perldebguts - Guts of Perl debugging
This is not the perldebug(1) manpage, which tells you how to use the debugger. This manpage describes low-level details ranging between difficult and impossible for anyone who isn't incredibly intimate with Perl's guts to understand. Caveat lector.
Perl has special debugging hooks at compile-time and run-time used to create debugging environments. These hooks are not to be confused with theperl -Dxxx command described inperlrun, which is usable only if a special Perl is built per the instructions in theINSTALL podpage in the Perl source tree.
For example, whenever you call Perl's built-incaller function from the package DB, the arguments that the corresponding stack frame was called with are copied to the @DB::args array. The general mechanisms is enabled by calling Perl with the-d switch, the following additional features are enabled (cf."$^P" in perlvar):
Perl inserts the contents of$ENV{PERL5DB} (orBEGIN {require 'perl5db.pl'} if not present) before the first line of your program.
Each array@{"_<$filename"} holds the lines of $filename for a file compiled by Perl. The same forevaled strings that contain subroutines, or which are currently being executed. The $filename forevaled strings looks like(eval 34). Code assertions in regexes look like(re_eval 19).
Values in this array are magical in numeric context: they compare equal to zero only if the line is not breakable.
Each hash%{"_<$filename"} contains breakpoints and actions keyed by line number. Individual entries (as opposed to the whole hash) are settable. Perl only cares about Boolean true here, although the values used byperl5db.pl have the form"$break_condition\0$action".
The same holds for evaluated strings that contain subroutines, or which are currently being executed. The $filename forevaled strings looks like(eval 34) or(re_eval 19).
Each scalar${"_<$filename"} contains"_<$filename". This is also the case for evaluated strings that contain subroutines, or which are currently being executed. The $filename forevaled strings looks like(eval 34) or(re_eval 19).
After eachrequired file is compiled, but before it is executed,DB::postponed(*{"_<$filename"}) is called if the subroutineDB::postponed exists. Here, the $filename is the expanded name of therequired file, as found in the values of %INC.
After each subroutinesubname is compiled, the existence of$DB::postponed{subname} is checked. If this key exists,DB::postponed(subname) is called if theDB::postponed subroutine also exists.
A hash%DB::sub is maintained, whose keys are subroutine names and whose values have the formfilename:startline-endline.filename has the form(eval 34) for subroutines defined insideevals, or(re_eval 19) for those within regex code assertions.
When the execution of your program reaches a point that can hold a breakpoint, theDB::DB() subroutine is called any of the variables $DB::trace, $DB::single, or $DB::signal is true. These variables are notlocalizable. This feature is disabled when executing insideDB::DB(), including functions called from it unless$^D & (1<<30) is true.
When execution of the program reaches a subroutine call, a call to&DB::sub(args) is made instead, with$DB::sub holding the name of the called subroutine. This doesn't happen if the subroutine was compiled in theDB package.)
Note that if&DB::sub needs external data for it to work, no subroutine call is possible until this is done. For the standard debugger, the$DB::deep variable (how many levels of recursion deep into the debugger you can go before a mandatory break) gives an example of such a dependency.
The minimal working debugger consists of one line
sub DB::DB {}which is quite handy as contents ofPERL5DB environment variable:
$ PERL5DB="sub DB::DB {}" perl -d your-scriptAnother brief debugger, slightly more useful, could be created with only the line:
sub DB::DB {print ++$i; scalar <STDIN>}This debugger would print the sequential number of encountered statement, and would wait for you to hit a newline before continuing.
The following debugger is quite functional:
{ package DB; sub DB {} sub sub {print ++$i, " $sub\n"; &$sub}}It prints the sequential number of subroutine call and the name of the called subroutine. Note that&DB::sub should be compiled into the packageDB.
At the start, the debugger reads your rc file (./.perldb or~/.perldb under Unix), which can set important options. This file may define a subroutine&afterinit to be executed after the debugger is initialized.
After the rc file is read, the debugger reads the PERLDB_OPTS environment variable and parses this as the remainder of aO ... line as one might enter at the debugger prompt.
The debugger also maintains magical internal variables, such as@DB::dbline,%DB::dbline, which are aliases for@{"::_<current_file"}%{"::_<current_file"}. Herecurrent_file is the currently selected file, either explicitly chosen with the debugger'sf command, or implicitly by flow of execution.
