MCC Universal Library for Linux

• UpdatedJan 17, 2024
• C

Handle multiple buttons using single analog pin for ESP32

• UpdatedDec 27, 2019
• C++

This script shows how to use nidaqmx package to simultaneously and continuously write to and read from an NI DAQ measurement card analog I/O's.

• UpdatedApr 4, 2021
• Python

Teensy ADC with DMA and dual buffer server

• UpdatedFeb 14, 2019
• C++

BLE Automation-IO server on Adafruit device, with pythonista and/or raspberry AIOS-client

• UpdatedJan 31, 2021
• Python

a 10k mechanical keypad with support for variable input hall effect switches

• UpdatedJan 20, 2025

Utility scripts and diagnostics for Arduino boards — modular, reusable, and hardware-focused.

• UpdatedOct 22, 2025
• C++

This repository contains the source code and documentation of a one week project called FAJKER. It's purpose is to make time tracking on construction sites easier.

• UpdatedApr 11, 2019
• C++

Teensy 3.x/LC ADC implementation

• UpdatedMay 13, 2021
• C++

c++11 header files that can be used by your c++ programs

• UpdatedDec 31, 2019
• C++

Arduino library for the 7Semi ADS7830 8-Channel 8-Bit ADC Module over I2C. Reads analog voltage from up to 8 channels.

• UpdatedSep 9, 2025
• C++

Teensy 3.x ADC with DMA internal clock

• UpdatedFeb 12, 2019
• C++

• UpdatedFeb 14, 2019
• C++

This Arduino project involves measuring both AC and DC voltages using the ZMPT101B voltage sensor and an analog pin, respectively. The AC voltage is read from the ZMPT101B sensor connected to pin A0, while the DC voltage is read from an analog pin (A1). The measured values are displayed on a 16x2 LCD screen with I2C communication and printed via Se

• UpdatedJun 27, 2024
• C++

This simple application captures data from NIDAQ devices and stores it on disk.

• UpdatedOct 12, 2023
• C#

Contains applications of voltage and current measurement with Arduino. The voltage measurement application reads the voltage through an analog input connected in parallel with resistors R1 and R2. The current measurement application reads the current through an analog input.

• UpdatedMar 6, 2025
• C++

Provides nodes to access EWIO2 interfaces like IOs and metering - from Node-RED

• UpdatedApr 11, 2025
• JavaScript

Gathers software elements allowing to abstract the Arduino plateform for hardware I/O management.

• UpdatedOct 22, 2024
• C

This device reads 4 analog signals at 16 bits with very low noise.

• UpdatedOct 29, 2025
• C#

🔌 Simplify analog signal acquisition with the 7Semi ADS7830 library for Arduino, supporting efficient I2C communication and various microcontrollers.

• UpdatedNov 6, 2025
• C++