|
| 1 | +MicroPython port to Zephyr RTOS |
| 2 | +=============================== |
| 3 | + |
| 4 | +This is an initial port of MicroPython to Zephyr RTOS |
| 5 | +(http://zephyrproject.org). |
| 6 | + |
| 7 | +The port integrates well with Zephyr build system, using the latest |
| 8 | +features which will be available in 1.6.0, and thus requires Zephyr |
| 9 | +master to build against. All boards supported by Zephyr should be |
| 10 | +supported (but not all were tested). |
| 11 | + |
| 12 | +At this time, only basic interactive prompt (REPL) over UART connection |
| 13 | +is supported. Over time, bindings for various Zephyr subsystems may |
| 14 | +be added. |
| 15 | + |
| 16 | + |
| 17 | +Building |
| 18 | +-------- |
| 19 | + |
| 20 | +Follow to Zephyr web site for Getting Started instruction of installing |
| 21 | +Zephyr SDK, getting Zephyr source code, and setting up development |
| 22 | +environment. (Direct link: |
| 23 | +https://www.zephyrproject.org/doc/getting_started/getting_started.html). |
| 24 | +You may want to build Zephyr's own sample applications to make sure your |
| 25 | +setup is correct. |
| 26 | + |
| 27 | +To build MicroPython port, in the port subdirectory (zephyr/), run: |
| 28 | + |
| 29 | +make BOARD=<board> |
| 30 | + |
| 31 | +If you don't specify BOARD, the default is`qemu_x86` (x86 target running |
| 32 | +in QEMU emulator). Consult Zephyr documentation above for the list of |
| 33 | +supported boards. |
| 34 | + |
| 35 | + |
| 36 | +Running |
| 37 | +------- |
| 38 | + |
| 39 | +To run the resulting application in QEMU (for BOARDs like qemu_x86, |
| 40 | +qemu_cortex_m3): |
| 41 | + |
| 42 | +make qemu |
| 43 | + |
| 44 | +For deploying/flashing teh application on a real board, follow Zephyr |
| 45 | +documentation for a given board. |