Some functions are provided to simplify customization. See"Options" in perldebug for description of options parsed byDB::parse_options(string). The functionDB::dump_trace(skip[, count]) skips the specified number of frames and returns a list containing information about the calling frames (all of them, ifcount is missing). Each entry is reference to a hash with keyscontext (either.,$, or@),sub (subroutine name, or info abouteval),args (undef or a reference to an array),file, andline.
The functionDB::print_trace(FH, skip[, count[, short]]) prints formatted info about caller frames. The last two functions may be convenient as arguments to<,<< commands.
Note that any variables and functions that are not documented in this manpages (or inperldebug) are considered for internal use only, and as such are subject to change without notice.
Theframe option can be used to control the output of frame information. For example, contrast this expression trace:
$ perl -de 42Stack dump during die enabled outside of evals.Loading DB routines from perl5db.pl patch level 0.94Emacs support available.Enter h or `h h' for help.main::(-e:1): 0 DB<1> sub foo { 14 } DB<2> sub bar { 3 } DB<3> t print foo() * bar()main::((eval 172):3): print foo() + bar();main::foo((eval 168):2):main::bar((eval 170):2):42with this one, once theOptionframe=2 has been set:
DB<4> O f=2 frame = '2' DB<5> t print foo() * bar()3: foo() * bar()entering main::foo 2: sub foo { 14 };exited main::fooentering main::bar 2: sub bar { 3 };exited main::bar42By way of demonstration, we present below a laborious listing resulting from setting yourPERLDB_OPTS environment variable to the valuef=n N, and runningperl -d -V from the command line. Examples use various values ofn are shown to give you a feel for the difference between settings. Long those it may be, this is not a complete listing, but only excerpts.
entering main::BEGIN entering Config::BEGIN Package lib/Exporter.pm. Package lib/Carp.pm. Package lib/Config.pm. entering Config::TIEHASH entering Exporter::import entering Exporter::exportentering Config::myconfig entering Config::FETCH entering Config::FETCH entering Config::FETCH entering Config::FETCHentering main::BEGIN entering Config::BEGIN Package lib/Exporter.pm. Package lib/Carp.pm. exited Config::BEGIN Package lib/Config.pm. entering Config::TIEHASH exited Config::TIEHASH entering Exporter::import entering Exporter::export exited Exporter::export exited Exporter::importexited main::BEGINentering Config::myconfig entering Config::FETCH exited Config::FETCH entering Config::FETCH exited Config::FETCH entering Config::FETCHin $=main::BEGIN() from /dev/null:0 in $=Config::BEGIN() from lib/Config.pm:2 Package lib/Exporter.pm. Package lib/Carp.pm. Package lib/Config.pm. in $=Config::TIEHASH('Config') from lib/Config.pm:644 in $=Exporter::import('Config', 'myconfig', 'config_vars') from /dev/null:0 in $=Exporter::export('Config', 'main', 'myconfig', 'config_vars') from liin @=Config::myconfig() from /dev/null:0 in $=Config::FETCH(ref(Config), 'package') from lib/Config.pm:574 in $=Config::FETCH(ref(Config), 'baserev') from lib/Config.pm:574 in $=Config::FETCH(ref(Config), 'PERL_VERSION') from lib/Config.pm:574 in $=Config::FETCH(ref(Config), 'PERL_SUBVERSION') from lib/Config.pm:574 in $=Config::FETCH(ref(Config), 'osname') from lib/Config.pm:574 in $=Config::FETCH(ref(Config), 'osvers') from lib/Config.pm:574in $=main::BEGIN() from /dev/null:0 in $=Config::BEGIN() from lib/Config.pm:2 Package lib/Exporter.pm. Package lib/Carp.pm. out $=Config::BEGIN() from lib/Config.pm:0 Package lib/Config.pm. in $=Config::TIEHASH('Config') from lib/Config.pm:644 out $=Config::TIEHASH('Config') from lib/Config.pm:644 in $=Exporter::import('Config', 'myconfig', 'config_vars') from /dev/null:0 in $=Exporter::export('Config', 'main', 'myconfig', 'config_vars') from lib/ out $=Exporter::export('Config', 'main', 'myconfig', 'config_vars') from lib/ out $=Exporter::import('Config', 'myconfig', 'config_vars') from /dev/null:0out $=main::BEGIN() from /dev/null:0in @=Config::myconfig() from /dev/null:0 in $=Config::FETCH(ref(Config), 'package') from lib/Config.pm:574 out $=Config::FETCH(ref(Config), 'package') from lib/Config.pm:574 in $=Config::FETCH(ref(Config), 'baserev') from lib/Config.pm:574 out $=Config::FETCH(ref(Config), 'baserev') from lib/Config.pm:574 in $=Config::FETCH(ref(Config), 'PERL_VERSION') from lib/Config.pm:574 out $=Config::FETCH(ref(Config), 'PERL_VERSION') from lib/Config.pm:574 in $=Config::FETCH(ref(Config), 'PERL_SUBVERSION') from lib/Config.pm:574in $=main::BEGIN() from /dev/null:0 in $=Config::BEGIN() from lib/Config.pm:2 Package lib/Exporter.pm. Package lib/Carp.pm. out $=Config::BEGIN() from lib/Config.pm:0 Package lib/Config.pm. in $=Config::TIEHASH('Config') from lib/Config.pm:644 out $=Config::TIEHASH('Config') from lib/Config.pm:644 in $=Exporter::import('Config', 'myconfig', 'config_vars') from /dev/null:0 in $=Exporter::export('Config', 'main', 'myconfig', 'config_vars') from lib/E out $=Exporter::export('Config', 'main', 'myconfig', 'config_vars') from lib/E out $=Exporter::import('Config', 'myconfig', 'config_vars') from /dev/null:0out $=main::BEGIN() from /dev/null:0in @=Config::myconfig() from /dev/null:0 in $=Config::FETCH('Config=HASH(0x1aa444)', 'package') from lib/Config.pm:574 out $=Config::FETCH('Config=HASH(0x1aa444)', 'package') from lib/Config.pm:574 in $=Config::FETCH('Config=HASH(0x1aa444)', 'baserev') from lib/Config.pm:574 out $=Config::FETCH('Config=HASH(0x1aa444)', 'baserev') from lib/Config.pm:574in $=CODE(0x15eca4)() from /dev/null:0 in $=CODE(0x182528)() from lib/Config.pm:2 Package lib/Exporter.pm. out $=CODE(0x182528)() from lib/Config.pm:0 scalar context return from CODE(0x182528): undef Package lib/Config.pm. in $=Config::TIEHASH('Config') from lib/Config.pm:628 out $=Config::TIEHASH('Config') from lib/Config.pm:628 scalar context return from Config::TIEHASH: empty hash in $=Exporter::import('Config', 'myconfig', 'config_vars') from /dev/null:0 in $=Exporter::export('Config', 'main', 'myconfig', 'config_vars') from lib/Exporter.pm:171 out $=Exporter::export('Config', 'main', 'myconfig', 'config_vars') from lib/Exporter.pm:171 scalar context return from Exporter::export: '' out $=Exporter::import('Config', 'myconfig', 'config_vars') from /dev/null:0 scalar context return from Exporter::import: ''In all cases shown above, the line indentation shows the call tree. If bit 2 offrame is set, a line is printed on exit from a subroutine as well. If bit 4 is set, the arguments are printed along with the caller info. If bit 8 is set, the arguments are printed even if they are tied or references. If bit 16 is set, the return value is printed, too.
When a package is compiled, a line like this
Package lib/Carp.pm.is printed with proper indentation.
There are two ways to enable debugging output for regular expressions.
If your perl is compiled with-DDEBUGGING, you may use the-Dr flag on the command line.
Otherwise, one canuse re 'debug', which has effects at compile time and run time. It is not lexically scoped.
The debugging output at compile time looks like this:
compiling RE `[bc]d(ef*g)+h[ij]k$' size 43 first at 1 1: ANYOF(11) 11: EXACT <d>(13) 13: CURLYX {1,32767}(27) 15: OPEN1(17) 17: EXACT <e>(19) 19: STAR(22) 20: EXACT <f>(0) 22: EXACT <g>(24) 24: CLOSE1(26) 26: WHILEM(0) 27: NOTHING(28) 28: EXACT <h>(30) 30: ANYOF(40) 40: EXACT <k>(42) 42: EOL(43) 43: END(0) anchored `de' at 1 floating `gh' at 3..2147483647 (checking floating) stclass `ANYOF' minlen 7The first line shows the pre-compiled form of the regex. The second shows the size of the compiled form (in arbitrary units, usually 4-byte words) and the labelid of the first node that does a match.
