for our Ballistics Lab. Here are some excerpts that pertain topowder storage and shelf life. Worried that your powder may be too old? Western’s experts explain how to check your propellants for warning signs.

Proper Powder Storage

Q: I live in southern Arizona where it is very hot. I am told powders will become unstable if stored in an area not air-conditioned. My wife says no powder or primers in the house. Can powder be stored in a refrigerator? What about using a fireproof safe? I would appreciate your ideas. — M.C.

Lab Answer: SAAMI guidelines are pretty clear on issues of storage. They recommend storing smokeless powder in containers that will not allow pressure to build if the powder is ignited — ruling out gun safes and refrigerators.

CLICK HERE to Read SAAMI Guidelines for Powder Storage (PDF)

In their original containers, the lifespan of smokeless powders is quite long, even in hot, arid climates. In fact the lifespan is typically longer than the average handloader would need to store them. Stored safely in a garage or outbuilding, your powder should last years.If you see the powder developing a reddish tint, or giving off a foul odor, it is time to discard it.

Clumps in Powder Container

Q: I ordered some of your Accurate 1680 powder back about in December. I just now opened it … and it is full of clumps. My knowledge tells me that means moisture. Am I wrong? I just now broke the seal and it has been stored in a ammo can with desiccant packs around it and a dehumidifier running 14-16 hours a day. I can’t imagine this being my fault, if this does indicate moisture. I don’t know if the pink part on the label is suppose to be red or not, but it is definitely pink, so if it was red I am wondering if I was shipped an old container? I hope that this isn’t bad and I am stuck with it…

Lab Answer: All powder contains a certain amount of moisture. When the powder is stored or during shipping, it can go through temperature cycles. During the cycling, the moisture can be pulled to the surface and cause clumping.Clumping can also be caused by static electricity if too dry or the powder has limited graphite content. You can break up the clumps before metering and they shouldn’t be a problem. This will not affect the powder performance, so your product is fine. Accurate 1680 labels are designed in Pink. As a side note, specification for testing powder is at 70° F and 60% humidity.

Shelf Life and Packaging Dates

Q: Does powder ever get to old to use and what identifying marks does your company put on the canister for when it is made, You have helped me out a while ago when I asked about keeping my cowboy shooting under 950 fps and it works great less stress on the hand and the recoil is very minimum. — R.B.

Lab Answer: On one pound bottles, the number is on the corner in a silver box. If the powder was poured today, it would read 012815 followed by a lot number. The whole number would look something like 012815749. Eight pound bottles have a sticker on the bottom with an obvious date code. The lot number appears above the date.

Six Handsome Handguns from Forum Member’s Collection

In ourShooters’ Forum there is apopular photography thread. Along with some great nature and hunting images, you’ll find quality photos of handsome firearms. Among the many images were head-turning photos of some very impressive pistols belonging to Forum member Beiruty from Texas. He has some of the most handsome mag-fed handguns we’ve ever seen. Here are six of his favorite semi-auto pistols from his collection. Three of these handguns boast beautiful engraving.

FN Browning High Power Renaissance
This 9mm hand-engraved High Power with silver finish was made in Belgium in 1971:

NOTE: This is one of a near-matching pair of FN HP Renaissance pistols featured in the top photo.

Hämmerli .22 LR Model 208, Special Edition
This Special Edition, one of 500, marks 125 years of Hämmerli Sportwaffenfabrik (1863-1988):

The handsome grip is factory carved. This Model 208 pistol shipped in a fitted case, shown below.

