TBOOX Open Source Project

• Xmake v2.9.1 released, Add native lua modules support

  2024-04-22

  xmake

  xmake lua C/C++ package cosmocc

  Xmake is a lightweight cross-platform build utility based on Lua.

  It is very lightweight and has no dependencies because it has a built-in Lua runtime.

  It uses xmake.lua to maintain project builds and its configuration syntax is very simple and readable.

  We can use it to build project directly like Make/Ninja, or generate project files like CMake/Meson, and it also has a built-in package management system to help users solve the integrated use of C/C++ dependent libraries.

  Xmake = Build backend + Project Generator + Package Manager + [Remote|Distributed] Build + Cache

  Although not very precise, we can still understand Xmake in the following way:

  Xmake ≈ Make/Ninja + CMake/Meson + Vcpkg/Conan + distcc + ccache/sccache

  • Github
  • Document

  Introduction of new features

  In the new version, we have added native tool chain support for Hongmeng system and implemented a new native Lua module import support. In addition, we have also made a lot of optimizations to the build speed, and the effect is very obvious.

  Add Hongmeng SDK tool chain support

  We have added native toolchain compilation support for the Hongmeng OS platform:

  $xmake f -p harmony

  xmake will also automatically detect the default SDK path. Of course, we can also specify the Harmony SDK path.

  $xmake f -p Harmony --sdk=/Users/ruki/Library/Huawei/Sdk/...

  Add native module support

  We know that in xmake, you can import some lua modules through the import interface for use in the script domain. However, if the operation of some modules is time-consuming, then lua implementation is not an ideal choice.Therefore, in the new version, we have added support for the native lua module, which can be implemented through native to achieve speed-up optimization. Moreover, importing and using the module is as simple as the lua module.

  When using native modules, xmake will perform two stages of compilation. First, it will automatically compile the native module, and then import the module into lua as a library or binary. For users, they only need to call import to import.

  Define dynamic library module

  The advantage of the dynamic library module is that it not only achieves performance acceleration through native, but also avoids the creation of additional sub-processes for each call, making it more lightweight and further improving the speed.

  We can first define a dynamic library module, which fully supports all C APIs of Lua, so we can also directly introduce some third-party open source Lua native modules for use.

  Here we also have a complete example of importing the lua-cjson module for reference:native_module_cjson

  First, we first implement the shared native code, so the interface is exported through the lua API.

  ./modules/foo/foo.c

  #include <xmi.h>staticintc_add(lua_State*lua){inta=lua_tointeger(lua,1);intb=lua_tointeger(lua,2);lua_pushinteger(lua,a+b);return1;}staticintc_sub(lua_State*lua){inta=lua_tointeger(lua,1);intb=lua_tointeger(lua,2);lua_pushinteger(lua,a-b);return1;}intluaopen(foo,lua_State*lua){//Collect add and substaticconstluaL_Regfuncs[]={{"add",c_add},{"sub",c_sub},{NULL,NULL}};lua_newtable(lua);// pass function listluaL_setfuncs(lua,funcs,0);return1;}

  Notice here that we have included an interface header file ofxmi.h. In fact, we can also directly introducelua.h andluaconf.h. The effect is the same, but it will provide better cross-platform performance. , it will automatically handle the differences between lua/luajit and versions internally.

  Then, we configureadd_rules("modules.shared") to compile as a shared native module without introducing any other dependencies.

  Even Lua dependencies do not need to be introduced, because the xmake main program has exported all Lua interfaces and can be used directly, so the entire module is very lightweight.

  ./modules/foo/xmake.lua

  add_rules("mode.debug","mode.release")target("foo")-- Specify the target as the library lua moduleadd_rules("module.shared")add_files("foo.c")

  阅读中文Read All

  ---

• Xmake v2.8.7 released, Add cosmocc toolchain support, build-once run-anywhere

  2024-02-25

  xmake

  xmake lua C/C++ package cosmocc

  Xmake is a lightweight cross-platform build utility based on Lua.

  It is very lightweight and has no dependencies because it has a built-in Lua runtime.

  It uses xmake.lua to maintain project builds and its configuration syntax is very simple and readable.

  We can use it to build project directly like Make/Ninja, or generate project files like CMake/Meson, and it also has a built-in package management system to help users solve the integrated use of C/C++ dependent libraries.

  Xmake = Build backend + Project Generator + Package Manager + [Remote|Distributed] Build + Cache

  Although not very precise, we can still understand Xmake in the following way:

  Xmake ≈ Make/Ninja + CMake/Meson + Vcpkg/Conan + distcc + ccache/sccache

  • Github
  • Document

  Introduction of new features

  In the new version, we have added cosmocc tool chain support. Using it, we can compile once and run everywhere. In addition, we also refactored the implementation of C++ Modules and solved many C++ Modules-related problems.

  Cosmocc toolchain support

  The cosmocc tool chain is the compilation tool chain provided by thecosmopolitan project. Programs compiled using this tool chain can be compiled once and run anywhere.