The last line (split into two lines above) contains optimizer information. In the example shown, the optimizer found that the match should contain a substringde at offset 1, plus substringgh at some offset between 3 and infinity. Moreover, when checking for these substrings (to abandon impossible matches quickly), Perl will check for the substringgh before checking for the substringde. The optimizer may also use the knowledge that the match starts (at thefirstid) with a character class, and the match cannot be shorter than 7 chars.
The fields of interest which may appear in the last line are
anchoredSTRINGatPOSfloatingSTRINGatPOS1..POS2See above.
matching floating/anchoredWhich substring to check first.
minlenThe minimal length of the match.
stclassTYPEType of first matching node.
noscanDon't scan for the found substrings.
isallMeans that the optimizer info is all that the regular expression contains, and thus one does not need to enter the regex engine at all.
GPOSSet if the pattern contains\G.
plusSet if the pattern starts with a repeated char (as inx+y).
implicitSet if the pattern starts with.*.
with evalSet if the pattern contain eval-groups, such as(?{ code }) and(??{ code }).
anchored(TYPE)If the pattern may match only at a handful of places, (withTYPE beingBOL,MBOL, orGPOS. See the table below.
If a substring is known to match at end-of-line only, it may be followed by$, as infloating `k'$.
The optimizer-specific info is used to avoid entering (a slow) regex engine on strings that will not definitely match. Ifisall flag is set, a call to the regex engine may be avoided even when the optimizer found an appropriate place for the match.
The rest of the output contains the list ofnodes of the compiled form of the regex. Each line has format
id:TYPEOPTIONAL-INFO (next-id)
Here are the possible types, with short descriptions:
# TYPE arg-description [num-args] [longjump-len] DESCRIPTION# Exit pointsENDnoEnd of program.SUCCEEDnoReturn from a subroutine, basically.# Anchors:BOLnoMatch "" at beginning of line.MBOLnoSame, assuming multiline.SBOLnoSame, assuming singleline.EOSnoMatch "" at end of string.EOLnoMatch "" at end of line.MEOLnoSame, assuming multiline.SEOLnoSame, assuming singleline.BOUNDnoMatch "" at any word boundaryBOUNDLnoMatch "" at any word boundaryNBOUNDnoMatch "" at any word non-boundaryNBOUNDLnoMatch "" at any word non-boundaryGPOSnoMatches where last m//g left off.# [Special] alternativesANYnoMatch any one character (except newline).SANYnoMatch any one character.ANYOFsvMatch character in (or not in) this class.ALNUMnoMatch any alphanumeric characterALNUMLnoMatch any alphanumeric char in localeNALNUMnoMatch any non-alphanumeric characterNALNUMLnoMatch any non-alphanumeric char in localeSPACEnoMatch any whitespace characterSPACELnoMatch any whitespace char in localeNSPACEnoMatch any non-whitespace characterNSPACELnoMatch any non-whitespace char in localeDIGITnoMatch any numeric characterNDIGITnoMatch any non-numeric character# BRANCHThe set of branches constituting a single choice are hooked#together with their "next" pointers, since precedence prevents#anything being concatenated to any individual branch. The#"next" pointer of the last BRANCH in a choice points to the#thing following the whole choice. This is also where the#final "next" pointer of each individual branch points; each#branch starts with the operand node of a BRANCH node.#BRANCHnodeMatch this alternative, or the next...# BACKNormal "next" pointers all implicitly point forward; BACK#exists to make loop structures possible.# not usedBACKnoMatch "", "next" ptr points backward.# LiteralsEXACTsvMatch this string (preceded by length).EXACTFsvMatch this string, folded (prec. by length).EXACTFLsvMatch this string, folded in locale (w/len).# Do nothingNOTHINGnoMatch empty string.# A variant of above which delimits a group, thus stops optimizationsTAILnoMatch empty string. Can jump here from outside.# STAR,PLUS'?', and complex '*' and '+', are implemented as circular#BRANCH structures using BACK. Simple cases (one character#per match) are implemented with STAR and PLUS for speed#and to minimize recursive plunges.