Colt .45 ACP 1911 Commander
This 1975-vintage Colt Commander 1911 sports fully-engraved frame and slide:

Smith & Wesson .22 LR Model 41 Long Barrel
This target pistol features a 7-3/8″ barrel with factory compensator. Grip is custom:

Browning .22 LR Medalist Pistol
This handsome Browning Medalist, all factory standard, was made in Belgium in 1964:

The video below shows another Browning Medalist of the same design and relative vintage:

Stoeger Arms American Eagle Navy Model Luger
This stainless StoegerNavy Model 6″ Luger Pistol is vintage 1978-1980:

Protect Your Vision — Use Quality Eye Protection

Proper eye protection is ‘must-have’ gear for shooting sports. In addition to providing reliable impact protection, good shooting glasses should be comfortable, fog-free, and not interfere with your preferred hearing protection. Those who require corrective lenses also need to consider the various options available. In a past episode of theirWeekly Gear Review, the 6.5 Guys discuss a variety of shooting glasses they have tried, including examples from DeCot, Oakley, and Wiley-X. Ed and Steve outline the key considerations when choosing eye protection, and then review practical aspects of eyewear design and construction that enhance comfort and functionality in the field.

READ FULL ARTICLE ON 65Guys.com »

The 6.5 Guys (Ed and Steve) offer a number of smart tips consider safety eyewear, helping you select the most effective safety glasses at an affordable price. Here are the 6.5 Guys’ KEY Take-aways when choosing shooting glasses, including prescription eyewear:

Key Things To Consider When Choosing Eye Protection

1. Avoid polarized lenses or lenses that reduce light transmission significantly (except for action shooting in very bright conditions with large, close targets).

2. Avoid frame designs that interfere with prone shooting.

3. Avoid designs that easily fog.

4. Avoid frame designs with thicker temples that are uncomfortable to wear underneath hearing protection.

5. Select lenses with an appropriate degree of ballistic protection.CLICK HERE to learn more about eyewear safety standards.

6. When you get your prescription, be sure your ophthalmologist includes the interpupillary distance. This is a critical measurement particularly for heavier prescriptions.

7. If you have a complicated prescription select a vendor who will actually spend time with you to address any concerns.

Horrific .50 BMG Kaboom — Eye Saved by Protective Eyewear

Think you don’t need eye protection? Watch this video starting at 4:10. The screw-on barrel “cap” (chamber closure) of the .50 BMG action flies into the shooter’s face. Without eye protection the shooter would have definitely lost his right eye. (See video at 5:20 for analysis).

Safety First — Your Eyes Are Irreplaceable
Accurate shooting begins and ends with the human eye. Your career as a marksman could be cut short if you don’t use good eye protection every time you go to the range and/or handle a firearm.

Every year, over 1,000,000 people suffer serious eye injuries. Shooting is hazardous; it is estimated that there are 30,000 firearms-related eye injuries each year (if you include paintball sports.) After paintball, general hunting accidents comprise most firearms-related eye injuries.

Quality eye protection need not be expensive. You can find comfortable, ANSI Z87.1-certified shooting glasses for under $10.00.

If you select shooting glasses carefully, and ensure that your eyewear is safety-certified, inexpensive shooting glasses can perform very well. But you need to avoid cheap, soft-plastic lenses that claim “impact resistance” without satisfying a testing standard.

For more comprehensive information on safety eyewear, read the AccurateShooter’sGuide to Eye Protection for Shooters.

Air Travel with Rifles — Smart Tips on Packing and Re-Zeroing

Savage Arms offers a series ofShooting Tips in theSavage Blog. Here is a helpful article from Team Savage Shooter Stan Pate. This covers how to ship your rifle safely, and then re-establish zero properly when the gun is reassembled after transport.

Traveling with Firearms — Important Advice

Traveling with firearms can be stressful. You must comply with multiple regulations and then trust your expensive guns to airline baggage handlers. And after arrival you’ll need to put your rifles back together and confirm the zeros. This article offers helpful travel advice from Team Savage shooter Stan Pate. Pate has traveled the globe competing with match rifles. Here he shares his tips for making trips easier on you and your firearms.

Easier Air Travel With Firearms
TSA isn’t nearly as careful with your rifles as you are. Proper storage before sending your firearm up a conveyer belt and into the belly of a plane is critical. Stan Pate spends lots of time each year traveling the skies and has devised a system for keeping his rifle safe when going to and from.