  In the new version, we also support this tool chain, which can compile programs under macosx/linux/windows, and can also support automatic downloading of the cosmocc tool chain.

  For users, they only need to configure the xmake.lua project file and then execute thexmake command to achieve one-click compilation and run it everywhere.

  The content of xmake.lua is as follows. This is the most basic construction configuration of the hello world terminal program.

  add_rules("mode.debug","mode.release")add_requires("cosmocc")target("test")set_kind("binary")add_files("src/*.c")set_toolchains("@cosmocc")

  Then, we execute the xmake command, which will first download the integrated cosmocc tool chain, and then use this tool chain to compile the program.

  ruki:console$xmakecheckingforplatform... linuxcheckingforarchitecture ...x86_64note: install or modify(m) these packages(pass -y to skip confirm)?inxmake-repo:   -> cosmocc 3.2.4please input: y(y/n/m)=> install cosmocc 3.2.4 .. ok[25%]: cache compiling.release src/main.c[50%]: linking.releasetest[100%]: build ok, spent 1.548sruki:console$xmake runhello world

  阅读中文Read All

  ---

• Xmake v2.8.6 released, New Packaging Plugin: XPack

  2023-12-15

  xmake

  xmake lua C/C++ package performance API rust

  Xmake is a lightweight cross-platform build utility based on Lua.

  It is very lightweight and has no dependencies because it has a built-in Lua runtime.

  It uses xmake.lua to maintain project builds and its configuration syntax is very simple and readable.

  We can use it to build project directly like Make/Ninja, or generate project files like CMake/Meson, and it also has a built-in package management system to help users solve the integrated use of C/C++ dependent libraries.

  Xmake = Build backend + Project Generator + Package Manager + [Remote|Distributed] Build + Cache

  Although not very precise, we can still understand Xmake in the following way:

  Xmake ≈ Make/Ninja + CMake/Meson + Vcpkg/Conan + distcc + ccache/sccache

  • Github
  • Document

  Introduction of new features

  Before introducing new features, there is good news to tell you that the previous version of Xmake was included in the debian repository, and recently Xmake has entered the Fedora official repository. You can install Xmake directly on Fedora 39 through the following command.

  $sudo dnf install xmake

  Many thanks to @topazus @mochaaP for their contribution to Xmake. For related information, see:#941.

  Next, let’s introduce the heavyweight feature brought by the new version: XPack.

  It is similar to CMake’s CPack command, which can quickly package user projects to generate installation packages in various formats.

  Currently Xmake’s XPack already supports packaging in the following formats:

  • nsis: executable installation package under Windows
  • runself: shell self-compiled installation package
  • targz: binary file tar.gz package (green version)
  • zip: Binary file zip package (green version)
  • srctargz: source file tar.gz package
  • srczip: source file zip package
  • srpm: rpm source code installation package
  • rpm: rpm binary installation package

  In addition to the above-mentioned supported packaging formats, package formats such as deb are also being gradually supported, and users can also configure and generate custom package format files.

  阅读中文Read All

  ---

• Xmake v2.8.5 released, Support for link sorting and unit testing

  2023-11-05

  xmake

  xmake lua C/C++ package performance API rust

  Xmake is a lightweight cross-platform build utility based on Lua.

  It is very lightweight and has no dependencies because it has a built-in Lua runtime.

  It uses xmake.lua to maintain project builds and its configuration syntax is very simple and readable.

  We can use it to build project directly like Make/Ninja, or generate project files like CMake/Meson, and it also has a built-in package management system to help users solve the integrated use of C/C++ dependent libraries.

  Xmake = Build backend + Project Generator + Package Manager + [Remote|Distributed] Build + Cache

  Although not very precise, we can still understand Xmake in the following way:

  Xmake ≈ Make/Ninja + CMake/Meson + Vcpkg/Conan + distcc + ccache/sccache

  • Github
  • Document

  

  Introduction of new features

  Before introducing new features, we have good news to tell you that Xmake has recently entered Debian’s official repository:https://packages.debian.org/sid/xmake,When Ubuntu 24.04 is released in April next year, we should be able to quickly install Xmake directly through theapt install xmake command.

  I would also like to thank @Lance Lin for his help. He helped us maintain and upload the Xmake package to the Debian repository throughout the whole process. Thank you very much!

  Next, let’s introduce some changes introduced in version 2.8.5. This version brings many new features, especially support for link sorting, link groups, and support forxmake test built-in unit tests.In addition, we have also added build support for the Apple XROS platform, which can be used to build programs on Apple’s new VisionOS. We also provide a more flexible and versatilecheck_sizeof detection interface for quickly detecting the size of types.

  Link reordering support

  This is a requirement that has existed for more than two years and is mainly used to adjust the link order within the target.

  Since xmake providesadd_links,add_deps,add_packages,add_options interfaces, you can configure links in targets, dependencies, packages and options, although the link order ofadd_links itself can be adjusted according to the order of addition.