#STARnodeMatch this (simple) thing 0 or more times.PLUSnodeMatch this (simple) thing 1 or more times.CURLYsv 2Match this simple thing {n,m} times.CURLYNno 2Match next-after-this simple thing #{n,m} times, set parens.CURLYMno 2Match this medium-complex thing {n,m} times.CURLYXsv 2Match this complex thing {n,m} times.# This terminator creates a loop structure for CURLYXWHILEMnoDo curly processing and see if rest matches.# OPEN,CLOSE,GROUPP...are numbered at compile time.OPENnum 1Mark this point in input as start of #n.CLOSEnum 1Analogous to OPEN.REFnum 1Match some already matched stringREFFnum 1Match already matched string, foldedREFFLnum 1Match already matched string, folded in loc.# grouping assertionsIFMATCHoff 1 2Succeeds if the following matches.UNLESSMoff 1 2Fails if the following matches.SUSPENDoff 1 1"Independent" sub-regex.IFTHENoff 1 1Switch, should be preceded by switcher .GROUPPnum 1Whether the group matched.# Support for long regexLONGJMPoff 1 1Jump far away.BRANCHJoff 1 1BRANCH with long offset.# The heavy workerEVALevl 1Execute some Perl code.# ModifiersMINMODnoNext operator is not greedy.LOGICALnoNext opcode should set the flag only.# This is not used yetRENUMoff 1 1Group with independently numbered parens.# This is not really a node, but an optimized away piece of a "long" node.# To simplify debugging output, we mark it as if it were a nodeOPTIMIZEDoffPlaceholder for dump.First of all, when doing a match, one may get no run-time output even if debugging is enabled. This means that the regex engine was never entered and that all of the job was therefore done by the optimizer.
If the regex engine was entered, the output may look like this:
Matching `[bc]d(ef*g)+h[ij]k$' against `abcdefg__gh__' Setting an EVAL scope, savestack=3 2 <ab> <cdefg__gh_> | 1: ANYOF 3 <abc> <defg__gh_> | 11: EXACT <d> 4 <abcd> <efg__gh_> | 13: CURLYX {1,32767} 4 <abcd> <efg__gh_> | 26: WHILEM0 out of 1..32767 cc=effff31c 4 <abcd> <efg__gh_> | 15: OPEN1 4 <abcd> <efg__gh_> | 17: EXACT <e> 5 <abcde> <fg__gh_> | 19: STAR EXACT <f> can match 1 times out of 32767... Setting an EVAL scope, savestack=3 6 <bcdef> <g__gh__> | 22: EXACT <g> 7 <bcdefg> <__gh__> | 24: CLOSE1 7 <bcdefg> <__gh__> | 26: WHILEM 1 out of 1..32767 cc=effff31c Setting an EVAL scope, savestack=12 7 <bcdefg> <__gh__> | 15: OPEN1 7 <bcdefg> <__gh__> | 17: EXACT <e> restoring \1 to 4(4)..7 failed, try continuation... 7 <bcdefg> <__gh__> | 27: NOTHING 7 <bcdefg> <__gh__> | 28: EXACT <h> failed...failed...The most significant information in the output is about the particularnode of the compiled regex that is currently being tested against the target string. The format of these lines is
STRING-OFFSET <PRE-STRING> <POST-STRING> |ID:TYPE
TheTYPE info is indented with respect to the backtracking level. Other incidental information appears interspersed within.
Perl is a profligate wastrel when it comes to memory use. There is a saying that to estimate memory usage of Perl, assume a reasonable algorithm for memory allocation, multiply that estimate by 10, and while you still may miss the mark, at least you won't be quite so astonished. This is not absolutely true, but may provide a good grasp of what happens.
Assume that an integer cannot take less than 20 bytes of memory, a float cannot take less than 24 bytes, a string cannot take less than 32 bytes (all these examples assume 32-bit architectures, the result are quite a bit worse on 64-bit architectures). If a variable is accessed in two of three different ways (which require an integer, a float, or a string), the memory footprint may increase yet another 20 bytes. A sloppy malloc(3) implementation can inflate these numbers dramatically.
On the opposite end of the scale, a declaration like
sub foo;may take up to 500 bytes of memory, depending on which release of Perl you're running.
Anecdotal estimates of source-to-compiled code bloat suggest an eightfold increase. This means that the compiled form of reasonable (normally commented, properly indented etc.) code will take about eight times more space in memory than the code took on disk.