“Never travel with your firearm completely assembled,” Pate cautions. “A fully assembled firearm is much heavier [as a total unit] than one that has been broken-down and stored [in separate sections]. More weight creates more in-the-case movement, which can result in damage. I learned this the hard way years ago. My rifle was actually broken in half when traveling to an international competition. Record your torque settings, use those settings during reassembly and your return to zero should be no problem.”

“Be sure to check on current TSA rules and regulations before travel to be aware of any changes that may effect how you pack your rifles,” says Pate.

Rifle Reassembly and Resetting Zero
The quicker you can reestablish your zero, the quicker you can relax and stop worrying about if your rounds are going to hit their mark during competition. Pate, over the years, has developed a system for rifle reassembly and getting back to zero as quickly as possible. While his torque settings may not be the same as yours, the process can still be used.

“The barreled-action goes back on the stock, and then I tighten all three receiver screws finger tight,” says Pate. “Next, I tighten the front two receiver screws down to 35-inch pounds. The rear receiver screws on this particular rifle likes 15-inch pounds. [Note: Proper torque settings will vary with your action and stock type. Most actions have TWO screws, not three.] Scope attachment comes next, and I follow manufacturer settings when tightening it down. All that’s left to do now is go zero your rifle.”

This video explains an efficient method to Re-Zero your rifles

CMP Eastern Games Are One Month Away — Register Now

TheCMP Eastern Games will run April 25 through May 4, 2025 at the Camp Butner Training Facility in North Carolina. This popular event, part of CMP’s Travel Games series, combines competitions and educational clinics open to adults and juniors of all experience levels.CLICK HERE to learn more about the CMP Eastern Games and to access theEastern Games Registration Page.

» VIEW and Download 2025 CMP Eastern Games Match Program

There will be modern and vintage military rifle competitions, like the Springfield, Carbine, and John C. Garand Matches, as well as the .22 Rimfire Sporter Rifle Match and Vintage Sniper team event. Mid-Range 3×600 and 1,000-yard Long Range matches, added to Eastern Games in recent years, will also make a return in 2025, as well as CMP Cup Rifle Matches – comprised of 4-Man Team, 80 Shot and EIC Rifle competitions. All rifle matches will be fired on advanced CMPelectronic targets, removing pit duty. That allows matches to be concluded more quickly.

Long Range Competition at CMP Eastern Games

The newest addition to the CMP Eastern Games is the Long Range program for Palma rifles, service rifles, and F-Class rifles. KTS (Kongsberg Target System) electronic targets were used for this match as well as all other rifle matches. Shown above is a Long Range competitor shooting with scoped Eliseo Tubegun. Note the viewing screen for electronic target. In addition to the Long Range Rifle matches, there will be a mid-range 3×600 match, EIC Rifle match, 80-shot HP match, Carbine Match, Vintage Sniper Match, 4-Man Team match, and other rifle competitions.

Garand, Springfield and Modern Military (GSMM) Matches

Like other Travel Games events, those competing in the John C. Garand Match with As-Issued M1 Rifles will have the chance to earn a GCA (Garand Collectors Association) Master Marksman medal.

Service Rifle Competition at CMP Eastern Games

There will be multiple matches for modern service rifles. Current rules allow ARs to be fitted with optics. In CMP and NRA service rifle competitions using AR-15 platform rifles, scopes are allowed with a maximum magnification of 4.5X and a maximum objective lens of 34mm, and the rifle, including the optic, must weigh no more than 11.5 pounds.

Rimfire Sporter Competition at CMP Eastern Games

The CMP expects a high turn-out of Rimfire Sporter class competitors. Rimfire Sporter competition is conducted with relatively inexpensive .22 LR production rifles and is a good way to enjoy a CMP match without a huge investment in rifle, fancy optics, and shooting gear.

