HTML rendering created 2025-09-06 byMichael Kerrisk, author ofThe Linux Programming Interface. For details of in-depthLinux/UNIX system programming training courses that I teach, lookhere. Hosting byjambit GmbH. |  |
NAME |LIBRARY |SYNOPSIS |DESCRIPTION |RETURN VALUE |ERRORS |STANDARDS |HISTORY |EXAMPLES |SEE ALSO |COLOPHON | |
futex(2) System Calls Manualfutex(2)futex - fast user-space locking
Standard C library (libc,-lc)
#include <linux/futex.h>/* Definition ofFUTEX_*constants */#include <sys/syscall.h>/* Definition ofSYS_*constants */#include <unistd.h>long syscall(SYS_futex, uint32_t *uaddr, intop, ...);
Thefutex() system call provides a method for waiting until a certain condition becomes true. It is typically used as a blocking construct in the context of shared-memory synchronization. When using futexes, the majority of the synchronization operations are performed in user space. A user- space program employs thefutex() system call only when it is likely that the program has to block for a longer time until the condition becomes true. Otherfutex() operations can be used to wake any processes or threads waiting for a particular condition. A futex is a 32-bit value—referred to below as afutex word—whose address is supplied to thefutex() system call. (Futexes are 32 bits in size on all platforms, including 64-bit systems.) All futex operations are governed by this value. In order to share a futex between processes, the futex is placed in a region of shared memory, created using (for example)mmap(2) orshmat(2). (Thus, the futex word may have different virtual addresses in different processes, but these addresses all refer to the same location in physical memory.) In a multithreaded program, it is sufficient to place the futex word in a global variable shared by all threads. When executing a futex operation that requests to block a thread, the kernel will block only if the futex word has the value that the calling thread supplied (as one of the arguments of thefutex() call) as the expected value of the futex word. The loading of the futex word's value, the comparison of that value with the expected value, and the actual blocking will happen atomically and will be totally ordered with respect to concurrent operations performed by other threads on the same futex word. Thus, the futex word is used to connect the synchronization in user space with the implementation of blocking by the kernel. Analogously to an atomic compare-and-exchange operation that potentially changes shared memory, blocking via a futex is an atomic compare-and-block operation. One use of futexes is for implementing locks. The state of the lock (i.e., acquired or not acquired) can be represented as an atomically accessed flag in shared memory. In the uncontended case, a thread can access or modify the lock state with atomic instructions, for example atomically changing it from not acquired to acquired using an atomic compare-and-exchange instruction. (Such instructions are performed entirely in user mode, and the kernel maintains no information about the lock state.) On the other hand, a thread may be unable to acquire a lock because it is already acquired by another thread. It then may pass the lock's flag as a futex word and the value representing the acquired state as the expected value to afutex() wait operation. Thisfutex() operation will block if and only if the lock is still acquired (i.e., the value in the futex word still matches the "acquired state"). When releasing the lock, a thread has to first reset the lock state to not acquired and then execute a futex operation that wakes threads blocked on the lock flag used as a futex word (this can be further optimized to avoid unnecessary wake-ups). Seefutex(7) for more detail on how to use futexes. Besides the basic wait and wake-up futex functionality, there are further futex operations aimed at supporting more complex use cases. Note that no explicit initialization or destruction is necessary to use futexes; the kernel maintains a futex (i.e., the kernel- internal implementation artifact) only while operations such asFUTEX_WAIT(2const) are being performed on a particular futex word.Arguments Theuaddr argument points to the futex word. On all platforms, futexes are four-byte integers that must be aligned on a four-byte boundary. The operation to perform on the futex is specified in theop argument.Futex operations Theop argument consists of two parts: a command that specifies the operation to be performed, bitwise ORed with zero or more options that modify the behaviour of the operation. The options that may be included inop are as follows:FUTEX_PRIVATE_FLAG(since Linux 2.6.22) This option bit can be employed with all futex operations. It tells the kernel that the futex is process-private and not shared with another process (i.e., it is being used for synchronization only between threads of the same process). This allows the kernel to make some additional performance optimizations. As a convenience,<linux/futex.h> defines a set of constants with the suffix_PRIVATEthat are equivalents of all of the operations listed below, but with theFUTEX_PRIVATE_FLAGORed into the constant value. Thus, there areFUTEX_WAIT_PRIVATE,FUTEX_WAKE_PRIVATE, and so on.FUTEX_CLOCK_REALTIME(since Linux 2.6.28) This option bit can be employed only with theFUTEX_WAIT_BITSET(2const),FUTEX_WAIT_REQUEUE_PI(2const), (since Linux 4.5)FUTEX_WAIT(2const), and (since Linux 5.14)FUTEX_LOCK_PI2(2const) operations. If this option is set, the kernel measures thetimeout against theCLOCK_REALTIMEclock. If this option is not set, the kernel measures thetimeout against theCLOCK_MONOTONICclock. The operation specified inop is one of the following:FUTEX_WAIT(2const)FUTEX_WAKE(2const)FUTEX_FD(2const)FUTEX_REQUEUE(2const)FUTEX_CMP_REQUEUE(2const)FUTEX_WAKE_OP(2const)FUTEX_WAIT_BITSET(2const)FUTEX_WAKE_BITSET(2const)Priority-inheritance