  However, the link order between links, deps and packages can only be generated in a fixed order and cannot be adjusted flexibly. This is a bit inadequate for some complex projects.

  In this version, we have completely solved this problem and added theadd_linkorders interface, which can be used to configure various link orders introduced by targets, dependencies, packages, options, and link groups.

  For more details and background, see:#1452

  Sort links

  In order to more flexibly adjust the various link orders within the target, we can implement it through the new interfaceadd_linkorders, for example:

  add_links("a","b","c","d","e")-- e -> b -> aadd_linkorders("e","b","a")--e->dadd_linkorders("e","d")

  add_links is the configured initial link order, and then we configure two local link dependenciese -> b -> a ande -> d through add_linkorders.

  xmake will internally generate a DAG graph based on these configurations, and use topological sorting to generate the final link sequence and provide it to the linker.

  Of course, if there is a circular dependency and a cycle is created, it will also provide warning information.

  Sorting links and link groups

  In addition, we can also solve the problem of circular dependencies by configuring link groups throughadd_linkgroups.

  Andadd_linkorders can also sort link groups.

  add_links("a","b","c","d","e")add_linkgroups("c","d",{name="foo",group=true})add_linkorders("e","linkgroup::foo")

  If we want to sort link groups, we need to give each link group a name,{name="foo"}, and then we can reference the configuration throughlinkgroup::foo inadd_linkorders.

  Sort links and frameworks

  We can also sort links and frameworks for macOS/iPhoneOS.

  add_links("a","b","c","d","e")add_frameworks("Foundation","CoreFoundation")add_linkorders("e","framework::CoreFoundation")

  阅读中文Read All

  ---

• Xmake v2.8.3 Released, Improve Wasm and Support Xmake Source Debugging

  2023-09-26

  xmake

  xmake lua C/C++ package performance API rust

  Xmake is a lightweight cross-platform build utility based on Lua.

  It is very lightweight and has no dependencies because it has a built-in Lua runtime.

  It uses xmake.lua to maintain project builds and its configuration syntax is very simple and readable.

  We can use it to build project directly like Make/Ninja, or generate project files like CMake/Meson, and it also has a built-in package management system to help users solve the integrated use of C/C++ dependent libraries.

  Xmake = Build backend + Project Generator + Package Manager + [Remote|Distributed] Build + Cache

  Although not very precise, we can still understand Xmake in the following way:

  Xmake ≈ Make/Ninja + CMake/Meson + Vcpkg/Conan + distcc + ccache/sccache

  • Github
  • Document

  

  Introduction of new features

  In the new version, we have added breakpoint debugging support for Xmake’s own source code, which can help contributors to get familiar with xmake’s source code more quickly, and also help users to debug and analyse their own project’s configure scripts.

  In addition, the number of packages in ourxmake-repo repository is about to exceed 1100, with more than 100 packages added in just one month, thanks to @star-hengxing’s contribution.

  At the same time, we focused on improving build support for Wasm and Qt6 for wasm.

  Breakpoint Debugging Xmake

  In version 2.8.3, we added Lua breakpoint debugging support, withVSCode-EmmyLua plugin, we can easily debug Xmake source code in VSCode breakpoints.

  First of all, we need to install VSCode-EmmyLua plugin in VSCode’s plugin market, and then run the following command to update the xmake-repo repository to keep it up-to-date.

  $xrepo update-repo

  !> Xmake also needs to be kept up to date.

  Then, execute the following command in your own project directory:

  $xrepo env -b emmylua_debugger -- xmake build

  Thexrepo env -b emmylua_debugger is used to bind the EmmyLua debugger plugin environment, and the arguments after-- are the actual xmake commands we need to debug.

  Usually we just debug thexmake build build, but if you want to debug other commands, you can tweak it yourself, for example, if you want to debug thexmake install -o /tmp install command, you can change it to:

  $xrepo env -b emmylua_debugger -- xmake install -o /tmp

  After executing the above command, it will not exit immediately, it will remain in a waiting debugging state, possibly without any output.

  At this point, instead of exiting it, let’s go ahead and open VSCode and open Xmake’s Lua script source directory in VSCode.

  That is, this directory:Xmake Lua Scripts, which we can download locally or directly open the lua script directory in the Xmake installation directory.

  Then switch to VSCode’s debugging tab and clickRunDebug ->Emmylua New Debug to connect to ourxmake build command debugger and start debugging.

  As you can see below, the default start breakpoint will automatically break insidedebugger:_start_emmylua_debugger, and we can click on the single-step to jump out of the current function, which will take us to the main entry.

  

  Then set your own breakpoint and click Continue to Run to break to the code location you want to debug.

  We can also set breakpoints in our project’s configuration scripts, which also allows us to quickly debug our own configuration scripts, not just Xmake’s own source code.

  

  阅读中文Read All

  ---