Pistol Competition at the CMP Eastern Games

The Eastern Games will include multiple pistol competitions including Centerfire, .45 and .22 Pistol 900 Aggregates and a Service Revolver EIC Match. Those interested in learning more about the sport may also sign up for the Pistol Marksmanship 101 courses taught by certified CMP instructors.

For more information about the CMP and its programs, visitTheCMP.org.

How to Properly Set Up and Adjust Decapping Dies

One of our Forum members complained that he wasn’t able to set his primers flush to the rim. He tried a variety of primer tools, yet no matter what he used, the primers still didn’t seat deep enough. He measured his primers, and they were the right thickness, but it seemed like hisprimer pockets just weren’t deep enough. He was mystified as to the cause of the problem.

Well, our friend Boyd Allen diagnosed the problem. It was thedecapping rod. If the rod is adjusted too low (screwed in too far), the base of the full-diameter rod shaft (just above the pin) will contact the inside of the case. That shaft is steel whereas your case is brass, a softer, weaker metal. So, when you run the case up into the die, the shaft can actually stretch the base of the primer pocket outward. Most presses have enough leverage to do this.If you bell the base of the primer pocket outwards, you’ve essentially ruined your case, and there is no way a primer can seat correctly.

The fix is simple. Just make sure toadjust the decapping rod so that the base of the rod shaft does NOT bottom out on the inside of the case. The pin only needs to extend through the flash hole far enough to knock the primer out. The photo shows a Lyman Universal decapping die. But the same thing can happenwith any die that has a decapping rod, such as bushing neck-sizing dies, and full-length sizing dies.

Whenever you use a die with a decapping pin for the first time, OR when you move the die to a different press, make sure to check the decapping rod length. And it’s a good idea, with full-length sizing dies, to always re-check the height setting when changing presses.

There are a variety of decapping dies currently on the market, with models available fromLEE,Lyman, Hornady,RCBS,Redding, andSinclair Int’l.

LEE Universal Decapping Die Costs Just $11.49
Speaking of decapping tools, Midsouth Shooters Supply sells theLEE Universal Decapping Die for just $11.99 (item 006-90292), a very good deal. There are many situations when you may want to remove primers from fired brass as a separate operation (prior to case sizing). For example, if your rifle brass is dirty, you may want to de-cap before sizing. Or, if you load on a progressive press, things will run much more smoothly if youdecap you brass first, in a separate operation.

Decapping Dies for Cases with Smaller Flashholes

TAKE NOTE: Some Euro Small Flash Holes are spec’d at 1.5mm or 0.059″, and max out at about .062″, so these need a smaller die pin.

The low-cost LEE Universal Decapping Die will work with cartridges from 17 Fireball all the way up to big Magnums. However, NOTE that the decapping pin supplied with this Lee die is TOO LARGE for LAPUA 220 Russian, 6mmBR, 6.5×47, 6.5 Creedmoor, .308 Win (Palma) and Norma 6 PPC flash holes. Because the pin diameter is too large for these brass types, you must eitherturn down the pin, or decap with a different tool for cases with .059-.062″ flash-holes.

Sinclair Int’l offers aStainless Decapping Die that comes with BOTH .080 and .060 Pins. The $46.99 die ships with three decapping pins for standard .080″ flash holes, and two pins for .060″ flash holes.

Redding makes aUniversal Decapping Die with an optional smaller-diameter decapping rod for the smaller .059-.062″ flash holes found on the BR and PPC cases. The use of this die is explained in the video below:

BargainFinder 496: AccurateShooter’s Deals of the Week

At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware thatsale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.

NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.

1. Palmetto SA — SIG Sauer Tango Optic Sale, SAVE Hundreds

⏺️Major savings on wide variety of SIG Sauer Tango optics

If you need a tactical, PRS/NRL, or hunting rifle scope check out theSIG Sauer Tango optic sale at Palmetto State Armory. There are some great deals, with discounts up to $790. For an AR, grab a SIGTango MSR 1-6x24mm for just $319.99, a $180 savings. Or if you want a high magnification 6X zoom scope for PRS/NRL consider the SIGTango 4-14x44mm SPR scope for just $199.99, a $100 discount.CLICK HERE to view all SIG Sauer Tango optics on sale.