futexes Linux supports priority-inheritance (PI) futexes in order to handle priority-inversion problems that can be encountered with normal futex locks. Priority inversion is the problem that occurs when a high-priority task is blocked waiting to acquire a lock held by a low-priority task, while tasks at an intermediate priority continuously preempt the low-priority task from the CPU. Consequently, the low-priority task makes no progress toward releasing the lock, and the high-priority task remains blocked. Priority inheritance is a mechanism for dealing with the priority- inversion problem. With this mechanism, when a high-priority task becomes blocked by a lock held by a low-priority task, the priority of the low-priority task is temporarily raised to that of the high-priority task, so that it is not preempted by any intermediate level tasks, and can thus make progress toward releasing the lock. To be effective, priority inheritance must be transitive, meaning that if a high-priority task blocks on a lock held by a lower-priority task that is itself blocked by a lock held by another intermediate-priority task (and so on, for chains of arbitrary length), then both of those tasks (or more generally, all of the tasks in a lock chain) have their priorities raised to be the same as the high-priority task. From a user-space perspective, what makes a futex PI-aware is a policy agreement (described below) between user space and the kernel about the value of the futex word, coupled with the use of the PI-futex operations described below. (Unlike the other futex operations described above, the PI-futex operations are designed for the implementation of very specific IPC mechanisms.) The PI-futex operations described below differ from the other futex operations in that they impose policy on the use of the value of the futex word: • If the lock is not acquired, the futex word's value shall be 0. • If the lock is acquired, the futex word's value shall be the thread ID (TID; seegettid(2)) of the owning thread. • If the lock is owned and there are threads contending for the lock, then theFUTEX_WAITERSbit shall be set in the futex word's value; in other words, this value is: FUTEX_WAITERS | TID (Note that is invalid for a PI futex word to have no owner andFUTEX_WAITERSset.) With this policy in place, a user-space application can acquire an unacquired lock or release a lock using atomic instructions executed in user mode (e.g., a compare-and-swap operation such ascmpxchg on the x86 architecture). Acquiring a lock simply consists of using compare-and-swap to atomically set the futex word's value to the caller's TID if its previous value was 0. Releasing a lock requires using compare-and-swap to set the futex word's value to 0 if the previous value was the expected TID. If a futex is already acquired (i.e., has a nonzero value), waiters must employ theFUTEX_LOCK_PI(2const) orFUTEX_LOCK_PI2(2const) operations to acquire the lock. If other threads are waiting for the lock, then theFUTEX_WAITERSbit is set in the futex value; in this case, the lock owner must employ theFUTEX_UNLOCK_PI(2const) operation to release the lock. In the cases where callers are forced into the kernel (i.e., required to perform afutex() call), they then deal directly with a so-called RT-mutex, a kernel locking mechanism which implements the required priority-inheritance semantics. After the RT-mutex is acquired, the futex value is updated accordingly, before the calling thread returns to user space. It is important to note that the kernel will update the futex word's value prior to returning to user space. (This prevents the possibility of the futex word's value ending up in an invalid state, such as having an owner but the value being 0, or having waiters but not having theFUTEX_WAITERSbit set.) If a futex has an associated RT-mutex in the kernel (i.e., there are blocked waiters) and the owner of the futex/RT-mutex dies unexpectedly, then the kernel cleans up the RT-mutex and hands it over to the next waiter. This in turn requires that the user- space value is updated accordingly. To indicate that this is required, the kernel sets theFUTEX_OWNER_DIEDbit in the futex word along with the thread ID of the new owner. User space can detect this situation via the presence of theFUTEX_OWNER_DIEDbit and is then responsible for cleaning up the stale state left over by the dead owner. PI futexes are operated on by specifying one of the values listed below inop. Note that the PI futex operations must be used as paired operations and are subject to some additional requirements: •FUTEX_LOCK_PI(2const),FUTEX_LOCK_PI2(2const), andFUTEX_TRYLOCK_PI(2const) pair withFUTEX_UNLOCK_PI(2const).FUTEX_UNLOCK_PI(2const) must be called only on a futex owned by the calling thread, as defined by the value policy, otherwise the errorEPERMresults. •FUTEX_WAIT_REQUEUE_PI(2const) pairs withFUTEX_CMP_REQUEUE_PI(2const). This must be performed from a non-PI futex to a distinct PI futex (or the errorEINVAL results). Additionally, the number of waiters to be woken must be 1 (or the errorEINVALresults). The PI futex operations are as follows:FUTEX_LOCK_PI(2const)FUTEX_LOCK_PI2(2const)FUTEX_TRYLOCK_PI(2const)FUTEX_UNLOCK_PI(2const)FUTEX_CMP_REQUEUE_PI(2const)FUTEX_WAIT_REQUEUE_PI(2const) TheFUTEX_WAIT_REQUEUE_PI(2const) andFUTEX_CMP_REQUEUE_PI(2const) were added to support a fairly specific use case: support for priority-inheritance-aware POSIX threads condition variables. The idea is that these operations should always be paired, in order to ensure that user space and the kernel remain in sync. Thus, in theFUTEX_WAIT_REQUEUE_PI(2const) operation, the user-space application pre-specifies the target of the requeue that takes place in theFUTEX_CMP_REQUEUE_PI(2const) operation.