There are two Perl-specific ways to analyze memory usage: $ENV{PERL_DEBUG_MSTATS} and-DL command-line switch. The first is available only if Perl is compiled with Perl's malloc(); the second only if Perl was built with-DDEBUGGING. See the instructions for how to do this in theINSTALL podpage at the top level of the Perl source tree.
$ENV{PERL_DEBUG_MSTATS}If your perl is using Perl's malloc() and was compiled with the necessary switches (this is the default), then it will print memory usage statistics after compiling your code when$ENV{PERL_DEBUG_MSTATS} > 1, and before termination of the program when$ENV{PERL_DEBUG_MSTATS} >= 1. The report format is similar to the following example:
$ PERL_DEBUG_MSTATS=2 perl -e "require Carp" Memory allocation statistics after compilation: (buckets 4(4)..8188(8192) 14216 free: 130 117 28 7 9 0 2 2 1 0 0437 61 36 0 5 60924 used: 125 137 161 55 7 8 6 16 2 0 1 74 109 304 84 20 Total sbrk(): 77824/21:119. Odd ends: pad+heads+chain+tail: 0+636+0+2048. Memory allocation statistics after execution: (buckets 4(4)..8188(8192) 30888 free: 245 78 85 13 6 2 1 3 2 0 1315 162 39 42 11 175816 used: 265 176 1112 111 26 22 11 27 2 1 1196 178 1066 798 39 Total sbrk(): 215040/47:145. Odd ends: pad+heads+chain+tail: 0+2192+0+6144.It is possible to ask for such a statistic at arbitrary points in your execution using the mstat() function out of the standard Devel::Peek module.
Here is some explanation of that format:
buckets SMALLEST(APPROX)..GREATEST(APPROX)Perl's malloc() uses bucketed allocations. Every request is rounded up to the closest bucket size available, and a bucket is taken from the pool of buckets of that size.
The line above describes the limits of buckets currently in use. Each bucket has two sizes: memory footprint and the maximal size of user data that can fit into this bucket. Suppose in the above example that the smallest bucket were size 4. The biggest bucket would have usable size 8188, and the memory footprint would be 8192.
In a Perl built for debugging, some buckets may have negative usable size. This means that these buckets cannot (and will not) be used. For larger buckets, the memory footprint may be one page greater than a power of 2. If so, case the corresponding power of two is printed in theAPPROX field above.
The 1 or 2 rows of numbers following that correspond to the number of buckets of each size betweenSMALLEST andGREATEST. In the first row, the sizes (memory footprints) of buckets are powers of two--or possibly one page greater. In the second row, if present, the memory footprints of the buckets are between the memory footprints of two buckets "above".
For example, suppose under the previous example, the memory footprints were
free: 8 16 32 64 128 256 512 1024 2048 4096 8192 4 12 24 48 80With non-DEBUGGING perl, the buckets starting from128 have a 4-byte overhead, and thus a 8192-long bucket may take up to 8188-byte allocations.
Total sbrk(): SBRKed/SBRKs:CONTINUOUSThe first two fields give the total amount of memory perl sbrk(2)ed (ess-broken? :-) and number of sbrk(2)s used. The third number is what perl thinks about continuity of returned chunks. So long as this number is positive, malloc() will assume that it is probable that sbrk(2) will provide continuous memory.
Memory allocated by external libraries is not counted.
pad: 0The amount of sbrk(2)ed memory needed to keep buckets aligned.
heads: 2192Although memory overhead of bigger buckets is kept inside the bucket, for smaller buckets, it is kept in separate areas. This field gives the total size of these areas.
chain: 0malloc() may want to subdivide a bigger bucket into smaller buckets. If only a part of the deceased bucket is left unsubdivided, the rest is kept as an element of a linked list. This field gives the total size of these chunks.
tail: 6144To minimize the number of sbrk(2)s, malloc() asks for more memory. This field gives the size of the yet unused part, which is sbrk(2)ed, but never touched.
Below we show how to analyse memory usage by
do 'lib/auto/POSIX/autosplit.ix';The file in question contains a header and 146 lines similar to
sub getcwd;WARNING: The discussion below supposes 32-bit architecture. In newer releases of Perl, memory usage of the constructs discussed here is greatly improved, but the story discussed below is a real-life story. This story is mercilessly terse, and assumes rather more than cursory knowledge of Perl internals. Type space to continue, `q' to quit. (Actually, you just want to skip to the next section.)