2. CDNN Sports — Sauer & Sohn 100 Hunting Rifles, $599.99

⏺️Liquidation Sale on quality Sauer & Sohn rifles — save $350-$450

Right now you can get major savings (up to 47%) onSauer & Sohn Model 100 Hunting Rifles in a wide selection of chamberings. With this liquidation sale, you can save $350 to $450 on excellent hunting rifles with good triggers and smooth actions. TheseSauer 100 rifles have a 2.2-4.2 lb adjustable trigger, 22″ or 24″ hammer-forged barrel, and 4- or 5-rd detachable magazines. Chamberings include: 6.5 Creedmoor, 6.5 PRC, 7mm-08, 7mm Magnum, .308 Win, .30-06 Springfield, and .300 WinMag.

3. Midsouth — RCBS Buy Green Free Bullets Promotion

⏺️FREE Sierra or Barnes bullets with $100 or more RCBS product purchases

If you’re looking to grab a new reloading tool from RCBS you can now also get FREE bullets with Midsouth’sBUY GREEN, Get Premium Bullets Sale. Spend $100 and choose from a selection of free Sierra and Barnes bullets (quantity of 40 to 100 bullets). If you spend $400 you can choose from variety of 200-ct to 500-ct bullet packs. Those 500 free Sierra bullets could be worth up to $295 (for .308 168gr MatchKings) — so this is a great deal! NOTE: To get the FREE bullets you’ll need to fill out aRCBS Rebate Form.CLICK HERE for full chart of BUY GREEN free bullets.

4. Amazon — Caldwell Stable Table Deluxe, $202.82

⏺️Many positive user reviews — good set-up for varminting and home ranges

Spring is here so it’s time for fun shooting and varminting. If you want a good supported shooting option that can be transported in your vehicle, check out theCaldwell Stable Table Deluxe (#ad). This rotating range bench is stable and comfortable. The seat and tabletop pivot (rotate) around a center axis as a single unit so you can easily swing laterally from one target to the next. A bolt in the base allows position adjustment of a single leg, aligning the tabletop so that it is parallel with the horizon. This is great unit for varmint hunting. Owner reviews have been very positive.

5. Amazon — Feyachi TB-30 Double Rifle Case, $69.99

⏺️Nice double rifle case with shoulder straps and large outside pockets

Here’s a well-made, versatile double rifle case with multiple big outside pockets. This Feyachi TB-30 case is offered inBlack for $69.99 (#ad), andKhaki (FDE) for $79.99 (#ad) on Amazon. Green is not in stock yet.

The TB30 double rifle case is 42″ long x 12″ wide with adjustable Velcro straps to secure the guns. This TB-30 case includes a large 20″ x 9.5″ outer pistol bag with internal straps, plus a MOLLE system and multiple D-rings to secure additional gear. And, notably, the case boasts nicepadded shoulder straps for backpack-style carry.

6. Sportsman’s WH — Leupold Spotting Scopes, $274.97/$399.97

⏺️Save $100-$125 on good spotting scopes for hunting or competition

LeupoldSX-2 Alpine HD (High Definition) spotting scopes feature exceptionally clear glass and high light transmission, along with a great Leupold warranty. Right now you can save $100 to $125 on Leupold SX-2 spotters at Sportsman’s Warehouse. Choose the20-60x60mm SX-2 for $274.97 (31% Off), or the bigger20-60x80mm SX-2 for $399.97 (20% Off).