On error, -1 is returned, anderrno is set to indicate the error. The return value on success depends on the operation.
EACCESNo read access to the memory of a futex word.EFAULTuaddr did not point to a valid user-space address.EINVALuaddr does not point to a valid object—that is, the address is not four-byte-aligned.EINVALInvalid argument.ENOSYSInvalid operation specified inop.ENOSYSTheFUTEX_CLOCK_REALTIMEoption was specified inop, but the accompanying operation was neitherFUTEX_WAIT_BITSET(2const),FUTEX_WAIT_REQUEUE_PI(2const), norFUTEX_LOCK_PI2(2const).
Linux.
Linux 2.6.0. Initial futex support was merged in Linux 2.5.7 but with different semantics from what was described above. A four-argument system call with the semantics described in this page was introduced in Linux 2.5.40. A fifth argument was added in Linux 2.5.70, and a sixth argument was added in Linux 2.6.7.
The program below demonstrates use of futexes in a program where a parent process and a child process use a pair of futexes located inside a shared anonymous mapping to synchronize access to a shared resource: the terminal. The two processes each writenloops (a command-line argument that defaults to 5 if omitted) messages to the terminal and employ a synchronization protocol that ensures that they alternate in writing messages. Upon running this program we see output such as the following: $./futex_demo; Parent (18534) 0 Child (18535) 0 Parent (18534) 1 Child (18535) 1 Parent (18534) 2 Child (18535) 2 Parent (18534) 3 Child (18535) 3 Parent (18534) 4 Child (18535) 4Program source /* futex_demo.c Usage: futex_demo [nloops] (Default: 5) Demonstrate the use of futexes in a program where parent and child use a pair of futexes located inside a shared anonymous mapping to synchronize access to a shared resource: the terminal. The two processes each write 'num-loops' messages to the terminal and employ a synchronization protocol that ensures that they alternate in writing messages. */ #define _GNU_SOURCE #include <err.h> #include <errno.h> #include <linux/futex.h> #include <stdatomic.h> #include <stdint.h> #include <stdio.h> #include <stdlib.h> #include <sys/mman.h> #include <sys/syscall.h> #include <sys/time.h> #include <sys/wait.h> #include <unistd.h> static uint32_t *futex1, *futex2, *iaddr; static int futex(uint32_t *uaddr, int op, uint32_t val, const struct timespec *timeout, uint32_t *uaddr2, uint32_t val3) { return syscall(SYS_futex, uaddr, op, val, timeout, uaddr2, val3); } /* Acquire the futex pointed to by 'futexp': wait for its value to become 1, and then set the value to 0. */ static void fwait(uint32_t *futexp) { long s; const uint32_t one = 1; /* atomic_compare_exchange_strong(ptr, oldval, newval) atomically performs the equivalent of: if (*ptr == *oldval) *ptr = newval; It returns true if the test yielded true and *ptr was updated. */ while (1) { /* Is the futex available? */ if (atomic_compare_exchange_strong(futexp, &one, 0)) break; /* Yes */ /* Futex is not available; wait. */ s = futex(futexp, FUTEX_WAIT, 0, NULL, NULL, 0); if (s == -1 && errno != EAGAIN) err(EXIT_FAILURE, "futex-FUTEX_WAIT"); } } /* Release the futex pointed to by 'futexp': if the futex currently has the value 0, set its value to 1 and then wake any futex waiters, so that if the peer is blocked in fwait(), it can proceed. */ static void fpost(uint32_t *futexp) { long s; const uint32_t zero = 0; /* atomic_compare_exchange_strong() was described in comments above. */ if (atomic_compare_exchange_strong(futexp, &zero, 1)) { s = futex(futexp, FUTEX_WAKE, 1, NULL, NULL, 0); if (s == -1) err(EXIT_FAILURE, "futex-FUTEX_WAKE"); } } int main(int argc, char *argv[]) { pid_t childPid; unsigned int nloops; setbuf(stdout, NULL); nloops = (argc > 1) ? atoi(argv[1]) : 5; /* Create a shared anonymous mapping that will hold the futexes. Since the futexes are being shared between processes, we subsequently use the "shared" futex operations (i.e., not the ones suffixed "_PRIVATE"). */ iaddr = mmap(NULL, sizeof(*iaddr) * 2, PROT_READ | PROT_WRITE, MAP_ANONYMOUS | MAP_SHARED, -1, 0); if (iaddr == MAP_FAILED) err(EXIT_FAILURE, "mmap"); futex1 = &iaddr[0]; futex2 = &iaddr[1]; *futex1 = 0; /* State: unavailable */ *futex2 = 1; /* State: available */ /* Create a child process that inherits the shared anonymous mapping. */ childPid = fork(); if (childPid == -1) err(EXIT_FAILURE, "fork"); if (childPid == 0) { /* Child */ for (unsigned int j = 0; j < nloops; j++) { fwait(futex1); printf("Child (%jd) %u\n", (intmax_t) getpid(), j); fpost(futex2); } exit(EXIT_SUCCESS); } /* Parent falls through to here. */ for (unsigned int j = 0; j < nloops; j++) { fwait(futex2); printf("Parent (%jd) %u\n", (intmax_t) getpid(), j); fpost(futex1); } wait(NULL); exit(EXIT_SUCCESS); }get_robust_list(2),restart_syscall(2),pthread_mutexattr_getprotocol(3),futex(7),sched(7) The following kernel source files: •Documentation/pi-futex.txt •Documentation/futex-requeue-pi.txt •Documentation/locking/rt-mutex.txt •Documentation/locking/rt-mutex-design.txt •Documentation/robust-futex-ABI.txt Franke, H., Russell, R., and Kirwood, M., 2002.Fuss, Futexes and Furwocks: Fast Userlevel Locking in Linux ⟨http://kernel.org/doc/ols/2002/ols2002-pages-479-495.pdf⟩ (from proceedings of the Ottawa Linux Symposium 2002). Hart, D., 2009.A futex overview and update ⟨http://lwn.net/Articles/360699/⟩. Hart, D. and Guniguntala, D., 2009.Requeue-PI: Making glibcCondvars PI-Aware ⟨http://lwn.net/images/conf/rtlws11/papers/proc/p10.pdf⟩ (from proceedings of the 2009 Real-Time Linux Workshop). Drepper, U., 2011.Futexes Are Tricky ⟨http://www.akkadia.org/drepper/futex.pdf⟩. Futex example library, futex-*.tar.bz2 ⟨https://mirrors.kernel.org/pub/linux/kernel/people/rusty/⟩.
This page is part of theman-pages (Linux kernel and C library user-space interface documentation) project. Information about the project can be found at ⟨https://www.kernel.org/doc/man-pages/⟩. If you have a bug report for this manual page, see ⟨https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/tree/CONTRIBUTING⟩. This page was obtained from the tarball man-pages-6.15.tar.gz fetched from ⟨https://mirrors.edge.kernel.org/pub/linux/docs/man-pages/⟩ on 2025-08-11. If you discover any rendering problems in this HTML version of the page, or you believe there is a better or more up- to-date source for the page, or you have corrections or improvements to the information in this COLOPHON (which isnot part of the original manual page), send a mail to man-pages@man7.orgLinux man-pages 6.15 2025-05-30futex(2)Pages that refer to this page:clone(2), eventfd(2), FUTEX_CMP_REQUEUE(2const), FUTEX_CMP_REQUEUE_PI(2const), FUTEX_FD(2const), FUTEX_LOCK_PI2(2const), FUTEX_LOCK_PI(2const), FUTEX_REQUEUE(2const), FUTEX_TRYLOCK_PI(2const), FUTEX_UNLOCK_PI(2const), FUTEX_WAIT(2const), FUTEX_WAIT_BITSET(2const), FUTEX_WAIT_REQUEUE_PI(2const), FUTEX_WAKE(2const), FUTEX_WAKE_OP(2const), get_robust_list(2), mprotect(2), PR_FUTEX_HASH(2const), PR_SET_TIMERSLACK(2const), restart_syscall(2), set_tid_address(2), syscalls(2), io_uring_prep_futex_wait(3), io_uring_prep_futex_waitv(3), io_uring_prep_futex_wake(3), futex(7), pthreads(7), signal(7)
Copyright and license for this manual page
HTML rendering created 2025-09-06 byMichael Kerrisk, author ofThe Linux Programming Interface. For details of in-depthLinux/UNIX system programming training courses that I teach, lookhere. Hosting byjambit GmbH. | |