Here is the itemized list of Perl allocations performed during parsing of this file:
!!! "after" at test.pl line 3. Id subtot 4 8 12 16 20 24 28 32 36 40 48 56 64 72 80 80+ 0 02 13752 . . . . 294 . . . . . . . . . . 4 0 54 5545 . . 8 124 16 . . . 1 1 . . . . . 3 5 05 32 . . . . . . . 1 . . . . . . . . 6 02 7152 . . . . . . . . . . 149 . . . . . 7 02 3600 . . . . . 150 . . . . . . . . . . 7 03 64 . -1 . 1 . . 2 . . . . . . . . . 7 04 7056 . . . . . . . . . . . . . . . 7 7 17 38404 . . . . . . . 1 . . 442 149 . . 147 . 9 03 2078 17 249 32 . . . . 2 . . . . . . . .To see this list, insert twowarn('!...') statements around the call:
warn('!');do 'lib/auto/POSIX/autosplit.ix';warn('!!! "after"');and run it with Perl's-DL option. The first warn() will print memory allocation info before parsing the file and will memorize the statistics at this point (we ignore what it prints). The second warn() prints increments with respect to these memorized data. This is the printout shown above.
DifferentIds on the left correspond to different subsystems of the perl interpreter. They are just the first argument given to the perl memory allocation API named New(). To find what9 03 means, justgrep the perl source for903. You'll find it inutil.c, function savepvn(). (I know, you wonder why we told you togrep and then gave away the answer. That's because grepping the source is good for the soul.) This function is used to store a copy of an existing chunk of memory. Using a C debugger, one can see that the function was called either directly from gv_init() or via sv_magic(), and that gv_init() is called from gv_fetchpv()--which was itself called from newSUB(). Please stop to catch your breath now.
NOTE: To reach this point in the debugger and skip the calls to savepvn() during the compilation of the main program, you should set a C breakpoint in Perl_warn(), continue until this point is reached, andthen set a C breakpoint in Perl_savepvn(). Note that you may need to skip a handful of Perl_savepvn() calls that do not correspond to mass production of CVs (there are more903 allocations than 146 similar lines oflib/auto/POSIX/autosplit.ix). Note also thatPerl_ prefixes are added by macroization code in perl header files to avoid conflicts with external libraries.
Anyway, we see that903 ids correspond to creation of globs, twice per glob - for glob name, and glob stringification magic.
Here are explanations for otherIds above:
717Creates biggerXPV* structures. In the case above, it creates 3AVs per subroutine, one for a list of lexical variable names, one for a scratchpad (which contains lexical variables andtargets), and one for the array of scratchpads needed for recursion.
It also creates aGV and aCV per subroutine, all called from start_subparse().
002Creates a C array corresponding to theAV of scratchpads and the scratchpad itself. The first fake entry of this scratchpad is created though the subroutine itself is not defined yet.
It also creates C arrays to keep data for the stash. This is one HV, but it grows; thus, there are 4 big allocations: the big chunks are not freed, but are kept as additional arenas forSV allocations.
054Creates aHEK for the name of the glob for the subroutine. This name is a key in astash.
Big allocations with thisId correspond to allocations of new arenas to keepHE.
602Creates aGP for the glob for the subroutine.
702Creates theMAGIC for the glob for the subroutine.
704Createsarenas which keep SVs.
If Perl is run with-DL option, then warn()s that start with `!' behave specially. They print a list ofcategories of memory allocations, and statistics of allocations of different sizes for these categories.
If warn() string starts with
!!!print changed categories only, print the differences in counts of allocations.
!!print grown categories only; print the absolute values of counts, and totals.
!print nonempty categories, print the absolute values of counts and totals.
If an extension or external library does not use the Perl API to allocate memory, such allocations are not counted.
perldebug,perlguts,perlrunre, andDevel::Dprof.
4 POD Errors
The following errors were encountered while parsing the POD:
Perldoc Browser is maintained by Dan Book (DBOOK). Please contact him via theGitHub issue tracker oremail regarding any issues with the site itself, search, or rendering of documentation.
The Perl documentation is maintained by the Perl 5 Porters in the development of Perl. Please contact them via thePerl issue tracker, themailing list, orIRC to report any issues with the contents or format of the documentation.