7. Amazon — Caldwell AR-500 Steel Targets, starting at $19.89

⏺️Great deals on durable AR500 steel targets — watch video below right

8. Amazon — Nightstand with Locking Gun Compartment

⏺️Nightstand with locking compartment, charging station, and lamps

Here is a remarkably useful item of furniture for your house. This handsome black Gurexl Nightstand is just$123.99 at Amazon (#ad), with a $10 Coupon box that can lower net cost to just $113.99 — a total steal. There is awhite version for $119.99 (#ad). This cool nightstand includes aside-mounted charging station with twin charging ports: USB and Type C. This nightstand also has a built-in LED light with adjustable brightness plus a motion sensor that can turn on the lights automatically when you approach (or get out of bed). NOTE: Some assembly is required — you’ll need to screw together the panels.

9. Amazon — TSA-Approved CVLIFE Five Handgun Case, $80.99

⏺️Excellent, rugged pistol case with great owner reviews

If you take multiple handguns to the range or frequently fly with multiple pistols, consider this ruggedCVLIFE Handgun Carry Case (#ad). It will hold 5 pistols (and magazines) securely, or you can carry a trio of pistols plus muffs, ammo, and other gear. Listed price is $89.99 on Amazon, but you can save 10% with Code CVLIFECASE, for a net cost of $80.99 (or try Code PHWUUX7R for possible 25% savings). Purchasers really like this case — it has 92% 5-star reviews. With shock-absorbing foam, precision-cut for a snug fit, this case protects gear for safe transport. This TSA-compliant 18″ hard case is a smart choice for gun guys who often travel with multiple pistols.

10. Graf & Sons — SnapSafe 2 Gun Keypad Vault, $59.99

⏺️Great price on versatile rapid access 2-gun security safe

If you want handy storage for two handguns or one pistol, watches, and other valuables, consider thisSnapSafe 2-Gun Keypad Vault, now just$59.99 at Grafs.com (54% off). Along with the keypad, there is a backup rotary key lock. The spring-loaded door opens immediately with your programmable code. A protective foam liner safeguards contents, the interior shelf is removable, and the base is pre-drilled so the vault can be bolted in place. This is a great deal — the very same SnapSafe 2-gun vault costs$134.99 right now at MidwayUSA — nearly twice as much.

As an Amazon affiliate, this site can earn revenues through sales commissions.

Cartridge Comparison — 6.5 Creedmoor vs. .308 Winchester

A new Vortex video series, Cartridge Talks Comparisons, looks at multiple variables along with ballistics gel tests to determine the comparative performance of popular cartridge types. Each Month, Cartridge Talks will examine and test two popular cartridges, comparing their head to head performance. In Episode 1, Vortex Nation™ hosts Mark Boardman and Ryan Muckenhirn pit the6.5 Creedmoor and .308 Winchester cartridges against each other, examining projectile performance. Mark and Ryan then make conclusions about the applications best suited to each cartridge type.

Cartridge Comparison 14-minute video, Highlighting Ballistic Gel Testing

This first Cartridge Talks Episode pits the 6.5 Creedmoor against the .308 Winchester in a head-to-head, ballistics gel-induced bullet battle. Ballistics (drop/drift), penetration ability, terminal performance and other variables are tested with a variety of tools and tests. Viewers are invited to check out Episode 1, and suggest future cartridge battles in the comments section.

Here is the full 67-minute 6.5 Creedmoor vs. .308 Win Cartridge comparison video:

“With the myriad of cartridges available to the big game hunter, picking which chambering is best for you and your application can be a daunting task,” says Muckenhirn. “In Cartridges Talks, we put our biases on the shelf and put as much scientific process to this as possible. From ‘shootability’ and accessibility, to terminal performance as observed in ballistics gel, Cartridge Talks wades through the numbers and figures with you, loads you up with the pertinent information, and helps you select the ideal cartridge for your next hunt!”

Vortex Nation Has10 MORE Cartridge Comparison Videos. Here are four we recommend.CLICK HERE to view all four videos.

How Krieger Cut-Rifled Barrels Are Crafted — Start to Finish

How Krieger Builds Barrels

This video shows the process of cut-rifled barrel-making byKrieger Barrels, one of the world’s best barrel manufacturers. Krieger cut-rifled barrels have set numerous world records and are favored by many top shooters. The video show the huge, complex machines used — bore-drilling equipment and hydraulic riflers. You can also see how barrels are contoured, polished, and inspected.

For anyone interested in accurate rifles, this is absolutely a “must-watch” video. Watch blanks being cryogenically treated, then drilled and lathe-turned. Next comes the big stuff — the massive rifling machines that single-point-cut the rifling in a precise, time-consuming process. Following that you can see barrels being contoured, polished, and inspected (with air gauge and bore-scope). There is even a sequence showing chambers being cut.

Click Arrow to Watch Krieger Barrels Video:

Here is a time-line of the important barrel-making processes shown in the video. You may want to use the “Pause” button, or repeat some segments to get a better look at particular operations. The numbers on the left represent playback minutes and seconds.

Krieger Barrel-Making Processes Shown in Video:

“At the start of World War Two, Pratt & Whitney developed a new, ‘B’ series of hydraulically-powered rifling machines, which were in fact two machines on the same bed. They weighed in at three tons and required the concrete floors now generally seen in workshops by this time. Very few of these hydraulic machines subsequently became available on the surplus market and now it is these machines which are sought after and used by barrel makers like John Krieger and ‘Boots’ Obermeyer. In fact, there are probably less of the ‘B’ series hydraulic riflers around today than of the older ‘Sine Bar’ universal riflers.” — Geoffrey Kolbe, Border Barrels.

Sunday GunDay: Tackdrivin’ .22 PPC Tubegun with Eliseo Chassis

We know thatCompetition Machine (Gary Eliseo) makes great chassis systems andPierce Engineering (John Pierce) makes great actions. But sometimes a project comes together even better than one can imagine. The folks atPierce Engineering crafted an Eliseo Tubegun that displayed some mind-blowing accuracy during initial testing. This was a special rifle built to a client’s spec in .22 PPC.

After his team completed the rifle, John Pierce took the Tubegun to the range to make sure everything was working right. The rifle was chambered for the .22 PPC, a known accuracy cartridge. Would this cartridge shoot in this gun? Heck yeah was the answer! The first two shots out of the gun were touching. That was promising enough. But then John drilled a five-shot group that was basically one hole! Here is that target. First two shots upper left, then the five-shot group below and to the right. Chassis-maker Gary Eliseo commented: “that’ll do just fine…”

Disclaimer: John shot some more groups with this Tubegun that were definitely NOT one-holers. That first five-shot masterpiece could not be duplicated. However, we’re told that the rifle shot other groups in the 2s, 3s, and 4s — impressive performance for a rifle designed for prone and position shooting. This shows how well the Pierce action mates to the Competition Machine chassis.

And if the owner ever wants to show off a “wallet group” for his new rifle — well he’s got that, thanks to John’s great trigger-pulling and rifle-building. Using On-Target software we measured that five-shot group at 0.189″ (see photo at right). That’s crazy small for a new gun with zero load development. That’s also a testimony to the quality of the Norma .22 PPC brass.

Why the .22 PPC Chambering?
The customer owns otherEliseo Tubeguns, but wanted something that combined extreme accuracy with very low recoil. He also wanted to be able to shoot factory brass without fire-forming. Norma makes very high-quality.22 PPC cartridge brass that is an easy load and shoot solution. In fact the folks at Pierce Engineering custom-loaded a quantity of .22 PPC ammo for this Tubegun and shipped it off to the customer along with the new rifle. NOTE: Loading ammo is not something that Pierce normally does, but this was a special client request.

Norma .22 PPC Cartridge Brass is available fromBullet Central for $75.99 for FIFTY (50) cases. That works out to$151.98 per 100. Yep that’s pricey considering that 6 years ago this same Norma brass was just $88.88 per 100 cases. But we have seen significant inflation in nearly all premium brass offerings.